Used Podajniki Wibracyjne Vibratory Feeder for sale (2,681)

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container Hsdpfszktq Ijx Akrjnu - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: good (used), Morgana Plockmatic BM 2000S Digital Booklet-Making System The machine is in full working order and ready for production. Hodez S Uqqjpfx Akrsnu A professional, automated booklet-making system from Morgana (part of the Plockmatic Group), designed for medium- to high-volume digital and offset print finishing environments. The system consists of: – Morgana VF602 sheet feeder with two bins, featuring air-assisted feeding – Morgana BM 2000S stitcher-folder unit, equipped with two wire-stitching heads – Morgana FTR 2000 trimmer – Morgana SQF 2000 square-fold unit BM 2000S Booklet-Making System Capacity: 1–25 sheets (80 gsm paper) Speed: up to 1,800 sets per hour Sheet size: max. 320 x 470 mm / min. 120 x 210 mm Paper weight: max. 300 gsm / min. 60 g/m² Stitching modes: saddle stitching, side stitching, and corner stitching Stitching heads: 2 Job storage: yes, 10 jobs Dimensions: including base and belt delivery unit – 1135 (H) x 1520 (W) x 680 (D) mm Weight: 161 kg VF602 Feeder Capacity: 2 x 270 mm / 2700 sheets (80 g/m² paper) Sheet size (width x length): max. 350 x 660 mm Sheet size (width x length): min. 120 x 210 mm Paper weight: max. 300 g/m² / min. 60 g/m² Throughput/speed: feeding speed (note: speed limited by the booklet-making unit) – up to 15,000 sheets per hour FTR 2000 Trimmer Capacity: 30 sheets (80 g/m² paper) Booklet length: max. after trimming 220 mm / min. after trimming 120 mm Booklet length: max. in pass-through mode (without trimming) 235 mm / min. in pass-through mode 105 mm Booklet width: max. 320 mm / min. 120 mm Speed: up to 1800 sets/hour Trim length: up to 15 mm Dimensions: including stand, 1100 (H) x 350 (W) x 595 (D) mm Weight: 83 kg SQF 2000 Squarefolder Capacity: 30 sheets (80 g/m²) Booklet (width x length): max. 320 mm x 228 mm / min. 120 mm x 105 mm Speed: up to 1800 sets/hour Dimensions: including stand, 1100 (H) x 350 (W) x 595 (D) mm Weight: 60 kg Touchscreen interface for quick format changes. Switch the machine to a different format with a single click.

Condition: good (used), GUK FA 36/4 FL2-36 Folding Machine Machine in very good condition. Made in Germany. Hedpfx Akoz S Uxueronu Ideal for the production of pharmaceutical leaflets. Equipment: – 4 parallel folding plates – „Hang-on” style delivery – Counter with batching function – Advanced high-pile feeder with an additional suction head – Rietschle compressor – Folding plates adjustable via dials – Soundproofing for all folding plates – Tool kit, additional components, and manual. Technical specifications: Max. format: 360 × 880 mm Min. format: 60 × 140 mm Very small fold size: approx. 18 mm Operating speed: 10,000 – 30,000 sheets/hour Power supply: 400V

Condition: new, Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm Hnodjfdl Evjpfx Akrsu

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 20 l, inner dimension width: 200 mm, inner dimension length: 520 mm, Müller Mechanik – Vibratory Finishing Technology – MADE IN GERMANY Our trough vibrators replace manual deburring and grinding processes. Hodpfjfid Sqsx Akronu Avoid time-consuming and costly manual operations in the future! With the trough vibrators from Müller Mechanik, you will achieve reproducible processing results of high quality. MMTV-5321 – Technical Data: - Useful volume: 20 dm³ - Max. payload: 80 kg - Motor speed: 1500 rpm - Polyurethane wear coating, seamlessly cast, wall thickness 10-12 mm - Operating voltage: 3N ~ 50 Hz 400/230 V, connection power 0.25 kW - Empty weight: approx. 68 kg - Process control, switching range: 1 min - 99h 59 min - Dosing pump control, switching output: 230 V ~ 50 Hz max. 2 A

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 120 l, inner dimension width: 400 mm, inner dimension length: 930 mm, Müller Mechanik – Vibratory Finishing Technology – MADE IN GERMANY – Our trough vibrators replace manual deburring and grinding processes. In the future, avoid time-consuming and costly manual work! With the trough vibrators from Müller Mechanik, you will achieve reproducible processing results of high quality. MMTV-9341 – Technical Data: - Usable volume: 120 dm3 - Trough internal dimensions: 930 x 410 x 510 mm Hsdpfsfid Tcsx Akronu - Wear-resistant coating: Polyurethane, 18 – 20 mm - Maximum payload: 400 kg - Empty weight: approx. 490 kg - Operating voltage: 3N ~ 50 Hz 400 / 230 V - Connected power: 1.5 kW - Motor rated speed: 1,500 min-1 - Speed control stepless via frequency inverter

Condition: ready for operation (used), IN STOCK - Hedpfxjir E Rme Akrenu Twin section feeder

Condition: ready for operation (used), IN STOCK - Hnodpfoir E Ruex Akrju 2 x feeders - Model 888

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Hjdpfx Aeu Tkraekrjnu Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Frame: With/Without With Stainless steel wear plate.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Hodpfjvi Nhdex Akrenu Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market Hnedpoq Ec Rgjfx Akreu The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. Hnjdpfx Akoq I Nvijrou 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Hnedpfsq Ngafjx Akrsu Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Hnsdpjrqzzpjfx Akreu Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: good (used), Bar feeder LNS Hsdpfor Iygiex Akronu

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Hjdpfx Akjhlnzkjrenu Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Hnodjg Rxhgopfx Akrsu The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: used, Multisaw cross feeder Hnsdponwnpqsfx Akrju

Condition: ready for operation (used), To suit a MM 227/6 insert line- Price £5,000   IN STOCK Hodpfsq U Trdex Akronu

Condition: used, Year of construction: 2020, Pre-feeder 1600 width /2000m Bottom printing Max sheet 1270x2032 mm Min sheet 400 x 600 mm Thickness max: 9mm Max height of bundle 250 mm Min height of bundle 20 mm Height pile: Standard 1900 mm with elevation of 300mm : 220 mm With elevation of 500mm : 2400 Hsdpfx Akov Ni I Rerenu With elevation 700mm : 2600 Max weight pile : 1300kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ABC 8.20, power: 1.47 kW (2.00 HP), fuel type: electric, Clay, sand, and soil feeder - consisting of an 800 mm wide, 2 meter long conveyor belt with a material receiving hopper of approximately 1 m³; Hsdpsv Tlc Ssfx Akrsnu - flow rate of 3.25 to 56 m³/h controlled by a frequency inverter - equipped with a lump breaker/picking arm mounted on a shaft to scrape the material and regulate the flow rate

Year of construction: 2024, condition: new, Hello. I have a semi-automatic packaging machine for bulk goods such as spices, flour, sugar, semolina, etc. for sale. The machine packs weights from 5g to 5kg with 1% accuracy. The packaging speed is 500 to 1000 bags or sachets per hour. The machine consists of: 1. a screw feeder that feeds the product into the packaging machine. Using a sensor, the feeder automatically fills the packaging machine's hopper. The hopper has a capacity of 45L. 2. a packaging machine 3. a plastic bag sealer that seals the already packed bags. The machine's power requirement is 900W, 3-phase, 50Hz. The entire system weighs 150kg. Dimensions: 1000 x 650 x 2000 mm POSSIBILITY TO PACK PRODUCTS IN CANS OR JARS!!! PayPal payment available!!! Hjdstt Ip Iepfx Akronu

Condition: excellent (used), Length 630 cm Width 200 cm Roll width 32 cm Hnedpettl Avefx Akrsu 0.63 kW motor Infinitely variable speed regulation

Condition: ready for operation (used), Year of construction: 2011, Vibratory plate compactor Wacker Neuson DPU 6555 He, year of manufacture 2011, serial number 10043154, electric start, power 9.6 kW, weight 481 kg, with extension kit. Hnodjh Ha Daopfx Akreu

Condition: ready for operation (used), Year of construction: 2010, Wacker Neuson DPU 6555 vibratory plate, year of manufacture 2010, serial number 2147924, electric start, power output 9.3 kW, weight 476 kg, with extension. Hnodjh Ha D Ejpfx Akrju