Used Leica Leica Hm-Lux Microscope for sale (2,128)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. Ljdpfx Abezubtljyeag The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, Year of construction: 2015, operating hours: 967 h, load capacity: 2,000 kg, fuel type: diesel, power: 19 kW (25.83 HP), gearing type: other, overall weight: 4,034 kg, empty load weight: 2,150 kg, mileage: 969 km, first registration: 04/2015, maximum load weight: 1,884 kg, driver cabin: other, Equipment: front guard, sideshift, * German equipment * First owner * Condition: see photos * 969 operating hours * Duplex mast * Lifting height: 3,660 mm * Fork length: 1,800 mm * Side shifter * Load center: 600 mm * 3-cylinder Kubota diesel engine * 19 kW, 1,127 cc * Rotating beacon * Work lights, front and rear Laedpfxoz D Ilws Abysg * Road lighting * Roof protection / protective roof * Gross vehicle weight (GVW): 4,034 kg * Unladen weight: 2,150 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV certificate, a new safety report (SP), or a new accident prevention regulation (UVV). You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods, so that no false assumptions arise regarding the condition and suitability for the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2017, 1 used CNC bandsaw machine Lajdpfxsz A A Iqj Abyeg Manufacturer: Metallkraft Type: HMBS 400 CNC Year of manufacture: 2017 Serial number: 4101602005F Design: Fully automatic 2-column horizontal bandsaw Control system: Mitsubishi Electric GOT 2000 Cutting range (round), 0° to 400 mm Cutting range (square), 0° to 400 × 400 mm Bandsaw blade: 4,520 × 34 × 1.1 mm Bandsaw blade speed: 20–100 m/min, continuously variable Drive power: 3.0 kW / 400 V Material feed up to 490 mm per feed Max. feed length: 9,999 mm Table height: 800 mm Weight: approx. 1,300 kg Dimensions: approx. 2,600 × 2,150 × 2,050 mm Approx. 3 m roller conveyor, chip conveyor

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. Lsdpfxex Sygho Abyeag It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !! Ljdpjw R T Twofx Abyoag

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER Laodpfxjww H Ens Abyog 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Lodpfx Abozvm Ansyeag Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: used, This listing is for a 1 of 2 Vickers Instruments Vickers Instruments Binocular Microscope. Laodjxxzmyepfx Abyjg The unit is in full working condition and is ready for immediate release.

Condition: good (used), Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2", R3/4", R1", R1 1/4", 1 ratchet lever -Transport case -Dimensions case: 360/340/H100 mm -Weight: 5.4 kg Laodpfjvmhfpsx Abyog

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Ljdpfxovvku Ee Abyoag

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials Laodpfx Aoytrufebyeg The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t Ljdpjr Eth Dofx Abyoag coil internal dia. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Laodpfxsw Ah Axe Abysg Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. Ledjiz Tzxjpfx Abysag 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Lsdpfx Aoridqxjbyoag Width: 1400 mm, depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg.

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Lodpfx Aet T Uavebysag

Condition: good (used), Measuring microscope, universal workshop measuring microscope, microscope -Manufacturer: Leitz Wetzlar, universal workshop measuring microscope -Reading accuracy: see photos Ledpfx Abjh Tadpjyjag -Dimension assembled: 255/245/H470 mm -Quantity: 1 pieces available -Price per piece -Dimensions transport box: 710/230/H155 mm -Total weight: 35.4 kg/pc.

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). Ljdpfx Aeztw Upsbyeag - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 60.04.102.21, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 40 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, actuation type: electric, total length of planing tables: 2,250 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 1,100 kg, Equipment: CE marking, documentation/manual, Thickness planer Exact 63 with: four-spindle lift table, feed roller, outfeed table, steplessly adjustable feed, Silent Power planer shaft with HM reversible knives, max. pass-through height 300 mm, max. pass-through width 630 mm. Max. material removal per pass: 10 mm. Estimated operating hours: 200. Single ownership. Lsdpfxsym Sfqo Abysag

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears Ledpfxjz A Tgqo Abyoag >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: excellent (used), Year of construction: 2014, You are bidding on: a branded machine - folding press - from a highly reputable and well-known manufacturer - HM. Device features: - HM folding press - Rail bends cleanly – test possible on site - Angle display - Bending length: 1270 mm - Sheet thickness: up to 3 mm (steel sheet, aluminum, zinc, etc.) - 4-segment rail, see pictures (extension rail also segmented) - Foot-operated closer - Partially electric: bends electrically, opening and closing mechanically by foot - Additional: previous owner installed a light with bracket and rear sheet tray (both removable) - Professionally welded, mobile machine frame - Original price over €13,000 Shear HT 100 and other models available optionally. Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steelworking, including folding presses, guillotine shears, drills, slip rollers, slitting and profiling machines, accessory parts (beading units, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with stated VAT. Free loading possible – weight approx. 600 kg. Inspection and test runs are possible and encouraged by prior telephone arrangement. Ljdpfx Abox Hixpsyjag Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should take place within 10 days following the end of the auction. Location: 97261 Article number: Folding Press HM 251202.

Condition: used, 2 Carl Zeiss microscopes with accessories Lajdpfxeurlprj Abyjg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ Ljdpoy Tn Ensfx Abysag • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann W818 (Z=2500mm)

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: KS 842, KOLBUS KS – Machine for Cutting Bookbinding Materials Manufacturer: KOLBUS (Germany) Model: KS (Cardboard and Narrow Slitting Machine) Year of manufacture: 1975 Purpose: Precision longitudinal and cross-cutting of covering materials from rolls or sheets (calico, bookbinding cloth, imitation leather, Balacron, gauze, PVC). Technical specifications: • Maximum roll width: 1,400 mm • Cutting width (longitudinal cut): minimum 50 mm to maximum 1,400 mm • Cutting length (cross-cut): minimum 10 mm to maximum 1,050 mm • Cutting system: Shaft with circular knives for longitudinal cutting + guillotine knife for cross-cutting • Speed: 14–36 strokes (cuts) per minute Lasdpfx Absz A A Hgoyeg The machine is well maintained, fully functional, and ready for operation. Price: €4,500.00

Condition: used, Manufacturer: Hensoldt Wetzlar Ledpfx Aboy Tbwwsyjag Centering microscope with tightening thread, e.g. for capping machines.