Used Seacom Equipment for sale (42,443)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP Kjdpez Ai Tpofx Adlodt - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Throughfeed drying tunnel Kdsdjz Dtyyepfx Adlot Manufacturer: Bürkle Technical data - with UV lamp - Year of manufacture estimated to be around 2000. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2020, condition: new, functionality: fully functional, This new brewery, still wrapped in plastic from the production factory, has been purchased in 2020 but was never installed after planning permission failed by the local government. So, it's a complete set, see details, alle brand new (!) but for a very attractive price. New it will be approx. 640K, this one is for 360.000€. All manuals etc available, as well as a plan for installation with support from manufacturer (separate billing). Kedpfxszz Rbxe Adlodt PLEASE NOTE: WE DO NOT SUPPLY VISA / WE DO NOT PROVIDE SPREAD PAYMENT. We are a brewery, not a trader nor manufacturer.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh sizes of 65 and 5 [mm]. Side tensioning, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a chassis. Upon request, we can manufacture a custom chassis with the included chutes. Ksdpfx Ajz Dkxyodlodt

Condition: good (used), machine/vehicle number: 3248, total length: 1,020 mm, total width: 2,830 mm, Year of construction: 2024, operation weight: 1,100 kg, load capacity: 20,000 kg, Seacom TRESTLE 20T from Uniktruck Kjdjyuh T Hspfx Adljdt

Condition: good (used), machine/vehicle number: 3250, total length: 2,100 mm, total width: 2,050 mm, Year of construction: 2024, operation weight: 2,000 kg, load capacity: 33,000 kg, Seacom KONGETAP ADAPTER from Uniktruck Kdodsyuh Udepfx Adljt

Year of construction: 2010, condition: used, functionality: fully functional, empty load weight: 4,200 kg, total length: 5,400 mm, load capacity: 30,000 kg, construction width: 1,800 mm, Gooseneck Technical condition: normal Kjdpfx Adeyhipvelodt Description: with garage, with parking garage

Condition: good (used), machine/vehicle number: 2868, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kedpfx Aozmy A Asdledt Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2872, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: Cushion Kdodpfx Adszmy Daeljt Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2874, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kjdezmy Dgepfx Adljdt Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2875, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: Cushion Kedpfx Aezmy Dmjdlodt Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2878, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kdodozmy Dyopfx Adlot Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2879, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16 Kdedpezmy D Hjfx Adlot

Condition: good (used), machine/vehicle number: 2877, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kdedpfozmy Dtox Adlet Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2871, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kjdpfxozmy A Nj Adlodt Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2880, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 1,00,000 kg, Seacom RT40-100T from Uniktruck Kdjdpjzmy D Tsfx Adlet Wheel type – Steering wheel: Cushion Wheel size – Steering wheel: 22 x 16 x 16

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, filling weight (max.): 5,00,000 g, stroke rate (min.): 25 1/min, stroke rate (max.): 120 1/min, TECHNICAL DETAILS Molding process: Sliding plate technology Servo-driven molding system Suitable for meat, poultry, and non-meat products Typical throughput: 4,082 kg/h Line width: 660 mm Ksdpfx Ajzzp Sijdljdt Stroke rate: 25–100 strokes/min Stroke rate SX: max. 120 strokes/min Capacity of the filling hopper: 500 kg EQUIPMENT Servo drive Sliding plate molding system Large-volume filling hopper

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Kdsdszy Hx Dspfx Adlet Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Kdjdpjzy Hhxefx Adlst Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, The FABO FTT-100-S Mobile Tertiary Impact Crushing & Screening Plant is a tracked crushing solution designed for producing high-quality fine aggregates and manufactured sand. Combining a high-speed tertiary impact crusher with an integrated vibrating screen, it delivers excellent product shape, high production efficiency, and reliable performance in quarrying, mining, and recycling applications. Equipped with a PLC automation system, hybrid diesel-electric power unit, and heavy-duty tracked chassis, the FTT-100-S offers outstanding mobility, low operating costs, and quick setup on any job site, making it the ideal choice for demanding crushing projects. Technical Specifications Production Capacity: 180–250 T/H Kodpfjzv S U Nox Adlodt Maximum Feed Size: 120 mm Crusher Type: TK-65 Tertiary Impact Crusher Vibrating Screen: 1500 × 4200 mm Drive System: Hybrid Diesel-Electric Mobility: Tracked Chassis FABO – Quality Is Our Soul.

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 46,000 kg, Year of construction: 2026, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! Kdedpfx Adozibdmolot FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: used, Year of construction: 2008, operating hours: 10,000 h, functionality: limited functionality, overall weight: 6,000 kg, rotor diameter: 400 mm, number of blades: 20, total length: 3,500 mm, total height: 2,300 mm, total width: 1,500 mm, rotor width: 1,200 mm, power: 75 kW (101.97 HP), type of input current: DC, rotational speed (max.): 82 rpm, input voltage: 400 V, CMG 1200 shredder for sale. Kedpfjz Ag Hyex Adljdt

Condition: good (used), machine/vehicle number: 3571, total length: 4,900 mm, total width: 4,000 mm, Year of construction: 2021, operation weight: 5,600 kg, load capacity: 80,000 kg, Seacom RT20-80T from Uniktruck Kdodpfx Aozlun Redlot

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. Kjdpfx Ajzx D I Todlodt The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Kdsdpfxoz Dpt As Adlet