Used Material Separator for sale (21,509)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght Laedpjzvq Rcefx Apdog • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Ljdpezp Edwefx Apdsag Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: good (used), Technical data for the pallet racking system: Racking system: Arestant Type: AS Technical data for installation: Number of racking bays: 01 unit Length per racking bay: 19,575 mm Number of bays per racking bay: 07 units Number of levels including base level: 04 units Technical data for capacity: Pallet spaces per bay: 12 units Pallet spaces per racking bay: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Pitch hole: 50/50 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Agraffe: 4 HK (hooks) Clear span: 2,705 mm Max. load per pair of beams: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Ledpfxez Azyus Apdeag Approved for: cracked concrete 16x Leveling shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Lsdpfx Apjz A Dzfsdsag Racking system: Arestant Type: AS Technical data for the installation: Number of racking rows: 01 unit Length per racking row: 19,575 mm Number of bays per racking row: 07 units Number of levels including base level: 04 units Technical data for the volume: Pallet spaces per bay: 12 units Pallet spaces per racking row: 84 units Total pallet spaces: 84 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 400 kg Included in the scope of delivery: 08x Pallet racking uprights, used Material color: blue Frame profile: 8808 Profile dimensions: 80 x 80 x 1.50 mm Grid hole spacing: 50/50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) Height: 5,000 mm Depth: 1,100 mm 42x Pallet racking beams, used Material color: orange Box profile: 80 x 40 mm Hook: 4 HK Clear width: 2,705 mm Design: Head beam Max. load per beam pair: 1,200 kg, with evenly distributed load. (Observe bay load) 84x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 32x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge Laedpfx Apsz Ar D Rjdsg 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Ledpfx Aevmfawopdjag Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. Ljdpfx Apozwv Ntedsag The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.

Condition: used, Industrial vibratory classifying screen, vibrating screen, two-deck screening machine, Binder+Co WS 1300, Used Machine Manufacturer / Brand: Binder+Co AG (Gleisdorf, Austria) Type: WS 1300 Serial No.: S 2035 Order No.: 20 235/20 Year of Manufacture: 1992 Design: Robust two-deck steel construction with upper dust protection cover featuring a dust extraction connection. Drive: Cardan shaft drive / power transmission between the drive motor and the eccentric shaft. Accessories: 4 heavy-duty vibration-damping rubber mounts for the spring/suspension mounting points. SCREEN DECKS: Upper deck: Bar screen with approx. 12 mm bar spacing, suitable for coarse screening. Lower deck: Square-mesh screen with approx. 12 × 12 mm aperture size, suitable for fine screening. APPLICATION: Lajdpfx Aozxd Tcspdog Ideally suited for the accurate separation and classification of gravel, sand, stone, coal, recycled materials, scrap metal, and other bulk industrial materials according to particle size. OVERALL DIMENSIONS: Width: 3300 mm Depth: 2130 mm Height: 1440 mm Weight: 2300 kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, control type: manual, actuation type: hydraulic, For sale: Davi Promau MCB 3028 plate rolling machine (mechanical/hydraulic construction with hydraulic drive), engineered for efficient and precise bending and rolling of metal sheets. The machine provides a maximum working length of 3000 mm and is capable of processing material thicknesses up to 13 mm (depending on material quality and specific application). Lodsykmzbspfx Apdsag The machine features heavy-duty, large-diameter rolls—including a top roll with a diameter of 280 mm—offering enhanced stability and repeatability, which is especially beneficial for demanding jobs. Approximate overall dimensions are 4800 × 1900 × 1900 mm, and the total weight is about 8800 kg. For user control, the unit is equipped with a Davi Smart operator panel (mounted on the left side) with intuitive levers and push-buttons for easy operation. A separate electrical/control cabinet is included. The central lubrication system ensures reliable operation and reduces the need for daily maintenance. Safety features are practical and robust: the machine is equipped with a CE-compliant safety cable around the working area, and several warning labels clearly mark pinch and hand hazard zones. Hydraulic hoses and fittings are easily accessible at the front, underpinning the hydraulic drive system design. Cosmetically, the roller shows typical signs of use, such as minor surface wear and paint scuffs, but there is no evidence of significant damage. Overall, this sturdy and comprehensively outfitted Davi Promau MCB 3028 is ideally suited for industrial sheet metal forming tasks where capacity, accuracy, and operator safety are essential.

Condition: ready for operation (used), SALES OFFER FOR A COMPACT, ROBOTIZED SANDBLASTING BOOTH KUKA robot configuration: KUKA Robots KR 10 R1420 Configuration/Config.: Basic CYBERTECH NANO version: KR 10 R1420 CYBERTECH NANO A1-A3 cable set: Robot cable set A1-3 KR10 Mechanics color RAL: 260580 KUKA Orange Base color: According to layout/parts list Sign language: See layout/parts list CYBERTECH NANO warning signs: KR CYBERTECH NANO warning signs High-gloss finish: No high-gloss finish Trade fair finish: No trade fair quality Measurement type: Not position-accurate Material number: 10022523 CN/HS Code: 84795000 Robot is lightly used Laodpfszhrq Uex Apdsg Sandblasting booth: 1800 x 1700 h 2300 The booth frame is made of thick-walled 80/80/3 steel profile. The walls are made of chipboard. The robot is mounted to the ceiling of the booth. A 200 mm diameter dust extraction pipe outlet is located on the outside of the booth. The robot is protected from dust by a cover made of special fabric. The abrasive material is in a closed circuit. The abrasive material is drawn from a hopper located in the lower part of the booth. The side wall has a door. The front wall has a rotating table – while the robot is sandblasting a particular item inside, the operator places the next item to be sandblasted outside the booth. There is no need to open the door to exchange the workpiece. Both the door and the rotating table are automatically locked when the robot is sandblasting. The control cabinet is located separately, away from the booth. The booth can be easily enlarged or adapted for spray painting. Working space: width 1400, height 1200, depth 400. Minimum price: 17,000 EUR net

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev Laodpjx Hdq Tefx Apdsg - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Lajdpfoz Ahurex Apdog Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Condition: used, functionality: unexamined, input voltage: 380 V, The machine (or at least a part of it) is an old coffee pad recycling (CPR-30) machine (see appendix). This shredder and blade assembly was used to tear open paper coffee pads and then separate the pad from the coffee using a vibrating screen located underneath the machine. Perhaps this machine is also suitable for other materials. Lasdpfezvfxnox Apdsg Price is per unit.

Condition: ready for operation (used), functionality: fully functional, pressing force: 500 t, table length: 7,000 mm, sheet thickness (max.): 10 mm, We are offering for sale two edge bending presses from the renowned Lotze brand, designed for demanding bending tasks. The set includes a press with a bending length of 7000 mm and a pressure of 500 tons, and another with a bending length of 6000 mm and a pressure of 400 tons. After proper configuration, the machines can operate in tandem, which increases efficiency for larger projects. The set includes punches and dies, and the maximum thickness of the material to be bent at full length is 10 mm, while maintaining an appropriate bending radius. Ledoznwt Uepfx Apdsag It is possible to purchase one of the two presses separately: price PLN 380,000. This is an excellent offer for companies looking for reliable, high-power presses with a wide range of applications.

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): Lodszp Nv Dopfx Apdjag approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 5 Technical specifications for volume: Pallet spaces per bay: 18 Number of pallet spaces per row: 90 Total number of pallet spaces: 90 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm 50x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA116x40|SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 100x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are Laodpfx Aewbqh Uepdsg installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Dexion Type: P 90 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 36,910 mm Number of bays per rack row: 9 Number of levels plus floor level: 3 The scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 54x pallet rack crossbeams, used Material color: Sendzimir galvanized Box profile: 147 x 50 mm Crossbeam type: SLB 147|18 Clamp: 5 HK Clear width: 3,990 mm Max. load per pair of crossbeams: 3,900 kg, with uniform load. Distributed load 108x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Lsdowigq Ijpfx Apdjag 20x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Lodpfeif Sg Sjx Apdsag Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 17,100 mm Number of fields per rack row: 05 pcs. Number of levels plus floor level: 05 pcs. Technical data for volume: Pallet spaces per field: 24 pcs. Number of pallet spaces per row: 120 pcs. Number of pallet spaces total: 120 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): 430 kg The scope of delivery includes: 06x pallet rack stands, used Material color: blue Stand profile dimensions: 100 x 69 x 2.0 mm Stand type: M-101-P Incl. cross and diagonal struts, Foot plates Field load 13,000 kg at bend height: 1,750 mm Compartment load reduced to 2,600 kg The stands are pre-assembled (screwed framework) 9,500 mm high 1,100 mm deep 50x pallet rack crossbeams, used Material color: orange Box profile: 120 x 50 mm Crossbeam type: TB-S 120 Clear width: 3,300 mm Ljdpovz Auhofx Apdsag Max. load per pair of crossbeams 1,750 kg at uniform distributed load 100x integrated locking pin, new To secure the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 2 x 30 kW Ljdezz R D Tspfx Apdoag • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Laedpoyay D Iofx Apdog Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Ljdpfxszhvage Apdsag Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Lsdohh A Iyepfx Apdeag Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Ledjzww Aujpfx Apdeag Round stock 90°: 350 mm Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring

Condition: used, clear span: 3,250 mm, total length: 39,539 mm, load per truss pair (max.): 2,550 kg, shelf height: 4,130 mm, Technical data for the pallet racking system: Racking system: Redirack Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 39,539 mm Number of bays per racking row: 12, each 3,205 mm Number of levels plus base level: 2 Included in the scope of supply: 13 x Pallet racking uprights, used Material color: light blue Laodpszulgijfx Apdsg Frame profile: S Profile dimensions: C83x50x15x1.75 mm Including cross and diagonal braces Base plates The uprights are pre-assembled (welded framework) 4,130 mm high 1,100 mm deep 48 x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Clear span: 3,205 mm Maximum load per pair of beams: 2,550 kg, with evenly distributed load 96 x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal members against accidental lifting out 52 x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 26 x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 1 x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.