Used Micromill V 22 for sale (41,415)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions Kdodpfxszb D Aqe Adlst MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Kdsdpfozxf Sysx Adlet Location: Customer.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Datacon 2200 EVO (Gen3) The die bonder / multi-chip assembly machine from Datacon (Besi). Die attach, multi-chip, and flip-chip capabilities. Kdsdpfxjy S S Uwe Adlet Placement accuracy: ±10 µm at 3σ Theta: ±0.15° at 3σ Bond force: 0.5–75 N Up to 4 working heads Wafer handling up to 12 inches Die attach up to approximately 7,000 UPH/module Flip-chip up to 2,500 UPH with dipping Heated bond head up to 450 °C Substrate area up to 325 × 200 mm Weight approximately 1,300 kg

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm Kdodophmxrjpfx Adlst ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: • Model: HSM V-Press 825 plus pro • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 See for yourself how the press works! Kedpsz Ad Rpsfx Adlsdt Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly.

Condition: good (used), Year of construction: 1998, operating hours: 13,143 h, functionality: fully functional, nominal power (apparent): 22 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, For sale is another CNC vertical machining center, a DECKEL MAHO DMC 63 V from 1998, used and in good condition, commensurate with its age. The machine is operational and can be inspected in person with power applied, by prior arrangement. • Year of manufacture: 1998 • Control system: Siemens Sinumerik • 4th axis with clamping device • Tool magazine • Coolant system • Operating hours: approx. 13,143 hours in single-shift operation Mains voltage: 400 V Frequency: Hz Rated current: 17 A Apparent power: 22 kVA Auxiliary voltage: 230 V Control voltage: 24 V Type: DMC 63 V Serial number: A0883 Kdodjz Dplfepfx Adljt Machine number: 999-d-076 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 131 644, overall weight: 14,000 kg, total height: 3,550 mm, type of input current: three-phase, total length: 3,400 mm, total width: 2,000 mm, input voltage: 400 V, control voltage: 24 V, distance between side stands: 400 mm, distance between stands: 1,080 mm, year of last overhaul: 2026, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm table dimensions: 1080 x 800mm Ksdefn Affjpfx Adlodt slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven Ksdpfxexwk S As Adlodt - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar Kedpjzug N Eofx Adledt • Suction air speed: 30 m/s Additional equipment • Flat vacuum table with suction cups

Condition: used, Year of construction: 2003, load capacity: 5,000 kg, lifting height: 2,840 mm, total length: 4,635 mm, Gas forklift Kedpfxsztf Rxs Adlodt Yale GLP55MJ V2214 Drive Gas Year built 2003 Lifting height (mm) 2,840 Lifting weight (kg) 5,000

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 3kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 3.0kW - Energy requirements: 40.0kW Kdsdpfx Ajrum I Ujdlst - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommended thickness 10.0mm, maximum thickness 12.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 6kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm Kdedpfx Ajrum N Iedljt - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommended thickness 10.0mm, maximum thickness 12.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis Kdodeuxfu Nspfx Adlot - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Kdjdpfozilz Njx Adlet Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, year of last overhaul: 2021, Equipment: CE marking, We offer this Mitutoyo QVT1-L2022IL-D coordinate measuring machine, like new, year of manufacture 2017. Code: 364-109Y Model: QVT1-L2022IL-D SO number: Kjdpfx Adsyaympjljdt Serial number: 62736222 Year of manufacture: 2017 If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the Kedpfst Hxagox Adlsdt cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Kedpfxezfi Dts Adlsdt Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: as good as new (ex-display), Year of construction: 2018, Fluid Couplings, Also many Electrical Motors and Gearboxes on stock. Kdjdpfsglvv Hjx Adlet Large stock of used and unused Fluid Coupling from manufacturers like Voith and Flender Different types, Shaft sizes and build.

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Drive motor 4 kW Oscillation motor 0.75 kW Belt speed 22 m/s Pneumatic belt tensioning Ksdpfxezg Itvs Adlsdt Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Kdsdpfoylirljx Adlot

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts Kedpjh Hfldjfx Adlodt The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Ksdpfxszxhmts Adljdt Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: used, Year of construction: 2016, operating hours: 3,022 h, lifting height: 5,720 mm, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich ETV C16 reach truck, year of manufacture: 2016, battery: 2016, hours: 3,022h!, previous owner: German Armed Forces, rated load capacity: 1,600 kg, lifting height: 5,720 mm, fork length: 1,000 mm, side shifter, triplex mast with free lift, including charger, overall height: 2,400 mm, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! Rental possible. = More information = Kedpfx Adoz Dnabslsdt Lifting capacity: 1,600 kg Overall height: 245 cm Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Demo Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Ksdpfxszv R I Us Adljdt Hours: 485 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (allowed in ZONE 22) Temperature class = 200*C (= T3) C - Db

Condition: excellent (used), Year of construction: 2000, Cast resin epoxy distribution transformer 1 pcs 2000kVA, manufactured by SGB Germany, voltage ratio 22000 ( ± 2 x 2,5 %) /400V, Dyn1 or 5 or 11, IP31 or IP00, Al/Al, temperature monitoring unit, functional. Kdsdelpd Tcopfx Adljt