Used Kraussmaffei Injection Molding Machine for sale (65,485)

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Gbodpfxszrw Ads Ahler Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Gbodpfozrwy Aex Ahljr Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Gbsdpfx Ahjzqbk Njljr

Condition: used, Wittmann Battenfeld 3 units of Vertical V 800/315 injection molding machines Gbodpfx Ahozpwrgelor for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Theoretical displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar spacing: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Dismantling and collection must be carried out by the buyer. Scope of delivery: (See image) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Gbjdpfxezrgfhs Ahlsr Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, Fully electric injection molding machine with Multilift, conveyor belt, and protective fence from current production. New price: €168,000 Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year of manufacture: 2022 Machine No.: 259303 Operating hours: 12,182 h Injection unit Injection unit/screw 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating capacity: 9.7 kW Heating zones: 5 Nozzle stroke: 300 mm 50 kN Injection pressure: 2000 bar Clamping unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum mold installation height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Highly wear-resistant cylinder liner • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Nozzle travel movement, servo-controlled • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate locking • Protective device open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles. Optimization/operator assistance: for adapting the machine to individual operational requirements • Quality assurance: • Expands the standard quality monitoring and documentation: • Possibilities for process analysis Gsdpfx Ajzn Av Ijhljbr • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting • Freely configurable page for start parameters (set cycles with other parameters instead of production parameters) • Socket combination 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW each / 230V • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment and C-axis (tilting axis), pneumatically operated X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic tilting axis 0-90° 13 Nm / weight 1.2 kg with special equipment 4 x vacuum circuits X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis with end position monitoring Overhead height increased by 200 mm • Conveyor belt • Protective fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Gbsdpjy Iwlaefx Ahlor Machine is immediately available!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Gedpfszncmtox Ahlsbr Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Gbodpjzncmaofx Ahlor MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Gbedszrngyjpfx Ahler Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Gbsdpex Tbfuofx Ahlsr Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysu Roboter Hersteller: WITTMANN 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Gbjdpfxjzqdibo Ahlor Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Gbsdpezqdagsfx Ahlsr Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Gbsdjzl Tc Tepfx Ahlor Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Gsdpfx Ahszl T Sneljbr Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Gsdpjzl Svrofx Ahlsbr Typ: KM500-4300CX Baujahr: 2010 Schließkraft: 500 Tonnen Holmabstand 900 x 900 mm Schnecken DN: 90 mm Max. Hubvolumen: 2.290 cm³ Spritzteilgewicht: 1.777 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Gsdpfx Ajzl Sfmjhlobr Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Gjdpfx Aezmxdljhlobr Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. In excellent condition! Gedpfxozrvhlj Ahlobr Price for both machines: only €16,000.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Godpfoznll Sox Ahljbr

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 1,82,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 1,16,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Gbodpjznlhmsfx Ahljr

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull Gbodpjxzix Asfx Ahler • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 3,50,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 2,04,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Gsdpfjznbqqex Ahljbr

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Gedpsxw Upfsfx Ahlsbr Maximum opening: 750 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Gbsdpfxoxak Uce Ahljr Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m