Used Henning U6 /1000 for sale (8,512)

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Codey El Ttspfx Aa Nerb Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Credpfx Aasy Ndfpj Neb

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Crsdpfx Ajy Ndfioa Nsb

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, total width: 1,050 mm, total length: 1,175 mm, total height: 1,600 mm, input frequency: 50 Hz, input current: 10 A, empty load weight: 300 kg, electrical fuse: 16 A, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, type of input current: three-phase, cone rounder Model: KCM 1000 Output max. 1200 pieces/hour Stainless steel version with flour Teflon-coated cones and troughs Effective path approx. 3.5 m Knitting channels adjustable for dough weight from 300 to 1200 g machine mobile Connection 400V, 0.75 kW, 16A-CEE plug Dimensions approx: 1050 x 1150 x 1600 mm, WxDxH Crodpfx Aash H Sq Tj Njb Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Cedpfegd Iagjx Aa Nerb Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: excellent (used), After repair in 2022. Swing mm 400 Crjdpfxeyzpyco Aa Njb Distance between centres mm 1000 Grinding wheel: diameter x hole x width mm 500 x 80 x 203 Taper in spindle Morse 5 Max. workpiece weight between centres kg 300 Grinding spindle revolutions r.p.m. 1720, 1980 Cross motion of grinding spindle mm 415 Motor output kW 9,5 Total input kVA 16 Machine dimensions: length mm 4890 width mm 2320 Machine weight kg 5150

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT Csdpjxwvrusfx Aa Nerb - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) Cedpfxjy D Rnys Aa Njrb • Turret: 12 station VDI 40 Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm Crsdpfx Asy D N Aioa Nob • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 60180, Republic Lagun VBM vertical spindle surface grinding machine 1000-F Credpfx Ajy Ey Dtsa Nsb

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Credpfx Aaoft U Sas Neb Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Codpfxod Sblms Aa Nerb Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Cjdpfoyrfgrex Aa Njrb Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Crodpfx Aaoy Edc Hj Neb Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Cjdpsvt Dwbjfx Aa Nerb Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: excellent (used), Year of construction: 2012, operating hours: 15,700 h, functionality: fully functional, punching force: 16 t, total height: 2,155 mm, total width: 4,130 mm, total length: 5,840 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 1,250 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 150 kg, overall weight: 8,000 kg, space requirement width: 4,130 mm, space requirement length: 5,840 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, Equipment: safety light barrier, For sale: 1x TruPunch 1000 Compact Edition (1250 mm x 1250 mm) - Only 15,700 operating hours! - Brush table - Year of manufacture: 2012 - 10 tool stations, 2 clamps - Control system based on Bosch CML45 with 15" TFT color display - Dual-beam light barriers The machine was purchased directly from Trumpf in 2015. It was originally a 2012 demonstration machine, previously used in Trumpf’s training workshop (very low hours there). Subsequently, it was operated in our facility in single-shift production for manufacturing welding equipment enclosures, which accounts for the low total of only 15,700 operating hours. It has been used exclusively for light sheet metal, primarily mild steel sheets of 1.25 mm and 2.0 mm thickness, and occasionally 3 mm. No heavier materials processed. No known defects; the machine is still in use and will be available from May 2026. Reason for sale: discontinuation of production. The “Compact Edition” of the TP1000 is optimized for part sizes up to 1250x1250 mm. Larger formats are possible using the “repositioning” function, which requires additional tables. The standout advantage of the “Compact” design is its minimal footprint of just 4.13 x 5.84 m. The machine is equipped with almost every available option: Crodpfey Iv I Tjx Aa Nob - MultiShear function - Thread forming function - Marking/Fast Beading function - Deburring and rolling technology - Part chute sensor Asking price for the machine: €42,000 plus VAT. Excludes accessories, price ex-works, loading and transport at buyer’s cost. Machine available from May 2026. Optional programming and accessories: - Fully configured workstation (PC) with installed software. Only needs to be connected to the network and is immediately ready for use (saves significant time & money). “TruTops Punch” accessible via network - 10 RTC cassettes - 2 MultiTools with 5 tools each (ideal for this machine!) - Various tools (including 2 x louver tools, round, rectangular, and slitting tools) - Tool adjustment aid Asking price for accessories: €3,000 plus VAT.

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change Csdpfx Aaey D Nyus Njrb - Prior sale reserved - For further information, feel free to contact us.

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Codpfxshv A A Ds Aa Njrb Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: new, Year of construction: 2024, Welding rotary table 1000 Kg load capacity with hand and foot remote control diameter 1000 mm Bore 100mm height 580mm speed stepless 0 - 0,6 rpm Codpfogfqkwox Aa Nerb Motor AC 380 V

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm Credjulaxbspfx Aa Nob - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: used, Year of construction: 2017, AWEA AF 1000 VERTICAL MACHINING CENTRE Year: 2017 Manufacturer: AWEA MECHANTRONIC CO LTD Model: AF/AV Series CNC: FANUC Series Oi-MF TECHNICAL SPECIFICATIONS X axis travel: 1,020 mm Y axis travel: 550 mm Z axis travel: 635 mm Table dimensions: 1,200 x 550 mm T-slot size: 5 x 18 mm Table to floor distance: 915 mm Maximum table load: 500 kg X/Y axis rapid traverse: 36,000 mm/min Z axis rapid traverse: 30,000 mm/min Feedrate: 10,000 mm/min Distance spindle nose to table surface: 100–735 mm Spindle center to column distance: 640 mm Axis motor power (X; Y; Z): 3.0/4.0 kW/HP; 3.0 4.0; 4.0/5.4 Spindle motor (continuous/30 min): 5.5/7.5 kW Spindle speed: 12,000 rpm Spindle taper: ISO 40 ATC type: With exchange arm Tool magazine capacity: 24 positions Maximum tool diameter (adjacent): 80/150 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg Crsdpfx Aaey Nknqe Njb Power requirement: 30 kVA Machine weight: 7,000 kg Machine dimensions: 3,590 x 2,140 x 2,630 mm MACHINE EQUIPMENT 4th axis rotary table (continuous) Screw-type chip conveyor Remote pendant (Remote Flyer) Machine supplied complete with manuals and CE certification All technical specifications are for reference only and may be changed without prior notice. They are not to be considered binding.

Condition: new, Year of construction: 2026, Manual guillotine shears HS-1000 Guillotine, saber shears for sheet metal, soft materials, linoleum and plastic The solid construction of the machine and the use of an exceptionally thin steel blade guarantee high precision in cutting various elements. The machine does not require a lot of force to operate Technical data cutting 1000 mm Csdpjvzqluefx Aa Njrb sheet thickness 1.5 mm dimensions 1365x500x1700mm weight 70 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 71.28, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 750 mm, CNC machining center Credpeyxmiijfx Aa Nsb

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. Cedpsy I Ak Uefx Aa Njrb The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Cjdpfxswcb Nre Aa Norb Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit