Portal milling BRIDGEPORT VMC 1500

BRIDGEPORT VMC 1500 POrtal

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Bjdpfx Asyw Inqsbtswt Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Bwsdpfx Asxgu R Iebtjt Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Bsdpfx Asymk E Aobtswt Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Bedpfx Abeviq U Eetowt Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. Bedpfen D N H Tex Abtswt KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Bsdpfszipf Sox Abtjwt

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Bwedpfsyz Stlsx Abtet Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis Bjdpfx Abot Rmdzstswt *

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm spindle taper: BT 40 Bwsdpfetwy Dijx Abtet min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Bodpfx Aboxd Td Ustowt Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration