Used Sawdust Briquetting Press 6/26 for sale (60,034)

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Dwsdpfx Aped Nm Sis Dsc Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5250x1930x1860 mm Weight 6650 kg Djdpfxev A Hrgj Ap Dowc Total power requirement 71,68 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Dwedpsvz Ex Nsfx Ap Dec Weight 3000 kg Total power requirement 33,5 kw

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Djdpfx Apsxlq Nwe Djwc Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is See video Availability immediate

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Dwjdpfx Ajfci D Ajp Dec Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: excellent (used), mileage: 4,69,000 km, power: 375 kW (509.86 HP), first registration: 10/2014, fuel type: diesel, wheelbase: 7,510 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 10,350 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2014, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, fog lights, navigation system, power mirror, trailer coupling, = Additional Options and Equipment = - 2-pedal control - Alarm system - Power brake booster - Radio/CD player - Rain sensor - Beacon light - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system = Remarks = 10x6 euro 6 AJK rear tipper 26 m³ Pressure device Inspection valid until 21.11.2026 469,000 km In very good condition! Ready for immediate use = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Axle configuration: 10x6 Front axle 1: Max. axle load: 9,000 kg Front axle 2: Max. axle load: 9,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 11,500 kg Rear axle 3: Max. axle load: 11,500 kg Djdpfszr Hwkex Ap Dewc Weights Unladen weight: 20,020 kg Payload: 33,480 kg Gross vehicle weight (GVW): 53,500 kg Functional Body manufacturer: AJK rear tipper with cover flaps Tipper: Rear def Maintenance, history and condition MOT (general inspection): valid until 11.2026 Technical condition: very good Cosmetic condition: very good Identification Registration number: 19-BFH-1

Condition: used, Year of construction: 1988, ​Ayrıntılara bakın 248 / 5.000 Dodpfxsld Npvj Ap Dowc Çeviri sonuçları Çeviri sonucu Schutte 26 SF-DNT Multi Spindle Mechanical Lathe It is in working condition, our workbench can be seen in our Bursa Gemlik factory. It can be delivered as counter-adjusted specifically for your project. For this, the tooling and adjustment cost will be requested separately.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons Dodpfodfc Ikox Ap Djwc 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2024, condition: used, BD Plast BDOx2-6 120 continuous-flow hydraulic screen changer for plastic extrusion, manufactured in 2024. The double-plate design allows filter screens to be changed without interrupting production. Supplied with its hydraulic power unit and support trolley. Purchased in 2024 and first put into service in January 2026, once the extrusion line had been installed. The unit has seen limited use, with the line operating at less than 50% of its capacity. Dsdpfx Ajz N Hc Tep Djwc

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm Djdpfewh Naisx Ap Dswc - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 5,63,499 km, power: 180 kW (244.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,000 mm, total width: 2,500 mm, total height: 3,340 mm, loading space length: 6,800 mm, loading space width: 2,270 mm, loading space height: 2,100 mm, Year of construction: 2016, Equipment: AdBlue, tail-lift, Despite careful attention to entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino Dedpfxozz N U De Ap Djwc = Further Information = Technical Information Engine displacement: 5,132 cc Front axle: Steered; Suspension: Leaf spring Rear axle: Dual tires; Suspension: Air suspension Weights Unladen weight: 7,235 kg Payload: 4,755 kg GVW: 11,990 kg Functional Features Tail lift: D'Hollandia, Rear door, 1,500 kg Maintenance, History and Condition APK (Technical Inspection): Valid until 12/2026 Technical condition: Very good Optical condition: Very good Further Information Please contact Thierry Leemans for further information.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons Djdpfxjgv I Ihs Ap Dowc 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: ready for operation (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm Dedpezhnfusfx Ap Dswc 6 hydraulic cylinders safety switch – shear pin press without heating – cold press

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor Dwodpfxed Db N Ij Ap Dsc • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Dwjdjd Nnwlspfx Ap Doc Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. Djded En Ryepfx Ap Djwc We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Dwodpfx Apjfk N Tpj Dec

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Dedpfozmp Nrjx Ap Dowc

Condition: good (used), Year of construction: 1999, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into meat pieces, with and without bones. The MM-26 series is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops) due to its more compact dimensions. The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, unlike modern touchscreen controls, are hardly susceptible to costly electronic damage. Dwodpjz Dtg Hofx Ap Doc Technical data: Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Trade name: MM-26 / Meat Master 26 Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (high voltage) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection/needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, Format: 0x0 Dwedpfx Aeyxqwdop Djc Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table heating plate for preheating glued bindings movable plate heated rounding book block thickness of 8-80 mm book block height max. 520 mm

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Dodpfovxtrxjx Ap Djwc Tool plate dimensions 850x760 mm

Condition: like new (used), Year of construction: 2020, total length: 6,020 mm, Pneumatic automatic press for longitudinal wood gluing, 6 meters, for micro-joints, after complete overhaul Dwodpey E I D Ijfx Ap Dec

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine + Press and Stacking Made in Germany. The world’s highest-class folding machine. Dwodozurz Topfx Ap Djc The machine is ready for production. Infinitely variable feed and folding speed adjustment. 6-cassette module. Vacuum feeding Desta BAS 350 platen press HH 177 stacking delivery This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Maximum format: 350x500mm Weight: 650kg 380V power supply

Condition: used, Year of construction: 2025, Used Machine Year of manufacture: 2025 Condition: like new, delivered in December 2025 Features and Technical Specifications: - Solid worktable made of heavily ribbed gray cast iron for maximum stability and durability - Sturdy base frame made of welded steel—guarantees high torsional rigidity and vibration-free operation - Precision format sliding carriage made of anodized aluminum—smoothly guided by a high-quality ball-contact system - Carbide guideways—for lasting precision and minimal maintenance - Swiveling cast iron saw unit with dual segment guide - Exact zero-point swivel for maximum cutting accuracy - Solid rip fence with round bar guide - Equipped with a sliding eccentric clamping device - Integrated miter cutting device on the sliding carriage—for fast and precise miter cuts - Scoring unit with belt drive - Format sliding table length: 2600 mm - Trimming length: 2600 mm - Format sliding table width: 360 mm - Table length: 940 mm Dedpszk N Txofx Ap Djwc - Table width: 560 mm - Cutting width with rip fence: 900 mm - Max. crosscut width to the left of the saw blade: 3200 mm - Saw blade tilt: 90–46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Speed: 4,000 rpm - Scoring blade diameter: 120 mm - Scoring blade speed: 9,000 rpm - Motor: 6 kW Weight: approx. 560 kg

Condition: used, machine/vehicle number: FDU1308/2161558 001, Gearbox (Servo Motor) Stardrive For Bertolaso Filler/Capper Dedpez Ick Aefx Ap Dewc