Used Mark Mas 7,5Kw for sale (8,276)

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Isdpfx Ajzty Hnedlstl Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, total height: 3,000 mm, total length: 3,700 mm, total width: 2,310 mm, table height: 550 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,400 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Wemas New Machine VZ800 Greenline X-axis travel: 800mm Y-axis travel: 550mm Z-axis travel: 550mm Table surface area: 1000mm x 550mm Itjdpfx Asztzpwsdljl Table load capacity: 600kg SK40 tool holder 30-tool magazine 42m/min rapid traverse rate Siemens 828D Shop Mill Roller linear guide in all axes 6-way guide system in the Z-axis M30 power off Spindle blow-out system Control cabinet cooling Wemas Airshield spindle All information without guarantee Sale only to commercial businesses

Condition: ready for operation (used), functionality: fully functional, operating hours: 3 h, overall weight: 36 kg, Keep your workshop tidy and free of wood dust and shavings with this wall-mountable extraction fan. The Holzmann FAN2200 moves 4,000 m³/h of air through a 2.2 kW 400V three-phase motor and can be wall-mounted to save floor space. It is fully functional and ready for use. Minor cosmetic dents on the top housing and inlet are clearly visible in the photos and do not affect operation. Optionally available with a matching hose, reducers, blast gate, connectors, and clamps for a ready-to-connect 160mm ducting system. Only one unit is available – once it’s sold, it’s gone. The Ø160mm pipe/hose accessories may be sold separately. Best for: workshop extraction of wood dust and shavings, moving dust-laden air over short duct runs in areas with limited floor space. Not suitable for: explosive dust atmospheres requiring ATEX certification (unless independently verified), wet material, or long duct runs without a properly sized system. What the specifications mean in practice: • 4,000 m³/h extraction capacity – moves a high volume of dust-laden air, sufficient for several machines. • 1,900 Pa negative pressure – pulls through hoses and bends, not just short, straight pipes. • 200mm inlet / 180mm outlet – connects to standard workshop ducting, reducible to 160mm with the optional kit. • Wall-mountable, 36 kg – frees up floor space in a small workshop. • 2.2 kW 400V motor, S1 rating – designed for continuous operation, not short bursts. • 85 dB(A) sound power – plan for hearing protection or mount it outside the working area. Optional complete connection package (+CHF 250): 10m PU hose NW160, 2 reducers Ø200/160, 1 blast gate Ø160, 2 hose connectors Ø160, 3 pipe clamps Ø160, 2 hose clamps Ø150-170, all Holzkraft, and all matched to this fan. Iedpfx Adjzx D Dnsletl Technical data: – Model: Holzmann FAN2200_400V – Motor power (S1): 2.2 kW – Voltage: 400V/3-phase/50Hz – Extraction capacity: 4,000 m³/h – Impeller diameter: 330mm – Negative pressure: 1,900 Pa – Sound power: 85 dB(A) – Port: 200mm (in)/180mm (out) – Dimensions: 575x585x705mm – Weight: 36kg net/38kg gross Condition: Used, fully functional. Minor cosmetic dents on the top housing and inlet (present upon arrival) – see photos. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: fully functional and ready for use; dents were present when we purchased it and are shown in the photos, so there will be no surprises upon pickup. A functional test is possible before pickup; photos of the nameplate and a video of it running are available. In-person inspection in Kerns OW by appointment. Why buy now: single used unit available, not stock. The Ø160mm accessory package is a one-time set and may be sold separately to another buyer. First-buyer bonus: free functional test run before pickup, plus the Ø160mm blast gate and hose clamps from the accessory set, at no extra cost. Valid until September 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, functionality: fully functional, Printer and multifunction device. Itodpfxszx R Dbe Adlol

Condition: excellent (used), Walter+Bai LFV100-HH Servo-hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Ijdpfxozlz Rxj Adletl Year of Manufacture: 2019 Machine Type: Servo-hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including the PAC-40 hydraulic unit, PCS8000 digital controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial manufacturing. The original Walter+Bai testing software, the associated software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K29788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control System: Walter+Bai PCS8000 Digital Controller Digital Testing Machine Control System Original Walter+Bai Testing Software Available Original Software Dongle Available Industrial PC Included in Scope of Delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic Hydraulic Unit Water-cooled Version Designed for Continuous Operation PCS8000 Digital Controller Mounted Dimensions: Testing Machine (W × D × H): approx. 1,200 × 1,245 × 3,378 mm Hydraulic Unit PAC-40 (W × D × H): approx. 800 × 1,250 × 1,650 mm Weight: Testing Machine: approx. 2,500 kg Hydraulic Unit PAC-40: approx. 980 kg Clamping System: 2 × Mechanical Wedge Grips Walter+Bai WGR-100-M Several Sets of Gripping Jaws Clamping and Mounting Accessories as Shown in Pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Several Sets of Gripping Jaws Handheld Control Unit Separate Control Unit with Emergency Stop Testing and Mounting Accessories as Shown in Pictures Condition: Used Year of Manufacture 2019 Optical Condition as Shown in Pictures Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Sets of Gripping Jaws Handheld Control Unit Control Unit Other Accessories as Shown in Pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Itsdpfxozw T Due Adlol Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Iedezr Ha Ejpfx Adlotl

Condition: new, Year of construction: 2026, machine/vehicle number: YS501X-1, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Isdpfozr Hlhox Adlotl Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Itodozr Hnpopfx Adlol Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS_2, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Itodpfx Aezr Hr Ujdljl Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1A_1, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Isdpfozr H Hlex Adlotl Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Iedpfszr Nmbox Adlstl Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. Itsdpszhux Iofx Adlsl The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Condition: good (used), Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Overall dimensions mm 560 x 680 x 1000 h Weight kg 25 Isdjzipx Eopfx Adlotl

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, Shoe soles are only roughly cleaned w􀇕th a dry curly hyg􀇕ene mop. For hand d􀇕s􀇕nfect􀇕on, two hands are s􀇕multaneously 􀇕nserted 􀇕nto two separate chambers on the front of the mach􀇕ne, and the solut􀇕on 􀇕s sprayed as soon as the hands are detected by the sensors. There are Red/Green LED warn􀇕ng l􀇕ghts that 􀇕nd􀇕cate that the process has been completed and completed. After the person's hand d􀇕s􀇕nfect􀇕on process, he/she 􀇕s g􀇕ven perm􀇕ss􀇕on to pass through the turnst􀇕le. Dry curly mop for clean􀇕ng shoe soles and d􀇕s􀇕nfect􀇕on of hands are carr􀇕ed out together. IT IS MANUFACTURED FROM 304 CR STAINLESS MATERIAL. A HYGIENE MAT IS AVAILABLE. Itjdpfjzg A Emox Adljl The Hyg􀇕ene Mat can be eas􀇕ly replaced 􀇕f des􀇕red. It prov􀇕des hyg􀇕ene qu􀇕ckly and e􀇖􀇕c􀇕ently 􀇕n any locat􀇕on needed 􀇕n the fac􀇕l􀇕ty. It 􀇕s eas􀇕ly portable and can be 􀇕nstalled anywhere. A mandatory hand d􀇕s􀇕nfect􀇕on 􀇕s prov􀇕ded for two hands s􀇕multaneously, and the hand d􀇕s􀇕nfect􀇕on t􀇕me can be adjusted. It does not allow one-handed passage. There 􀇕s an adjustable turnst􀇕le lock accord􀇕ng to ex􀇕t d􀇕rect􀇕on and preference, and the turnst􀇕le durat􀇕on can be adjusted. Approx􀇕mate d􀇕mens􀇕ons 86.5 cm (length) x 60 CM (w􀇕dth) x140 CM (he􀇕ght) 304 CR Sta􀇕nless Steel ra􀇕l􀇕ng 􀇕s ava􀇕lable. FREE PASSAGE WHEN THERE IS NO ELECTRICITY. There are he􀇕ght adjustable legs. There 􀇕s a sta􀇕nless carry􀇕ng plate for d􀇕s􀇕nfectant can􀇕sters on one s􀇕de of the dev􀇕ce. IT OPERATES WITH 220 V ELECTRICITY

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, input voltage: 220 V, laser power: 6 W, total width: 320 mm, total height: 655 mm, total length: 515 mm, overall weight: 32 kg, space requirement width: 990 mm, laser wavelength: 355 nm, We offer this as new, 1h used ComMarker Omni X UV Laser Engraver with Rotary Bundle. Machine is in perfect condition, working without problems. Purchased but never needed, so it remains assembled in as new condition. Laser comes with rotary attachment for engraving rings or glass, etc. and Cutting Panel. Manufacturer: Commaker Machine Model: Omni X UV Laser Engraver with rotary bundle Machine Power: 220 V, 6W Machine Size: About 515mm*320mm*655mm Package Weight: 32 kg Working area: 5.9“ × 5.9” (150mm × 150mm) (6W) Max. Processing Height: 235mm Simple operation panel, the working temperature can be adjusted according to operation need. Improves working efficiency. Itodpfx Adjzf Ipujlsl Includes two brackets. These are more convenient to place and take out bottles/containers. And the circulating water system can improves the working efficiency, as seen in pictures. Made of high quality stainless steel, machine can be cleaned fast and more effectively.

Condition: not inspected (used), Two pad printing machines with extensive accessories for sale We currently have two pad printing machines for sale, all in perfect working order. The machines only need to be adjusted to your individual printing templates. The package also includes: at least 200 new, unused printing pads new, etched printing plates (unused) All machines are in perfect technical condition and ready for immediate use once they have been set up for the respective templates. Ideally, I would like to sell everything together as a complete package. Itsdpoyrut Usfx Adljl Regarding the value of the printing pads: A single printing pad costs approximately €35–45, depending on the design, so the stock of pads alone represents a value of several hundred euros. If you are interested or have any questions, please do not hesitate to contact me. I also have videos of all the machines! We would like €1,250 per machine.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Itsdpfx Aozttnfsdlel Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Itjdpfx Aezwhaqsdljl Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Product preparation equipment Dosers Can sealing machines Inspection systems Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Ijdpszw A Shofx Adlstl Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: Ijdpfozwdv Uex Adletl The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: used, Year of construction: 1995, operating hours: 4,423 h, functionality: fully functional, machine/vehicle number: 435, Lindner RZ S1000 – Industrial Shredder – 32 Blades – Ø 20 mm Screen Lindner RZ S1000, manufactured by Maschinenfabrik Lindner, machine number 435, year of manufacture 1995. For sale is a used Lindner RZ S1000 industrial shredder. The machine comes from industrial use and is being sold due to a business closure or restructuring. The machine is equipped with a powerful 18.5 kW three-phase motor and a hydraulic unit. According to the technical documentation, the rotor has 32 blades, and the machine has a screen with 20 mm openings. Technical Data Itedpozux Hpofx Adljl * Manufacturer: Maschinenfabrik Lindner * Machine Type: RZ S1000 * Machine Number: 435 * Year of Manufacture: 1995 * Drive: Three-phase motor * Motor Power: 18.5 kW * Drive Motor Speed: 1,000 rpm * Motor Frame Size: 200 L * Voltage: 400 V * Frequency: 50 Hz * Design: B3 * Hydraulic Unit: Type S1000 * Hydraulic Output: 5 l/min * Oil Tank: 15 l, Castrol Vario HDX, factory fill * Operating Pressure: 90 bar * Hydraulic Drive Motor: 0.75 kW * Speed: 1,380 rpm * Voltage Hydraulic Motor: 220/400 V * Design: B5 * Hydraulic Cylinder: 50/30 x 300 mm * Cylinder/Rod Diameter: 50/30 mm * Stroke: 300 mm * V-Belt Ratio: i = 3.6 * Roller Chain: i = 4 * Rotor Speed: 67 rpm * Number of Blades: 32 * Blade Shape: square * Screen: Hole diameter Ø 20 mm * Material Conveying: TKF30 * Paint: RAL 7035 / RAL 5002 * Machine Weight: approx. 2.5 t * Operating Hours according to Counter: approx. 423 h Condition The machine is in used condition, consistent with its age. The technical data was taken from the available original documents. An on-site inspection is possible by arrangement and is highly recommended. Sold as is. If interested, further photos, technical documents, and information about the machine can be provided. Location: by arrangement Price: on request / negotiable

Condition: good (used), Year of construction: 2003, Technical condition: good Visual appearance: good Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Itsdjzuclpopfx Adljl Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: ready for operation (used), Year of construction: 2006, input voltage: 400 V, number of axes: 4, controller manufacturer: Masterwood, overall weight: 3,800 kg, Masterwood Projekt 415 4 axis CNC machine Working area 3200 x 1335 4 working fields ISO30 10.5 HP spindle C-axis Toolchanger 12 positions 6 supports Schmalz double channel Vacuumcups 17" screen Drillinghead 16 spindels (horizontal and vertical) Machine in working condition Pneumatic lifters Vacuümpump Becker Fence left, right and back Safety mats in the front (not checked) WIndows control Iodpfx Adszv S Sueletl Masterwork CAD-CAM system Available from 31 of August 2026 Price on request

Condition: new, Year of construction: 2026, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Itsdpfxezuvaye Adlsl Self-collection is possible. Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR