Used Reamer Holder (5 Pieces) for sale (68,346)

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Hedszdizvopfx Abhsnp Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. Hnsdpjzdityofx Abhop You can find more milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Hjdpfx Aezhaqcobhsnp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Hnodpfeu Hrf Dsx Abhjp Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: used, This listing is for a second-hand DTG pre-treater, the ‘Schulze PRETREATmaker 5’ Condition: This is a second-hand unit, which may show signs of wear Hnedpfx Ajy R Nrksbhop (minor scratches or discolouration). The device has been tested and is in working order Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, mileage: 4,911 km, power: 26 kW (35.35 HP), first registration: 06/1991, fuel type: diesel, empty load weight: 1,365 kg, maximum load weight: 635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, total length: 3,000 mm, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Hodsxufn Tjpfx Abhenp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 43,500 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 43,500 mm, support length: 2,700 mm, 5 rows of pallet racking (5 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. - 20 frames (RM3511 - RAL5019) - 40 base plates, shims, fastening materials - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire territory of the Federal Republic of Germany; Hsdpfxoza R Ecs Abhsnp except for islands! Deliveries to EU countries are made according to individual agreements.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished turbines from a continuous shot blasting machine - Rösler RRB 22/5-L. Turbine type - Hurricane H42. The turbines have been refurbished using original spare parts made of tool steel. Shot blasting machine, sandblaster, blasting turbine, shot blasting, sand blasting, throwing turbine. Hnjdpjyy Rybsfx Abhsp

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Hodpjvictmjfx Abhjnp

Condition: used, diameter div. number 36x Hsdpfxoww Nb Ee Abhenp tool adaptor BT 40

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) Hnsdpfx Absy Ddycohep • Automatic edging feed: coil or strips

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Hnsdpfeqt Dmyox Abhep Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 1,37,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 1,37,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Hnjdjyzl T Ejpfx Abhsp Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Hnjdpfx Aeg Dgyxsbhjp Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty Hnjdpfx Aoy Rnrvebhsp + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Hsdpfx Absyg H Hiohenp Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 32 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC BMD 1000 S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1000 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 32 kg Dimensions (L x W x H): 580 x 450 x 1185 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) Hnjdpfx Abeyxb Adohop NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder Hodpfx Aoyw R N Robhjnp NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm Hodpjyw R Aqsfx Abhonp INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER Hnsdpfx Ajyw Rx Sjbhsp The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Hnedsyw Ru Topfx Abhep Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC NRP 1515 /S SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Hedpsyw Rqbofx Abhsnp Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, NUMATIC HFM 1515 SINGLE DISC SCRUBBER The cleaning head is equipped with a new disc brush and a holder with a complete set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Hsdpfx Absyw N Tnehonp Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning of very dirty surfaces) NEW black pad - aggressive (cleaning (for very dirty surfaces) TENZI NORMAL Fluid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 410 mm, overall weight: 31 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 10 l, NUMATIC HFM 1515 SINGLE DISC SCRUBBER THE MACHINE IS EQUIPPED WITH AN ADDITIONAL 10L WATER TANK. The cleaning head is equipped with a new disc brush and a holder with a set of pads for use on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Motor: 1500 W Voltage: 230 V Rotation speed (RPM): 150 rpm Brush/pad working width: 410 mm Weight: 31 kg Dimensions (L x W x H): 560 x 450 x 1250 mm INCLUDED: 10L WATER TANK NEW 410mm PPL 0.8 disc brush (hard) NEW 410mm pad holder NEW white pad - very soft (cleaning effect / surface polishing) Hsdpfjyw Nvvox Abhsnp NEW red pad - soft (cleaning effect / surface polishing) NEW blue pad: - medium (daily / standard surface cleaning) NEW green pad - hard (daily / standard surface cleaning) NEW brown pad - very hard (cleaning very dirty surfaces) (surface) NEW black pad - aggressive (cleaning very dirty surfaces) TENZI NORMAL liquid 5 liters - FREE KEY FEATURES: Thanks to its design, the machine is very maneuverable. A small turning radius allows operation even in narrow passages and alleys. The large working width (410 mm) ensures high surface coverage. A very clear and intuitive control panel.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm Hsdpfovz U Erjx Abhjnp External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module