Container turning device - roller block
MECHACON - HEINRICHSGLÜCK - TR150M-ST

Year of construction

2013

Condition

Used

Location

Minden

Container turning device - roller block MECHACON - HEINRICHSGLÜCK - TR150M-ST

Show map

Machine data

Machine type:: Container turning device - roller block

Model:: MECHACON - HEINRICHSGLÜCK - TR150M-ST

Year of construction:: 2013

Condition:: used

Price & Location

Location:: D - 32423 Minden

Call

Details about the offer

Listing ID:: A16662906

Reference number:: 3686

Update:: 09.01.2025

Description

mobile turning device with hydraulic height and lateral
displacement

load capacity 8 x 150 tons

component diameter 5,000 up to 12,000 mm

several turning devices must be installed to weld the
segments

total load capacity 1,200 tons maximum
Djdpfet Run Ijx Aa Nsut

steel support rollers

*support rollers can be adjusted in three axes under load*

- moving - roller axis: + / - 50 mm

- stroke - height adjustment: 0 bis 150 mm

- thrust travel - cross adjustment: + / - 50 mm

two height-adjustable drive units - type TR15 - M - year of
construction 2010

load capacity 15,000 kg per roller

roller diameter 559 mm - roller width 300 mm

drive torque 2 x ca. M = 3,500 Nm

connected load 3 KW per drive unit

manual hydraulic roller feed

rotational speed stepless 100 up to 2,000 mm/min by handheld
remote control

second drive unit can be operated by radio remote controle

The entire system is designed for transportation in nine
20ft containers for worldwide use.

total weight of the plant approx. 130 to

Documents

16662906-01.pdf

Seller

Registered since: 2007

79 listings online

Call

Send inquiry

Telephone & Fax

+49 571 7... show

+49 571 3... show

Fax:

These listings may also fit your interest.

Listing

Voerde (Niederrhein)

7,022 km

Chamber filter press

Call

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Duedeqakbropfx Aa Nst Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

See details

Listing

Thisted

6,917 km

SAMSON DIVERSE STEAM VALVES
Samson

Call

Listing

Horizontal band saw Bernardo HBS 275 - 400 V

Mudersbach

6,933 km

Horizontal band saw
BernardoHBS 275 - 400 V

€2,150

ONO plus VAT

Call

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Dujdpfed Du T Isx Aa Net Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

See details

Listing

Salach

6,801 km

Forging Hammer
BECHEL 5

Call

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t Duedpsvzxpbjfx Aa Njt dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

See details

Listing

Częstochowa

6,149 km

Welding robot
OKIOAB6-C1400

Call

Listing

Clutch for lathe CU500/CU400M ZMM SLIVEN Bulgaria CU-500 CU400

Gola

6,249 km

Clutch for lathe CU500/CU400M
ZMM SLIVEN BulgariaCU-500 CU400

Call

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Dusdpfx Asv Rpn Tja Net

See details

Listing

Turntable Welding table Heinrichsglück - Mechacon Horizontaldrehtisch HDT10.000-P1.500

Soest

6,922 km

Turntable Welding table
Heinrichsglück - MechaconHorizontaldrehtisch HDT10.000-P1.500

Call

Listing

Germany

6,955 km

Decoiler - expansion mandrel 20 t
SAG

Call

Listing

Single Column Press - Hydraulic WMW Zeulenroda PYE 160 S1

Germany

6,627 km

Single Column Press - Hydraulic
WMW ZeulenrodaPYE 160 S1

Call

Condition: used, Year of construction: 1983, Technical details: Dsdpju Nfvujfx Aa Njut Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

See details

Listing

Bending machine horizontal SCHÄFER 4-Walzen Rundbiegemaschine

Ennepetal

6,975 km

Bending machine horizontal
SCHÄFER4-Walzen Rundbiegemaschine

Call

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For Dodpfx Ajuddcaoa Neut semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

See details

Advertise here