Used Simex Sauer Spk 80 for sale (16,770)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned Nodpfxey R Nnfe Aqvjct • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: CW 725 WP, mileage: 8,30,000 km, first registration: 07/2005, fuel type: diesel, maximum load weight: 17,720 kg, overall weight: 32,000 kg, Year of construction: 2005, IVECO truck, black color, with HIAB 220 crane mounted behind the cab, complete with remote control. Fixed-bed body manufactured by PADOVANI. Ncodpfsy Udd Ajx Aqvjt Euro 3 emission standard.

Condition: used, Year of construction: 1983, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 10,000 mm, For sale: PORĘBA TPK-80/10M universal lathe, year of manufacture 1983, in very good technical condition. Availability: in stock, under power, available for inspection and testing at any time. Standard equipment: Tailstock Coolant pump Tool holder Ncjdpfoyxgm Usx Aqvet Additional equipment: 1 x Traveling steady 1 x Steady rest 40–400 mm 1 x Steady rest 400–600 mm 1 x 3-jaw self-centering chuck Ø 500 mm Technical specifications: Distance between centers / turning length: 10,000 mm Swing over bed: 800 mm Swing over carriage: 530 mm Swing in gap: 1080 mm Spindle bore: 95 mm Max. workpiece weight: between centers: 6,000 kg between centers + 1 steady rest: 7,500 kg between centers + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: Longitudinal: 0.1 – 12.8 mm/rev Cross: 0.05 – 6.4 mm/rev Main motor power: 16/22 kW (1st / 2nd gear) Dimensions: Total length: 12,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 11,200 kg

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg Ncjdotqqmbspfx Aqvet NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Nedey Ugv Iepfx Aqvsct

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,150 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 Ncsdpfx Aqoy Rawdjvjt · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,550 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad Ncsdpjy Ravtsfx Aqvot · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: new, 50 mm 8,5 U/min 100 kN Ncsdpsy H N Ikofx Aqvst roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers Ncedpsy H N Hmsfx Aqvjt - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical Nedjy H N Haspfx Aqvoct - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V Nedpfsy Rpdtex Aqvoct • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: Nodpsr D N Eqefx Aqvjct 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Nedpfexyhhasx Aqvsct Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Platform height: 650mm Platform length: 4000mm Platform width: 2000mm Max. loading capacity:60T Nodpfeyh H Sfex Aqvect Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), profile bending machine Ncjdpfxowtph Ds Aqvjt

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width Njdpemb Urdefx Aqvect 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Ncjdpfx Asvn Svuoqvst Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Nodpfx Aey N D E Ajqvjct Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: good (used), functionality: fully functional, power: 36 kW (48.95 HP), fuel type: diesel, empty load weight: 8,373 kg, Year of construction: 2016, operating hours: 8,974 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, onboard computer, rubber tracks, Mini Excavator WACKER NEUSON EC 80 Year: 2016 According to meter: 8,974 operating hours 36.4 kW 8,373 kg - POWERTILT - Hydraulic quick coupler - All hydraulic lines - 3 buckets - Air conditioning - Refueling pump - Reversing camera Immediately ready for use! Nsdpfx Aqsy Hpa Hevect Original paint! Good tracks! Sales price: €34,500 net Affordable delivery available!

Condition: used, Year of construction: 2001, operating hours: 533 h, Type of fuel: Electric Colour: Grey Empty weight: 12.570 kg Dimensions (LxBxH): 385 x 200 x 330 cm Lifting capacity: 8.000 kg Lift height: 408 cm Fork dimensions: 2.400 x 2.430 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: T32207.0234 - Operating hours: 533 - Lifting capacity: 8000kg - Lifting height: 4080mm - Overhead clearance: 3300mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 2430mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Midac - Capacity: 1440Ah - Battery voltage: 80V - Battery test result: 61% - Transport dimensions: 3850mm x 2000mm x 3300mm (l x w x h) - Transport weight [kg]: 12570kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nsdoywuyaopfx Aqvoct Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 670 mm, turning length: 3,000 mm, turning diameter: 800 mm, From stock! Sinumerik 840D sL - brand new Technical data CNC lathe with slant bed type TOK -80 CNC x 3 (from stock) or 4m, offered after general overhaul : Producer : FUM POREBA - year of overahul final stage of overahul - swing over bed 800 mm - swing over carriage 670 mm - turning length 3000 mm (from stock) or 4000 mm - spindle bore 95 mm - main motor 55 kW Ncedpfx Aqsgpg I Rjvst - CNC system Siemens - Sinumerik 840 D sl - brand new - tooling system automatic tool turret 12 positions - max. load capacity b.c. 4500 kg - max. load capacity in the chuck 800 kg - number of speed range 2 - range of revolution 4-800 rpm - tailstock quill Ø 180 mm - quill slide out Ø 150 mm - rapid travel in Z and X axis 5000 mm/min - cross travel 410 mm - longitudinal travel 3000 / lub 4000 mm - overall dimensions of the lathe for 3 m b.c. H - 2900 mm, W - 2705 mm, L - 8135 - mass of the lathe: 24,000 kg / for 3 m turning length

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Ncodpfx Aqey Uhxwevot Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) Ncedsy Uhpvopfx Aqvet - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 7.65 linear meters wide-span shelving, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: - 05 x frames, approx. 200 x 60 cm, disassembled - 32 x beams, approx. 185 cm - 16 x shelf panels, approx. 184.5 x 79.5 cm - 32 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load Nsdpfx Aqoy Uhpcjvjct - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New goods, available from stock - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6/net each. Delivery available on request at competitive rates. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus VAT as required by law. You will receive an invoice with VAT shown separately. Transport: Delivery is performed as requested by our partner shipping company; cost depends on postal code. Assembly: Our trained staff are at your disposal, providing professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Nedpfx Ajy Uhn Eeqvoct -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.