Measuring microscope

Leitz 851735

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Chedpfx Ajhhm Edjddjf Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch Codpfx Aegllxgsddohf - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: excellent (used), MMM Incubator Climacell Here we offer a MMM Incubator Climacell. MMM Incubator Climacell incubator Volume 707 liters Working temperature from 0.0°C to 99.9°C (no humidity) Internal dimensions: Depth: 50 cm Width: 94 cm Height: 140 cm from 10°C to 90.0°C (with humidity) Relative humidity 10-95 Temperature range: 99°C Connection: 230V 50/60Hz Power consumption 3440W Cedpfod Hyh Tex Addjhf Type: Climacell 707 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Technical characteristics: LENGTH: 3,600 mms Cjds Dvllepfx Addehf

Condition: good (used), functionality: fully functional, POWRDRENCH 2000 ID.NO. 2773 Powrdrench mod 2000 smoke shower for standard smoke carts very nice condition and little use since new! Chodpfxjua Ebce Addef Dimensions 230 x 200 cm Height 255 cm.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Chjdpfx Aomgc I Neddjf Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Chsdpfeh Ha Ipjx Addof Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Csdpfx Adsd Tx Ahjdshf

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: TNC 7, _____ Description: Cedpfx Aoxzxaceddshf Year of manuf. : 2024 Control : Heidenhain TNC 7 Speed : 16000 rpm Movement X/Y/Z : 2100/2100/1250 mm Tool holder : HSK 100 In General: Year of manufacture:2024 Control:Heidenhain TNC 7 Travel distances X/Y/Z:2,100/2,100/1,250 mm Tool holder:HSK 100 Milling head: Technology:Universal milling head with controlled B-axis Spindle:Motor spindle Speed:16,000 rpm Max. power:52 kW Max. torque:404 Nm Tool holder:HSK 100 Media feed:Blowing air + cooling lubricant NC rotary table: C-axis:360° Clamping surface:1,700 mm Tool magazin: Technology:Wheel magazine Tool changer:Double gripper Number of stations:123 Cone cleaning:Rotating brushes Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Coolant temperature control:Immersion recooler Position measuring systems:Direct in all axes Accuracy package:µ-Precision package Workpiece measurement:Renishaw OMP 600 Tool measurement:BLUM laser Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Machine protection:MPC (quick shutdown) Digital manufacturing:IOT Connector, MDC, NETservice CAD import:DXF, STEP, and IGES formats Emulsion mist separator:Mechanical Setup mode:Electronic handwheel

Condition: used, Year of construction: 1967, functionality: fully functional, table width: 1,000 mm, table length: 810 mm, overall weight: 11,000 kg, workpiece weight (max.): 1,200 kg, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, spindle diameter: 120 mm, space requirement height: 2,475 mm, space requirement length: 3,970 mm, space requirement width: 2,230 mm, Equipment: rotational speed infinitely variable, - Maximum power consumption: 14 kW - Rated spindle power: 8 kW - Spindle drive power: 8 HP - Control voltage: 110 V - Table rotation continuously 360 degrees in both directions - Transverse table stroke (X-axis): 760 (+20) mm - Longitudinal table stroke (Z-axis): 760 (+20) mm - Vertical headstock stroke (Y-axis), min. and max. height of the spindle axis above the table: 50-710 (+20) mm - Rapid traverse: 2 m/min - 9 adjustable feed rates: 0.04 - 0.6 mm/rev - Hydraulically continuously adjustable working feed rates in manual mode (strokes): 0 - 3000 mm/min Chsdpowdwqnjfx Addef - Optical reading accuracy: linear axes 0.001 mm / manual rotary axis 1 sec. arc - Positioning referenced Accuracy on the built-in scales: ± 0.0015 mm / ± 2 sec. arc - With central lubrication of the guideways - Internal spindle: ISA No. 40 steep taper with Dixi bayonet, diameter 75 mm - Extras: Various tool holders, accessories, and operating instructions are included.