Used Sat Norma-Sat 3.5 M³ Bt 150°C for sale (96,923)

Condition: used, machine/vehicle number: 13164, 1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150Serial-No. 7404 Online-Video-Inspection by Skype-Video Itjdpfx Aoh Aw Ugjlxek We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2002, RÜHLE MKR 150 400V. Vacuum. Cooling. Itsdpfx Alszut E Tsxok

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm Ijdpjyfm Ahefx Alxotk 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Itedpfx Aozt Nywelxjk Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: good (used), Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Controller For sale is an Indramat / Bosch Rexroth RAC3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, working condition. Technical details: Iodoxl A Ncjpfx Alxotk Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power: approx. 55 kW Ambient temperature: +5°C to +45°C (operation), −30°C to +85°C (storage) Max. operating altitude: up to 1000 m above sea level. NN Protection class: IP10, humidity class "F" according to DIN 40040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Itodpfx Alsxftvasxsk

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6AV2 124-0QC13-0AX0, input voltage: 24 V, type of input current: DC, TP1500 Comfort Outdoor HMI panel 6AV2 124-0QC13-0AX0 C-K3KJ7468 AC-64-17-01-2E-3C Iedpfxozicqbj Alxetk ATEX, Zone 2 1280 x 800 pixels Crack in the screen, but all functions still work perfectly; see video.

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Ijdpfxex Eg T Ej Alxjtk

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Itjdpsyhph Esfx Alxjk Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2018, functionality: fully functional, working width: 1,000 mm, area performance: 3,600 m²/h, overall weight: 584 kg, tank capacity: 160 l, total height: 1,380 mm, total width: 1,100 mm, total length: 1,850 mm, water tank capacity: 150 l, operating speed: 6 mm/s, battery voltage: 36 V, gradeability: 16 %, noise level: 59 dB, empty load weight: 296 kg, TECHNICAL SPECIFICATIONS FEATURES Working width (cleaning) mm 1000 Working width (vacuuming) mm 1300 Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Power supply Battery 36V Power consumption W 2650 Drive Front and rear wheel drive IP rating IPX3 BATTERIES Type Gel battery pack (6 units) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x quantity mm x no. 540x295x380 x2 BRUSHES Diameter - Pad x quantity mm - inch x no. 508 - 20” x 2 Motor power x quantity W x no. 500 x 2 Motor speed rpm 170/140 Weight (head) - specific pressure Kg - g /cm² 65;79;101 / 24;29:37 TRACTION DRIVE Motor power W 600 Maximum travel speed Km/h 6 Climbing ability at full load % 16 VACUUMING Motor power W 600 Vacuum (water column) mbar/mmH2O 165 / 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59* TANK Type Double tank Capacity (cleaning solution) l 150 Isdpfx Ajzpyi Ijlxjtk Capacity (dirty water tank) l 160 Weight (without/with batteries) Kg 296/584 Dimensions (L x W x H) mm 1850x1100x1380

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Iedpjzul Tvjfx Alxetk Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour Itjdpfezrihxjx Alxok - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. Iedpfxsziaggs Alxstk - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Isdpfx Asw Duvhjlxotk

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Iodpjxqx H Iefx Alxotk Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. Itsdpfx Aex D A Icelxok 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Capacity: 150 m³/h

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Iedpezkwvnofx Alxjtk Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Itedpfxsir E E Es Alxjk Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Itedpfx Ajzg I T Aolxjk Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Ijdpfxstyyvws Alxetk Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: used, Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Ijdpfxovap Rts Alxstk Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,716 h, travel distance X-axis: 260 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 3,450 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, product length (max.): 2,800 mm, number of axes: 3, This 3-axis EMCO Emcoturn 65 was manufactured in 2019. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 17 / 22 kW; Counter spindle: 11 / 16.5 kW • Spindle speed range: 60 – 5000 rpm • Spindle bore: Ø73 mm • Number of tool slots: 12 • Rotating tools: yes • Lubrication tank: 10 l • Pump drive power: 0.57 / 2.2 kW • Air pressure: 6 bar • Cooling pressure: 3.5 bar (optional 14 bar) • Air supply: 5 l/min • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle spindle nose: A2-6 • Main spindle bearing Ø: 105 mm • Main spindle torque (40% DC): 305 Nm • Max. chuck size: Ø250 mm • Counter spindle torque (40% DC): 80 / 125 Nm • Counter spindle spindle nose: A2-6 • Counter spindle max. chuck: Ø200 mm • C-axis resolution: 0.001° • Turret type: VDI30 • Turret max. speed: 5000 rpm • Turret max. power: 6.7 kW • Turret max. torque: 25 Nm • Turret indexing time: 0.2 s • Rotary tools: VDI30 • Rotary tools speed: 0 – 5000 rpm • Rotary tools torque: 25 Nm Itedsztc Rcjpfx Alxek • Rotary tools power: 6.7 kW • Coolant system tank capacity: 230 l • Coolant system flow rate: 15 / 65 l/min • Hydraulic unit max pressure: 50 bar Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn Itedpfx Alevtpdgsxok N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: used, Year of construction: 2017, Edge banding machine Itjdpfxszuykcj Alxjk Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Itsdpfoy Uuuxox Alxok Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system