Two Shaft Shredder

KAINZ KS 1000/2

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Nodpfx Aleft U Saehjwh Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: AK26-015, number of ink cartridges: 8, total length: 4,400 mm, total width: 4,400 mm, total height: 1,820 mm, input voltage: 380 V, overall weight: 4,400 kg, product height (max.): 50 mm, Equipment: cooling unit, documentation/manual, Hybrid UV Inkjet printer for sheet and roll materials. Print resolution: 1200 dpi Modulation of the print droplet: Binary, Gray balance Nodsqlahtjpfx Alhswh Number of colors: 6 colors - CMYK Lc Lm Additional white color that is printed before colored colors (underprint) Drying of all colors using LED lamps Dot size on the printhead: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum width of printing on plate materials: 3,500 mm The possibility of simultaneous printing of two plates next to each other Display table for receiving plate materials with a length of 2,200 mm Maximum print width on roll material: one roll 3,470 mm, two rolls next to each other 1,625 mm Maximum weight of material in a roll: 350 kg Maximum roll diameter: 350 mm Supports for two rolls of length 3,470 mm on the input and display

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Nedpfxoyrfgrs Alhswh Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition Nodpfx Asx Tp U Relhjwh - available immediately

Condition: new, Year of construction: 2026, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. Nwjdpfxexlzkrs Alhjh VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Nwedpjwp E E Dsfx Alhjh Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Nsdpfxsytdkfo Alhowh Service newly performed. New paintwork. Immediately ready for use.

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Nwodpow I R Rnsfx Alheh Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Nwodsyddyzepfx Alhoh

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Nwodpei Igdfefx Alhjh Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator