Used Meyer Multi-Pallet Handler 2/1 Profile Type for sale (1,16,796)

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 Gedpfxsy Auh Is Ap Djbu * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Gsdpfxorlk Ike Ap Dobu

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,500 kg, Multi-pallet fork ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,500 kg Sideshift Opening range 560-2,760 mm Width 1,980 mm Forks 1,150 mm ID OS1918 Gedpfx Apjyzdcro Dobu

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Gsdpoym U Injfx Ap Djbu Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, Gbjdpfx Astqqqmep Dou tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: used, Year of construction: 2017, load capacity: 3,000 kg, Multi-pallet fork Gbodpfjzc S Ikjx Ap Dju

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece Gsdpfx Aezkfr Djp Dsbu -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: good (used), Year of construction: 2019, 2.87-meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking, type MPB, basic bay with a total length of 2870 mm. The bay has two levels (including a ground-level storage space) with two crossbars (2700 mm). The bay can accommodate 3 Euro pallets side-by-side and 6 pallets (including a ground-level storage space) stacked on top of each other. The bay offers space for 6 Euro pallets. Manufacturer: Jungheinrich Type: MPM Total length: 2870 mm Racking height: 3000 mm Racking depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (including ground-level storage space) Gbjdewyc S Aepfx Ap Dsu Number of bays: 1 Max. load per bay: 3000 kg Max. total bay load: 7100 kg Pallet spaces: 6 Racking according to standard: DIN EN 15512 Upright surface: powder-coated Upright RAL color: RAL 5010 gentian blue Upright type: B’12 Crossbar RAL color: RAL 1007 daffodil yellow Crossbar surface: powder-coated Scope of delivery: 02 x Jungheinrich pallet racking uprights, blue, 3000 x 1100 mm 02 x Jungheinrich pallet racking crossbars, yellow, 2700 x 140 x 50 mm 04 x Locking pins You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Year of construction: 1900, load capacity: 2,500 kg, empty load weight: 1,250 kg, construction height: 1,400 mm, Multi-pallet fork Load center: 1200 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Technical condition: normal Godpfjvybt Tjx Ap Debu Description: The unit will be partially repainted, workshop serviced and UVV-inspected if required. Pricing available upon request.

Condition: excellent (used), PR9000 pallet racking system for 42 Euro pallets This pallet racking system has been tested according to DIN EN 15512 with a maximum load of 2,200 kg per beam level and therefore has a maximum field load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-slip safety device prevents stored goods from sliding off when the racking is arranged in parallel. Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field. High-quality processing of the entire pallet racking system. Plenty of storage space thanks to the 2 levels and 4 bays. Eye-catching blue and orange color scheme for maximum safety. Upright profile: Height: 5500 mm Material: Steel S-355 JR Dimensions: 80 W x 70 D x 1.5 Hole spacing: 50 mm (grid – offset) Surface: Powder-coated blue Profile design: Omega profile Depth: 1100 mm Manufacturing: Cold-rolled profile Field load: 9000 kg Beams: The beams can be individually hung at different heights in a 50 mm grid. Total load capacity per beam level: 1800 mm beam: 2000 kg 2700 mm beam: 3000 kg 3600 mm beam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile design: Rectangular profile Mounting: Hook tabs on each side of the beam for hanging, secured with a locking pin Surface: Powder-coated orange Manufacturing: Bent sheet steel Scope of delivery: 05 x Upright PR9000, 5.5 m high / 110 cm deep, field load: 9,000 kg Godpfx Aev Hp Eqjp Dsbu 12 x Beam PR9000, 3600 mm wide, incl. locking pins, bay load: 2200 kg 04 x Beam PR9000, 1800 mm wide, incl. locking pins, bay load: 2000 kg 06 x Anti-slip safety device PR9000, 3600 mm 02 x Anti-slip safety device PR9000, 1800 mm Year of manufacture: 2020-2022 You can find more new and used items in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 6 kg, For sale is 1x Siemens SINAMICS S120 Single Motor Module with the article number 6SL3120-1TE13-0AD0. Series: SINAMICS S120 Design: Single Motor Module Input: DC 600 V (rated value; DC link 510–720 V) Output: 3 AC 400 V Gbodpfozxn Ukjx Ap Dou Rated output current: 3 A Design: Booksize D-Type Cooling: Internal air cooling Degree of protection: IP20 / UL open type The item comes from stock/spare parts inventory. The optical condition can be seen in the attached images. Further technical documents or detailed images are available upon request. Inspection and collection are possible by arrangement. Shipping is possible at extra cost. Subject to prior sale, errors and changes.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 8,500 kg, permissible axle load (axle 3): 8,500 kg, first registration: 03/2007, total width: 2,550 mm, wheelbase: 6,050 mm, Year of construction: 2007, Axle configuration Gbjdjz Rn Sxopfx Ap Dsu Maximum front axle load: 10,000 kg Rear axle 1: Lift axle; Max. axle load: 8,500 kg Rear axle 2: Max. axle load: 8,500 kg Weights Unladen weight: 9,240 kg Payload: 17,760 kg GVW (Gross Vehicle Weight): 27,000 kg Maintenance, history and condition APK (Technical Inspection): valid until 04/2027 Technical condition: good Optical condition: good Additional information Please contact Maarten Busser or Niels Busser for further information.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Gbsdozwvtxopfx Ap Dou Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Gbedozdq Ttjpfx Ap Dou

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm Gsdpfjz Az A Dsx Ap Debu 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. Gsdpfx Apszy E I De Djbu We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 42 Euro pallets This pallet racking system has been tested according to DIN EN 15512 with a maximum load of 2,200 kg per beam level and therefore has a maximum field load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-collapse safety device prevents stored goods from sliding off when the racking is arranged in parallel. Made of solid, high-quality steel for maximum robustness. Gedjv Hpz Ejpfx Ap Dsbu Easily withstands high loads of up to 9,000 kg per bay High-quality processing of the entire pallet racking system Plenty of storage space, thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5000 mm Material: Steel S-355 JR Dimensions: 80 W x 70 D x 1.5 Hole pitch: 50 mm (grid – staggered) Surface: Powder-coated blue Profile design: Omega profile Depth: 1100 mm Manufacturing: Cold-rolled profile Field load: 9000 kg Beams: The beams can be individually hung at a grid of 50 mm in height. Total load capacity per beam level: 1800 mm beam: 2000 kg 2700 mm beam: 3000 kg 3600 mm beam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile design: Rectangular profile Fastening: Hook tabs on each side of the beam for hanging, secured with a locking pin Surface: Powder-coated orange Manufacturing: Bent steel sheet Scope of delivery: 05 x PR9000 uprights, 5 m high / 110 cm deep, field load: 9,000 kg 12 x PR9000 beams, 3600 cm wide, including locking pins, bay load: 2200 kg 04 x PR9000 beams, 1800 cm wide, including locking pins, bay load: 2000 kg 06 x PR9000 anti-collapse safety device, 3600 mm 02 x PR9000 anti-collapse safety device, 1800 mm Year of manufacture: 2020-2022 You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), power: 160 kW (217.54 HP), fuel type: diesel, color: blue, Year of construction: 2023, operating hours: 35 h, Year of manufacture: 2023 Drive: Wheeled Number of cylinders: 6 Unladen weight: 33,800 kg CE marking: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2023 – UNUSED DEMO VEHICLE Engine: Deutz 160 kW Boom reach: 16 m, Boom: 8.5 m, Stick: 7.2 m Hose rupture protection on the boom Cab: Fuchs Fox Cab hydraulic cab elevation Air conditioning Build: Standard Fuchs color Central lubrication Undercarriage: Mobile, 4 stabilizers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab Technical data Number of cylinders: 6 Fuel type: Diesel Gbedpfx Asyiuqhsp Deu FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Payload: 0/4 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 250 Kg Mounting: Floor Godpfxjh Au Inj Ap Djbu

Condition: used, This is a rack trolley from the premium manufacturer Rational, suitable for the XXL model combi-steamers SCC/CM/CMP in the 20-2/1 GN size. RRP (gross): €2,400, our special price: €1,495 (gross) You will receive an invoice including VAT. Service: We are happy to assist you in arranging a certified Rational customer service technician. Looking for a specific Rational model? Contact us—we have access to a wide range of new and used equipment. We are glad to advise you on all device types. Our used equipment service for you: • 6 months warranty on electrical parts (limited to replacement of defective components, excluding labor costs) • High-quality branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice before and after your purchase • Provision of user manuals, wiring diagrams, and spare parts • Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 772 x 1,016 x 1,717 mm Clearance, lowest tray to cooking chamber opening: 50 mm Clearance, highest tray to cooking chamber opening: 87 mm Max. loading height: 1.60 m 20 tray slots 2/1 GN With container lock Accessible from both sides U-rails 4 tandem swivel castors (2 with brakes – metal parts made from stainless steel) Removable and drainable drip tray Rail spacing: 63 mm Weight: 65 kg Material: Stainless steel Item no.: 60.22.086 Godoypcfyepfx Ap Dsbu Capacity: 20 x 2/1 GN roasting and baking trays, racks 12 x H6-1/1 chicken grill racks (up to 1,500 g) 12 x H8-1/1 chicken grill racks (up to 1,300 g) 12 x H10-1/1 chicken grill racks (up to 950 g) 40 x 1/1 GN, 20, 40, 55 mm deep 12 x 1/1 GN, 65, 90, 100 mm deep Use for other containers: 1/1 GN, 2/4 GN crosswise Corrosion-resistant stainless steel (CNS 1.4301) Condition: Used Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the item in person? You can reach us by phone during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Net price: EUR 1,100 negotiable. Gbsdpfoyutnpex Ap Dou

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Godpfotmrkrex Ap Djbu -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Gbjdpfxezwk D Se Ap Dou Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, 17.10 m Jungheinrich Type T Pallet Racking Manufacturer: Jungheinrich Type: T Racking height: 5600 mm Gedpfox Rp Hbex Ap Djbu Racking depth: 1100 mm Racking length: 17100 mm Bay width: 2700 mm Storage direction: Longitudinal storage Number of bays: 6 Storage capacity (Europallets): 72 Number of shelf levels: 4 (including base level) Shelf width: 2700 mm Shelf load: 3000 kg Bay load: 12,000 kg Scope of delivery 07 x Jungheinrich uprights 5600 x 1100 mm, blue welded frame 36 x Jungheinrich crossbeams 2700 mm, yellow You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Gsdpfx Apoz Ed D Es Dsbu Maximum permissible load: 126,000 kg Payload: 89,800 kg