Used Horizontal machining centers with shuttle table (wood) for sale (214)

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Gbodpfez Ekfvox Ap Dju Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Gbjdpfx Apsz Nwa Ns Dju Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm

Condition: good (used), Year of construction: 2016, machine/vehicle number: 302.11.021.16, functionality: fully functional, operating hours: 573 h, power: 12 kW (16.32 HP), input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 12, For sale is our FORMAT4 profit H200 13.33, manufactured in 2016. The CNC machine was primarily used in our carpentry shop for furniture and interior design and has relatively few operating hours. Equipment includes: * 4-axis CNC * Additional swivel unit * Tool changer * Console table with vacuum clamps * Vacuum pump included * Operator station incl. PC and handheld device * Includes tool set * Only 572 operating hours The machine is being sold due to the closure of our carpentry shop for health reasons. It is currently connected and ready for operation and can be inspected and tested by appointment. Location: 48308 Senden Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own expense. Price: €37,000.00 net, negotiable / €44,030.00 gross, including 19% VAT. An invoice with VAT will, of course, be issued. Gbsdpfx Aoz Imtnep Dsu

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Godpfx Aez H Rp Dsp Dobu

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups Gedoykn Dwopfx Ap Dobu 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min Gbedpfx Apezwt Nde Dsu The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, spare drive components, and an Extract DUO two-bag dust extraction system. The machine has low operating hours and has been serviced annually by an authorized dealer. The machine can be inspected while in operation. The sale price includes professional disassembly and loading onto a truck for transportation. The buyer is responsible for arranging and covering the costs of transportation. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Gbedpfxoz E Rinj Ap Deu Bumper – safety system EN1760-3 14 tool storage spaces on the moving part and an additional 8 on the fixed part Technical specifications of the included dust extraction system: Fan power kW: 5.5 Filter surface area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Airflow rate m3/h: 6000

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Gbedpfx Apszwcfzs Deu Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 11,000 mm, total width: 4,000 mm, overall weight: 2,600 kg, year of last overhaul: 2026, Machining center, fully rebuilt and in perfect working order. 6-month warranty on parts. Please feel free to ask any questions. Gbodpfxsz Ny Rwe Ap Dou

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Gbsdpfxjz Ii Axo Ap Dou Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: used, HolzHer 7023 K CNC machining center Year of manufacture: 2008 Power supply: 3 x 400 V Traversing system (beams and suction cups) with 6 beams, Tool magazine for 12 positions, 3-axis milling motor, Drilling head, Horizontal milling motor (for doors). Gbjdpoz Nh Tgefx Ap Dou

Condition: ready for operation (used), Year of construction: 2004, IMA Bima 210 Year of manufacture: 2004 Milling area: 3000 x 1200 C-axis Liquid-cooled milling motor Drilling unit Vacuum pump 6 supports Schmalz vacuum cups HSK 63-F Saw unit Machine in good condition Gsdpfsz E U A Sex Ap Dsbu Angled unit Available at the end of December 2026

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. Gbedpfxjzy Hdas Ap Deu The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical - LED display of the vacuum pump position Gbjdpfx Apjza Urye Dou - Tool magazine: 12 slots

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a HOMAG BMG 311 Venture 316 L CNC machining center manufactured in 2011. The machine is currently in operation and can be inspected and tested while powered on until its availability in November 2026. A video of the machine in operation is available; see the advertisement or YouTube. Equipment: Gbedpfx Aoz Ek Htjp Dju * HOMAG BMG 311 Venture 316 L * Year of manufacture: 2011 * Control system / Software: WoodWOP 6.1 * Tooling will NOT remain on the machine * Vacuum pump included * Currently powered on and operational * Inspection and test run possible until November 2026 The machine is suitable for the professional CNC machining of wood-based materials and, due to its extensive equipment, is immediately ready for further use in production. A detailed functional test on-site is possible by arrangement. Availability: from November 2026 If you have any questions about the machine, require further technical data, images, or would like to arrange an inspection appointment, please do not hesitate to contact us. Contact: Dennis Bitzigeio Company: BIMA Maschinen & Zubehör

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. Gedjzypnbepfx Ap Dsbu The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Gedpsuyl Npjfx Ap Djbu

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: Gedpez Af Sujfx Ap Djbu - Beam table: Ergonomic and quick to adjust for various workpiece sizes. - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Processing line for solid wood and MDF boards, including rotary tables and 2 Weeke 500 drilling machines, with stacking units. The line has been dismantled due to the company ceasing its solid wood operations. The line can be divided, and the machines can be purchased separately. Gsdpezb D Nksfx Ap Dobu

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: Gbodpfx Apozlbpbj Dsu The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2004, functionality: fully functional, For sale is a HOLZ-HER Eco Master 7120 CNC machining center, suitable for the precise processing of panel materials in the production of furniture and other carpentry products. The machine is located in Labin (Istria, Croatia). Price: 20,000.00 EUR Service and condition: The CNC machine is regularly serviced. The main motors have been replaced. New ceramic bearings have been installed. The machine is part of a production facility for the manufacture of panel furniture and is ready for continued use. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The facility also includes: Gsdpfozp U H Isx Ap Dobu HOLZ-HER Sprint 1321-2 STUF edge banding machine HOLZ-HER 6110 CUT 70 panel sizing saw Lazzari UNO 3000i circular saw Polymac curved edge banding machine Polymac machine for processing ABS edge banding Busellato drilling machine Table router for creating grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm Gbsdpfx Apozlbp Uo Dsu - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel Gsdpfx Apozlz Svs Djbu • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Gsdpfx Apoznk Rmj Dsbu

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Gbodpfxov Rlpye Ap Dou Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.