Used Mettler Toledo Load Cell for sale (30,759)

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Kjdpozxhmtofx Ak Uenb Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 - transfer possible after coordination with the manufacturer | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Stroke monitoring ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records ✓ Completely automated manufacturing cell The system is designed for the automated machining of round material. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical, low-manned operation. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • WRB roller conveyor conveying length 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Stroke monitoring • Automatic door drive • Robot interface Knjdpozhltcefx Ak Ujb Documentation and condition The system is in like-new and fully functional condition. • complete documentation available • ongoing maintenance including records • manufacturer's warranty until 03/26/2027, transferable after coordination with the manufacturer • short-term availability The system can be inspected while powered on. Extensive accessories available (chuck jaws, gripper jaws, tool holders, driven tools, etc.) Training and instruction possible. Programming and setup of your components possible. Sale ex works. Buyer organizes disassembly, loading and transport.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. Kodpfxszmyvio Ak Uonb • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 865 h, machine/vehicle number: Z34N07-7037, load capacity: 227 kg, overall weight: 5,300 kg, transport length: 5,800 mm, transport width: 1,480 mm, transport height: 2,030 mm, working height: 6,800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 6,800 mm Knedjzza Tqspfx Ak Usb Platform height: 10,500 mm Platform load capacity: 227 kg MACHINE DETAILS Fuel type: Electric Tires: Solid rubber tires Operating hours: 865 h Dimensions & Weight Transport dimensions (L × W × H): 5,800 × 1,480 × 2,030 mm Unladen weight: 5,300 kg EQUIPMENT User manual CE marking

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive Kodpfx Akszi Da Rs Uenb - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Slugger model with 12 station in special tooling Max. compression force of 120KN 16/20 station available in D tooling with 100KN compression force Square model with GMP construction. Optional electro magnetic clutch for Non pharma / heavy duty application ACVFD as an option for the main motor. High torque motor for slugging application. Ideal for Slugging/Effervescent tablets/Veterinary/Non pharma applications. Load cell for compression force monitoring available as an option. Knedpferrgtrjx Ak Usb 38mm diameter round tablet compressed with ease.

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Kjdpjw Nanrefx Ak Uenb Year: 2013 (bulk buying discounts available) Condition: Used Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.

Year of construction: 2022, condition: new, functionality: fully functional, Automatic press loading – double infeed unit + 5-axis manipulator Complete automation solution for the automatic feeding, loading, unloading, and transfer of sheet metal parts in mechanical and hydraulic presses. Kedpfx Akezx T Dqj Uenb The installation consists of a QF-LJZ600 double infeed/stacking unit in combination with a QF-5045-S6-5 5-axis manipulator with a 5 kg load capacity. This combination is ideally suited for automating existing presses and can be used for, among other things: • Automatic loading of a mechanical or hydraulic press as an alternative to manual loading • Automatic unloading of the pressed product • Unmanned or operator-assisted production • Transferring a product from one press to a subsequent press • Pick & place applications • Turning and repositioning products • Stacking finished products • Automating multiple consecutive pressing operations Double infeed/stacking unit, type QF-LJZ600 Automatic double-station system for feeding individual sheet metal parts/blanks to the manipulator. Key specifications: • Type: QF-LJZ600 / QFLJZ600×600 • Design: double station • Maximum sheet size: approx. 600 × 600 mm • Minimum sheet size: approx. 60 × 100 mm • Stack height: approx. 300–500 mm • Maximum load capacity: approx. 1,600 kg • Positioning accuracy: ± 0.2 mm • Production speed: up to approx. 12 cycles/minute, depending on the product and application • Connection: 380 V, 3-phase, 50/60 Hz • Power: approx. 2 kW • Suitable for, among others, steel, aluminum, and copper The dual-station design allows a new stack of material to be prepared while production continues from the other station, thereby minimizing downtime during material changes. 5-axis press manipulator, type QF-5045-S6-5 Servo-driven manipulator, specially designed for automating pressing operations. Key specifications: • Type: QF-5045-S6-5 • 5 servo-driven axes • Maximum load capacity: 5 kg • Equipped with fixture/vacuum pad/gripper • Programmable movements and trajectories • Absolute servo systems with position memory • Positioning accuracy: approx. ± 0.2 mm • Production speed: up to approx. 15 cycles/minute, depending on the application • Different products and movements can be programmed • Suitable for various gripping systems, including vacuum, pneumatic, and magnetic grippers Application for unmanned press production The installation can be integrated with an existing mechanical or hydraulic press. The sheet metal parts are automatically fed from the stack. The 5-axis manipulator picks up the product, positions it in the press, and can automatically remove the product after the pressing operation. Depending on the application, this can be used to create a fully automated or operator-assisted production cell. A possible configuration is, for example: Sheet stack → double infeed unit → manipulator → press → finished product Transfer from press to press Another interesting application is automating a production process with two or more existing presses. The manipulator can remove a product after the first pressing operation and automatically position it in a second press. General The installation was newly purchased in 2022 but has not been used. The installation is offered as a combination of an infeed/stacking unit and a 5-axis manipulator.

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle Ksdpfx Ajxzrbajk Usnb ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. Knedpjy Aggpefx Ak Ujb CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air Knodpfx Akozlbqrj Usb - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Knedpjzvq Rcsfx Ak Ujb Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Knjdpfxexzg Nxe Ak Usb Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Year of construction: 2017, condition: excellent (used), Karl Schnell Processed Cheese Blending Line Kodjzxcgbopfx Ak Uonb Capacity: 5,000 kg per hour. Complete Karl Schnell preparation/blending line, ideally suited for the preparation and blending of ingredients prior to the processed cheese melting process. Designed for efficient processing of cheese blocks, butter, powders, and other dry ingredients. The Karl Schnell grinder offers capacities of up to 5,000 kg/h, depending on the product. The line can feed a processed cheese UHT system and/or multiple cookers, making it highly suitable for continuous industrial production. Two heavy-duty ribbon blenders provide efficient and homogeneous mixing of all ingredients. Large buffer tanks ensure controlled product flow. Equipped with heavy-duty Waukesha pumps, load cells, recipe-controlled operation, CIP capability, and an integrated pigging system. Designed for large-scale industrial use, offering high capacity, flexibility, and reliable ingredient preparation. Machinery: - Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics
Diagnosis and functional test of the inputs and outputs Ksdpfjyah R Aox Ak Uenb
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning
Compact filling system
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: used, Year of construction: 2024, battery capacity: 240 Ah, battery voltage: 80 V, total length: 1,200 mm, total width: 800 mm, total height: 600 mm, overall weight: 750 kg, No. 10039 Forklift Battery / Traction Battery EnerSys Hawker Water Less 80V 4 PZM 240 Used, year of construction 2024, as good as new According to our customer / the previous owner, the battery is fully functional and can be viewed on site Lead-acid traction battery Hawker Water Less system Cell design PzM With central water refilling system / hose system Installed in battery tray Suitable for industrial trucks / electric forklifts Nominal voltage 80 V Capacity 240 Ah (C5) Number of cells 40 pcs. Electrolyte volume 96 l Battery dimensions approx. 1023 x 710 x 402 mm LWH Transport dimensions approx. 1200 x 800 x 600 mm LWH Weight approx. 750 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location Knsdpfx Akjz Dvn Te Uob

Condition: used, mileage: 51,595 km, power: 70 kW (95.17 HP), first registration: 08/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 123 Mercedes-Benz Citan 109 CDI EXTRALANG Paint code: * 9147 Arctic white paint color Interior equipment: * Fabric black / anthracite Equipment: * BA2 Brake assist * BB0 Brake system with ABS and ASR * BB3 Electronic Stability Program (ESP®) * C415 * CK1 Paint control 1 * CM1 Side bumper strips * D50 Full-length partition wall * E07 Hill start assist * E33 Battery management * EK2 HERMES communication module, radio * F415 * F88 Flat blade windshield wiper * FE8 Electric front windows * FF5 Storage compartment above windshield * FG1 Armrest with storage compartment * FI1 System frequency radio key 315 MHz * FKA Panel van * FQ3 Glove compartment passenger side closed * FZ1 Central locking with radio remote control * GK6 6-speed manual gearbox * H06 Air conditioning * HF2 Pollen filter * HI2 Climate zone 2 (moderate) * HZ0 Electric auxiliary heater * I1A Without cruise control * I1B Without roof rails * I1C Without ladder flap * I1D Without heated rear window * I1F Without wiper and washer system * I1G Without fog lamps * I1J Without luggage compartment cover * I1K Without passenger compartment roof shelf * I1M Without passenger compartment head restraints * I1N Without rear seat bench * I1P Without floor covering * I1Q Without tire pressure monitoring * I1U Without load protection net * I1V Without thorax sidebags and windowbags * I1W Without seats in row 3 * I1Y Without light and rain sensor * I2C Without storage compartments in the floor * I2F Without bad road design * I2G Without windows SW/LST with power windows * I2I Without heated front seats * I2J Without daytime running lights * I2K Without warm air duct to passenger compartment * I2M Without rear center seat belt * I2N Without navigation system * I2P Without lashing eyes on side wall * I2Q Without roof lining * I2R Without 12V socket in passenger compartment * I2S Black grained exterior mirrors * I2T Without storage compartment in closed sliding door(s) Sliding door(s) * I2U Without right rear window * I2V Without windshield wheel details * I2W Without bodybuilder special module * I2X Without construction site package * I2Y Without child seat attachment * I3A Without fuel filter with water separator * I3B Without rear left window * I3D Without folding table on driver and passenger seat backrest * I3E Without burglar/theft alarm system * I3G Without body builder interface * I3H Without interior mirror * I3I Without brake pad wear indicator * I3L Without trailer coupling * I3M Without fire extinguisher * I3O Without speed limiter * I3U Without load compartment interior light * I3Y Without B-pillar trim * I3Z Without midfield application * I4A Without dust kit * I4B Without increased power radiator Ksdpfx Aeuai Dbok Usnb * I4H Without ECO Mode * I4I Without sliding door rail cover in body color * I4L Without stone guard * I4P Without E-CELL perimeter * I4R Without mirror in front passenger sun visor * I4T Without vehicle version 4 * I4V Without chrome package * I5A Payload standard * I5D Diesel * I5N Left side panel * I5T Plastic underbody protection * I5V Foamed steering wheel * I5X Interior trim base * I6C Instrument cluster language German * I6L Without smoker package * I6R Technical regulations Germany * I7B Environmental conditions Europe 1 * I7F Engine series K9K/OM607 * I7L Lockable fuel filler cap * I7N Exterior mirrors left and right * I7O Grained trim above tail light * I7P Lightly tinted glazing * I7Z Standard refueling * I8B Control models * I8C Without

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head Knjdpfxjwwkx Ej Ak Uob  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: Mev600, Filling and dispensing scale for granules, coffee, pasta, nuts, baked goods, herbs, and all free-flowing products. Filling range: 10 g to 2000 g. • Hopper located on top of the machine, with a volume of 40 liters. • The product is conveyed via a vibrating channel. • Vibrating channel made of stainless steel AISI 304. • Vibrating channel speed is adjustable; faster for coarse weight and slower for fine dispensing. • Electronic load cell on the weighing plate with an electronic weight control system. • Minimum/maximum weight: from 10 grams to 2000 grams (depending on product volume). • Voltage: 220 V, single-phase, 50 Hz. • Air connection: 50 liters/cycle. CONTINUOUS SEALING MACHINE, TYPE MINISEALING (compatible with the filling system). • Horizontal CONTINUOUS THERMO-SEAL MACHINE with an inclined belt, adjustable belt speed, and adjustable temperature for sealing/closing bags. • Equipped with a DATA PRINTER with 2 lines. Kedpfezx Rk Ujx Ak Ujnb • Voltage: 220 V, single-phase, 50 Hz. • Spare parts set included. • MACHINE COMPLIES WITH ALL CEE STANDARDS FOR DEVICES AND SWITCHES. Price (optional): EUR 3,500.00.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,817 h, load capacity: 1,200 kg, lifting height: 4,200 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,850 mm, power: 1.6 kW (2.18 HP), gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 24v 3PzS375, battery capacity: 375 Ah, remaining battery capacity: 71 %, battery voltage: 24 V, battery weight: 300 kg, fork carriage width: 560 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 50 mm, overall weight: 1,133 kg, empty load weight: 860 kg, total height: 1,850 mm, color: yellow, Equipment: pallet forks, Jungheinrich EJC 212 Electric High-Lift Pallet Truck. Load capacity: 1,200 kg Fork length: 1,150 mm (standard) Lifting height: 4,200 mm The machine is in good condition, no pending repairs, hydraulics leak-free. Battery serviced and capacity-tested by professional service. Technical specifications: Manufacturer: Jungheinrich Model: EJC 212 Operating hours: 3,817 Year of manufacture: 2019 Load capacity: 1,200 kg Overall height: 1,850 mm Free lift: yes Fork length: 1,150 mm Lifting height: 4,200 mm Triplex mast Battery: 71% remaining capacity, wet cell battery Kedpfxexztbuo Ak Uonb C5 discharge test: 269 Ah at full load for 3:36 h Approx. 7h operating time Includes document holder and integrated charger A higher-performance battery can be installed at extra cost. Net export possible.

Condition: ready for operation (used), Year of construction: 2012, number of axes: 10, Welding robot manufactured in 2012. This CLOOS C50 welding cell features a QRC 350 robot model and includes a Qineo Pulse 450 welding power source. The system is equipped with a linear track axis configuration, mechanical torch cleaning station, and dual-station components. It also has protective safety enclosure fencing and rotatable workpiece positioners. If you are looking to get high-quality welding capabilities, consider the CLOOS C50 welding cell we have for sale. Contact us for further details. Kodpfx Aszg Ht Iok Ujnb - Robot Model: QRC 350 (girOX QRC 350)- Control Version: QC6- Welding Power Source: Qineo Pulse 450 (CAN)- Power Supply: 400 V / AC, 3-Phase, 50 Hz- Connected Load: 12 kVA (System Sheet specifies 45 kVA max system load capability)- Back-up Fuse Required: 25 A (System Circuitry specifies max 63 A)- Control Cabinet Dimensions: 800 mm x 1900 mm x 600 mm- Control Cabinet Weight: 300 kg- Peripheral Components Included:* Linear track axis configuration* Mechanical torch cleaning station* Dual-station components (Station 1 & Station 2 Manax operating pendants)* Dual safety light curtains (Leuze MLD310 / 0-8 Meter)* Protective safety enclosure fencing with automated swing doors* Rotatable/tiltable workpiece positioners (Positioner 1 Axis 8/9 & Positioner 2 Axis 10/11)* Grounding cable assembly: 95 mm²* Potential equalization wiring: 50 mm²- Pneumatic Requirements: Compressed air supply approx. 6 bar, integrated regulator set to 5.5 bar

Condition: excellent (used), functionality: fully functional, SAFELINE R Series Profile | Metal Detector with Conveyor and Rejection System Manufacturer: Mettler Toledo / Safeline Model / Type: R Series Profile Detection Head: R Series Profile Build Level: H 4.1.1 Serial Number: 96148 Frame/Construction Number: 106482 Power Supply: 100 - 240 V / 380 - 440 V AC, 1/3-phase, 50/60 Hz Rated Power: 100 W – 10 kW Operating Frequency: Multi-frequency (100 kHz / 300 kHz) Overall Dimensions: 1850 x 1000 x 1600 mm Detection Window Aperture: 300 x 140 mm Detector Width: 275 mm Coil Pitch: 100 mm Conveyor: Belt conveyor with modular plastic belt Belt Width: 270 mm Rejection System: Integrated automatic rejection system The SAFELINE R Series Profile industrial metal detector, manufactured by the renowned METTLER TOLEDO, is a reliable solution designed for continuous quality control of products in the food industry (meat, processing, bakery, dairy, and catering). The device is used to automatically detect and remove metallic contaminants (ferrous metals, non-ferrous metals, and stainless steel) from packaged products or products transported in bulk on a conveyor belt. Kodpfxez A H Emj Ak Uonb The heart of the machine is an advanced detection head with multi-frequency technology (100 kHz and 300 kHz), which guarantees high sensitivity and stable operation even with challenging products that have a high "product effect" (e.g., salty, moist products, fresh meat or cheese). Products are moved on a hygienic belt conveyor made of modular plastic, with a width of 270 mm. When foreign objects are detected, the automatic rejection system immediately removes the contaminated product from the line, preventing damage to packaging machines and protecting the finished product from entering the distribution chain.

Condition: used, Year of construction: 2012, Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Knjdpfjlw A Emjx Ak Ueb Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), functionality: fully functional, total width: 28,500 mm, shelf height: 4,500 mm, carrying capacity per cantilever arm: 1,000 kg, distance between stands: 1,500 mm, load capacity per stand: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! The sale includes the entire shelving system. TECHNICAL DETAILS Knedpfx Aezzda Usk Uob Number of uprights: 19 Number of arms: 38 Total load capacity per upright: 2,000 kg Load capacity per arm: 1,000 kg Arm length: 1,250 mm Upright height: 4,500 mm Base length: 1,200 mm Distance between uprights: 1,500 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The forklift truck is in very good technical and visual condition. The tires have been replaced, and a battery service was performed in June 2026. TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Drive: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see attachment of the advertisement) Dimensions & Weight Knedpfxjz Arlbo Ak Ujb Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Own weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of manufacture: 2018) Operator protective roof