Used Output Board 16*220 for sale (23,124)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Hedsy R Npcjpfx Am Donl Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2017, Complete welding system based on a KUKA KR 16 L8 arc HW industrial robot with KRC4 control and a Fronius CMT welding system. The set is equipped with a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. Technical data Industrial robot Model: KUKA KR 16 L8 arc HW Article No.: 10023544 Serial No.: 867099 Year of manufacture: 06/2017 Number of axes: 6 Payload: 8 kg Reach: 2015 mm Weight: 240 kg Positioner/rotator Model: KUKA KP1-HC1000R980 Article No.: 16008950 Serial No.: 152228 Year of manufacture: 06/2017 Weight: 850 kg Cooler Model: Fronius FK 4000-R FC Article No.: 4,045,837,632 Serial No.: 28245627 Supply voltage: 400 V Frequency: 50–60 Hz Current: 0.6 A Max pressure: 4 bar (0.4 MPa) Power: 2 kW Protection class: IP23 Wire feeder Model: Fronius VR 7000-CMT 4R/G/W/F++ Article No.: 4,045,963,000 Serial No.: 28245629 Voltage U11: 55 V / 4 A Voltage U12: 24 V / 2 A Wire feed speed: 0.5 – 22 m/min Welding current: – 360 A (100%) Hnedoy Hktnjpfx Am Del – 450 A (60%) Protection class: IP23

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Hjdpfxou A Thlj Am Dsnl Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: excellent (used), Year of construction: 1996, Huriccan Dambauer chip extraction system Filter area: 40 m² 4 barrels (chip containers) Hjdpey Sv Axjfx Am Donl Air volume: 5000 m³ Motor power: 5.5 kW Complete with extraction pipes and pneumatic shut-off valves for 8 machines Self-dismantling (dismantling and loading available at extra cost) Price: 5000.- Available from August 2026

Condition: good (used), Year of construction: 2020, operating hours: 2,584 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 500 kg, mileage: 2,584 km, Electric pallet truck Brand: Still (Germany) Year of manufacture: 2020 Hours: 2,584 h Capacity: 1,600 kg Battery: lithium with charger Hnsdpfx Aey Sazxjm Dsl

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: Hnsdeikvdqjpfx Am Djl switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Hjdpfswra S Rsx Am Dsnl Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings. Hodpfx Asy H Iruem Dsnl

Year of construction: 1971, condition: used, Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Hsdpfx Amsh U R T Ss Denl Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Design: Automotive EMC / on-board network testing system Format: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK, designed for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test technology. The system is supplied with a laptop featuring pre-installed control and test software, making it ideal for professional laboratory, development, and test bench use. The system comprises several integrated test modules, cooling fan units, as well as various power, control, and interface components. Visibly identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function according to display: Voltage Drop Simulator Serial number on display: SWN 001638 AutoWave display: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display: DC Supply Waveforms Firmware: V2.02.00 Generator: V2.01.01 Additional model designation (from documentation): VDS 200Q100.2-208 Connections / Interfaces: - Ethernet - IEEE 488 Hnedpfxjy Rlbho Am Dsl - USB VDS - Frame Bus In / Frame Bus Out - Analog In - AutoWave CH1 / CH2 / CH4 - 0–10 V connection - DC output / output connectors - CEE power plug - Emergency stop switch Features: - Mobile industrial/19" cabinet - Multiple integrated cooling fans - Front control and terminal panels - Rear power and interface connections - Side-mounted emergency stop switch - Industrial-grade build for laboratory, development, and test bench applications Potential application areas: - Automotive test engineering - On-board network simulation - Voltage drop simulation - Electronics and component testing - EMC/EMI laboratory - Research and development - Quality assurance - Test bench and measurement applications Technical notes: - Four-quadrant voltage drop simulator - Suitable for automotive voltage profile testing - Supports various automotive test standards, such as LV 124, LV 148, ISO 7637-2, ISO 16750, and similar standards - Output range per documentation: -20 V to +80 V - Bandwidth up to 250 kHz Condition: Used device with age- and use-related signs of wear. See pictures for cosmetic condition. Unit powers on; displays are active. A full technical function test under load has not been performed. Dimensions & weight: Exact dimensions and weight have not been established. Due to its design as a mobile industrial cabinet, assume corresponding industrial-grade weight. Exact measurements and weights can be provided upon request. Scope of delivery: - emtest / AMETEK test system in a mobile industrial cabinet - Laptop with installed control and test software - AutoWave module - VDS 200Q / VDS 200Q100.2 module - Built-in fan and connection units - Scope of delivery as shown in images Notes: - Inspection possible by prior appointment. - Loading can be arranged. Commercial sale – sold without warranty. Subject to changes and errors.

Condition: good (used), Year of construction: 2012, Manufacturer: RÖSLER Type: R 220 EC Year of manufacture: 2012 Bowl volume 220 liter Out side diameter 1200 mm Hnjdpfxovt Tlze Am Dol Width processing channel 300 mm Overal channel length 2800 mm Power 2 kW Rosler Switch Unit Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) Length 1400 mm Width 1400 mm Height 1400 mm Weight 2000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and contractual terms. We recommend that you check all important details. Share on

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Hsdpewvq Taofx Am Denl Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Hnodjkwcdbjpfx Am Djl Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Table size 400 x 400 mm Table height 850 mm Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm Hedpfx Amey N Duwo Djnl - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch Hsdsy N Dukjpfx Am Donl - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hnedpji Ecipsfx Am Del

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hnedpji Ecitjfx Am Dsl

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hnjdpfx Amji Eciwe Dsl

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Hnedsmck Ryspfx Am Del Weight approx. 1000 kg good condition

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler -Tensioning pliers: sealing device for strapping -for staples: approx. 16 mm width -Dimensions: 450/100/H110 -Total weight: 2.9 kg Hodpfxei E Af Ro Am Djnl

Year of construction: 2013, condition: as good as new (ex-display), Specialised vibratory machining machine type R 220 DL. Hodohvy S Dopfx Am Djnl Machine in like new condition. Only 20 hours worked! You are welcome to buy it.

Condition: used, machine/vehicle number: IC1396, Year of construction: 2019, operating hours: 3,407 h, load capacity: 1,600 kg, lifting height: 3,360 mm, construction height: 2,160 mm, fork length: 1,150 mm, enginetype: Electric, manufacturer: Still Hnsdpfjy Rwckjx Am Dol

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Max. panel length: 1600 mm Main saw blade projection: 125 mm Hodpfxjyl Iiis Am Dsnl No of Grippers: 5

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Hsdpfx Amey Nbbze Djnl Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: used, mileage: 62,200 km, power: 350 kW (475.87 HP), first registration: 07/2000, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: semi-automatic, emission class: euro2, Year of construction: 2000, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MB Actros 1848 All-Wheel Drive 4x4 with leaf suspension * Superstructure by Ziegler * Water tank 2,480 L * Foam tank 510 L * Powder tank 250 kg * CO2 extinguishing system 480 kg * Foam extinguishing system * Rescue platform and fire-fighting platform at the front, max. height 3.8 m, load capacity 300 kg * External planetary axles * Speed limiter up to 140 km/h * Axle ratio i=4.833 (HL7) * Wheelbase 3,900 mm * V8 engine LA 350 kW (476 hp) at 1,800 rpm * Transmission oil cooling * Auxiliary drive NF1 MB 125-10b, flange, medium speed * Auxiliary drive NZ 1, single * Auxiliary drive NZ 4 with shafts * Drum brakes * Telligent 16-speed gearbox with clutch pedal (automated shifting, clutch pedal foldable) * Reinforced clutch * Transmission G240-16/11.7-0.69 * Transfer case VG2400-3W, 1-speed * Reinforced springs, front and rear axles * Front axle rated at 9 t * Rear axle rated at 13 t * Front axle springs 10.5 t * Rear axle springs 13 t * Weight variant 21.5 t approval (10.0/13.0), e.g. for winter service * Circuit breakers * Reinforced cab suspension * Tires 395/85 R 20, 80-90% Michelin * Technical and operational total weight 20,500 kg * Transfer case with reduction * Differential locks front and rear axle * Reinforced frame * Reinforced stabilizers for extreme heavy-duty applications * Reinforced steering * Medium-length cab * Electric window on passenger side Hodpfey Svdcox Am Denl * Air conditioning * Stationary hot air heater Eberspächer D1 LP * Various additional spotlights * Trailer brake system * NATO trailer hitch * and much more * Subject to errors, changes, and prior sale