Used Pneumax Parker Pes-C11F4 for sale (1,315)

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Iiedsvntmnspfx Apmsd Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Used steel staircase / machine access platform Floor height: approx. 515 mm Outreach: approx. 590 mm Total width: approx. 700 mm Mesh size: approx. 25 x 25 mm Material color: yellow Tread dimensions: 1x approx. 675 x 250 mm (upper tread) 1x approx. 475 x 250 mm (lower treads) Number of treads: 2 pieces / treads installed Tread height: approx. 265 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Iodpfjhhxu Hox Apmoid Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw Isdpfx Apoqwlmqsmeid mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: new, Year of construction: 2013, functionality: unexamined, I am offering for sale a lot of 7 industrial multi-stage pumps from an old professional stock. The equipment is new, never installed, and has been stored since 2013. Lot composition: 2 × Wilo MVI 5206-3/16/E/50-2 2 × Wilo MVI 3204-3/16/E/50-2/ntec 1 × Wilo MV116 bp65/200 2.2/4 1 × Franklin / E-Tech VS30/09 6" - 6" 1 × Franklin 6" submersible motor 236 613 9061 General characteristics: Vertical multi-stage pumps Applications: clean water, pressure boosting, industry, HVAC Recognized brands: Wilo / Franklin Electric Robust construction (stainless steel / steel) Nameplates present Stored in a dry environment No assembly / never put into service Applications: Industrial installations Iisdey Skuvjpfx Apmsd Pumping stations Water treatment HVAC / pressure boosting Maintenance and spare parts

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Iisdpezdrzfjfx Apmed Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: excellent (used), Index cutting machine Iijdpfx Apshbwbpemjd Working size: 440 x 100

Condition: excellent (used), A used Krupp-Esch cone crusher (gyratory granulator) Type KG1 is offered: Feed size: 5 - 50 mm, 36 kW, Weight: 6 t. With pre-screening double-deck screen 0.80 x 2.00 m. In very good condition. Ijdjwy U Suopfx Apmjid

Year of construction: 1989, condition: used, Used CNC lathe in good condition with NUM CNC control. Includes chip conveyor, coolant system, hydraulic power chuck, jaws, and tool holders. Turning diameter over bed: 360mm Iiodpfx Aeflhcmjpmsd Turning diameter over cross slide: 260mm Max. turning length: 625mm Spindle speed: 3500 rpm Spindle bore: 42mm Technical data and dimensions: Subject to change without notice. Further technical data can be found in the PDF document.

Year of construction: 1997, condition: excellent (used), PEWOPACK 450 SN is a stretchbander with electronic/pneumatic controls to produce single packs or muliple collations. It is designed for stacking of carton boxes and packing them into shrinking foil. Output max. 60 cart/min Iisdpfx Apedy U Ausmjd Folientyp: PE Width of foil 50 - 450 mm Foil thickness 0,025-0,100 mm Diameter of the roll max. 300 mm

Condition: used, Hydraulic paper press Connection: 16 Ah Please contact us if you have any further questions. Iedpfx Asgg S Ayjpmoid Thank you in advance, just get in touch. The machine has been cleaned and inspected and tested. It can be put into operation immediately. The system is located in Croatia / Vinkovci.

Condition: new, functionality: fully functional, conveyor belt length: 1,850 mm, conveyor belt width: 200 mm, total height: 2,150 mm, Length 185 cm Width 20 cm Height 215 cm Carrier 3.5 cm Isdpfx Apjxqgqbomoid With a large storage container PRICE REDUCTION FROM 1750 TO 1500 EUR!!!

Condition: excellent (used), We offer used R-KLT and C-KLT crates in larger quantities. Available models: KLT 3215 KLT 4329 KLT 6280 KLT 4328 C-KLT 6428 Prices start from: €2.50 per unit for type 3215. Isdsxziv Uepfx Apmjid This price applies only to full truckload orders. We do not ship individual items or small quantities. The crates are free from grease/oil contamination and are undamaged.

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Iiodpfjl Hx Rdex Apmod

Condition: used, Year of construction: 2003, Heavy-duty trailer, load capacity 3000 kg. Manufacturer: Kampa, year of manufacture 2003. A5 L 5000 mm W 2000 mm H 500 mm, load capacity 3000 kg, year 2003, towing eye 35 mm, good floor made of anti-slip plywood, manufacturer KAMPA. Iedjtymnajpfx Apmjid

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 22000 - 10000, input voltage: 240 V, The machine was purchased in 2019 and has never been used. Only FAT/SAT commissioning has been carried out (no production). Various format parts are available and will, of course, be included in the sale. The machine can be inspected at any time by appointment. Additional photos are available upon request. Serious offers are always welcome. Transport can be arranged by mutual agreement. Iijdpfsyx Sk Eex Apmed If you have any questions or comments, please feel free to contact us.

Condition: used, Year of construction: 2001, Manufacturer : PCM Pompes Model : Moineau MV6l5 Year: 2001 Iiodpfx Ajx R D H Nspmsd Type : Progressing Cavity Pump Motor : 1,1 kW - 1500 rpm ATEX : EExd IICT4 Volume : 1 - 2 m3/h Pressure : 2 bars Flow proportional to rotational speed

Condition: used, Year of construction: 1997, Manufacturer : Supertape Systems Model: H6 Year : 1997 Type: taping / sealing machine for cartons. Operating mode: semi-automatic Iisdpsx R Atuefx Apmsd Max carton width : 280 mm Maximum height: 250 mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Pester Pewo pack 250 compact trade fair demonstration machine (no production hours) New build 2025 The PEWO-pack 250 compact includes the following assemblies (standard equipment): - Vertical infeed transfer conveyor - Protection rating: IP54 (standard) - Control cabinet: swiveling - Proximity switch: Wenglor (standard) - Pneumatics: pneumatic (standard) - Signal light: three-color (standard) - Electrical specification: electrical standard S rev 15 - Frequency inverter: Lenze (standard) - Product infeed: linear, central Technical data: - New operator interface HMI - Type: HMI 15" Pester Tangius (standard) - New control system: Schneider Electronics - Voltage: 3x400V+N+PE, 50 Hz/60 Hz - Operator side: right - Safety cover: acrylic glass (standard) - Paintwork: VA design (standard) - Packaging material - film: PE flat film - Documentation - language: 2x German + 1x CD - Documentation - version: standard - Documentation - supplier: 1x - Discharge height (preliminary, other machine): not yet known Iedpfoym N Icex Apmsid - Infeed height, Pester machine: 900 - 950 mm - Discharge height, Pester machine: 980 - 1030 mm - K-pallet 400x180x250 mm for Pack compact Power by Knoll VpA

Year of construction: 2008, condition: excellent (used), Pesa feeding belt 1,2 m belt conveyor 60 cm Pesa Iedpfxsmf Tkuo Apmoid length: 1195 mm belt width: 600 mm Protection class: IP54 3x400 VAC 0,37 kW 0,6 m/s year: 2008 Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Iodpsmdn Trsfx Apmoid Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Iisdpfx Aeiq Hxvspmsd Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt Mechanical design: in accordance with DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servomotor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: Working area width: 510 mm (optional widening: +240mm / +530mm) Max. test stroke without testing tools, adapters and load cells: 1095 mm (optional extensions: +250mm / +500mm) Optional: Conversion to a benchtop model, required additional component: base table Travel speeds: Iodpfx Aoiq Hxcspmjid Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range of 0.4 - 100 % of the nominal load, class 1 (optional class 0.5) (+/- 1 % of the displayed value in accordance with DIN EN ISO 7500-1) Resolution of the force measurement: +/-180,000 digits with a 20ms integration time The machine is supplied with a factory test certificate. If a factory or DKD calibration is to be performed at the customer's location upon request, this additional effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Iijdpjmdpafefx Apmjd Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC Mechanical design: compliant with DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: Working area width: 420 mm (optional widening: +190 mm / +330 mm / +620 mm) Max. test stroke without test tools, adapters and load cell: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: Conversion to a benchtop model, required additional assembly: base table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Isdpfx Apoiq Hw Uomoid Force measurement: Measuring range: in the range of 0.4 - 100% of the nominal load, class 1 (optional class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Resolution of the force measurement: +/- 180,000 digits with a 20 ms integration time The machine is delivered with a factory test certificate. If a factory or DKD calibration is to be carried out at the installation site at the customer's request, this effort must be calculated separately. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Model: SAF 30NC Isdpfxoxp H Evj Apmjid With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set