Used Steute Foot Switch for sale (7,922)

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V Hjdpfxeq Ev R Ss Aftjfl - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Hfedpfx Afezx Rvkstel Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm Hfodszwg Tispfx Aftsl - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Hsdszt R D Djpfx Aftefl Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German Hedpfexab I Hox Aftefl including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation Hodpfx Ajxaazleftjfl

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg Hedpfxoy Ddv Rs Aftefl - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Tension banding machine Purpose of the machine The tight banding machines in the SKINETTA series are used to band (wrap) individual products or several individual products tightly with polyethylene film. In contrast to shrinking machines, the wrapping film is pulled tightly around the pack before sealing. This tightening is the main advantage of the process. The result is up to 20% less film consumption. A particular advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosage. The sealing (welding) of the film takes place in a very small space and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heating hood downstream and using a correspondingly wide film, the excess film protruding beyond the container can be shrunk to the side. This process makes the pack even more stable and prevents individual products from falling out of the sides of a grouped pack. Full closure of the packs by sealing, sealing and side folding is possible with appropriate additional equipment. The range of SKINETTA stretch-banding machines comprises 6 basic types for film widths from 25 mm to 200, 290, 440, 590, 790 and 1250 mm. In addition to the single-track version, two to four-track systems are manufactured to increase output. - In the SK series (semi-automatic), the products are grouped on the machine table by an operator. The insertion into the film and the subsequent stretch-banding process is triggered either by a foot switch or a two-hand control, subsequent full automation is possible (except for type SK 200), - In the ASK series (fully automatic), the products are fed, grouped and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with tried and tested standard elements. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 Power requirement: 6.1 kW Additional equipment: Bar chain conveyor Hjdpsp U T Ifsfx Aftjfl Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment Hodjzruf Nepfx Aftefl - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: like new (used), Year of construction: 2020, Power at 50%: 25kVA Short circuit-current: 18kA Electrode force: 240daN Throat depth: 230-550mm --- Weld control: TE101 (13-parameters, 99-program) --- Extra Equipment: - foot pedal - main switch --- Hfedpfxjzgxfie Aftol Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), functionality: fully functional, Capacity 1000 x 3.5 mm - 55 strokes/min - electric foot switch - left side stop 600 mm, two supports of 600 mm each - central lubrication - Ortlinghaus brake-clutch combination Hfedpfjzhgplex Aftol - switchable between high-hold position and tilting roller table - rear safety by light curtain

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Hodpfx Afozkg Rnstofl Transport: ex works

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Usable length: 6200 mm Bending capacity steel 400 N/mm: 2.00 mm Stainless steel 600 N/mm: 1.50 mm Aluminum 190 N/mm: 3.00 mm Number of uprights: 6 Driven bending joints: 6 Insertion depth: 1165 mm Connection: 400V/3Ph/50Hz Other data and dimensions: see brochure Includes hydraulic jaw adjustment to compensate for different sheet thicknesses Includes adjustable jaw preload Includes 2 hydraulic pressure stages Includes safety package Includes 10 x 60 mm, 2-piece bending jaw extension rail Includes 2-way foot switch for clamping jaw open/close + automatic bending jaw start Includes resettable sheet metal grid Includes water groove in the clamping jaw BMS Multi-Touch control with electronic depth stop TAZ 1000 With this Windows-based, graphical touchscreen control, profiles can be selected by simply tapping. The simulation program allows you to observe the complete bending process of a previously saved profile, as well as newly entered profiles. The depth stop is electronically driven via toothed belts and is equipped with four stop fingers. The fingers are infinitely adjustable along the entire machine length. Depth stop measuring range: 10/30 - 945 mm. Network connection for remote maintenance Hjdpfoyxchnex Aftsfl Electric cutting device S2 Cutting capacity: Steel 400 N/mm²: 2.00 mm Stainless steel 600 N/mm²: 1.25 mm Aluminum 190 N/mm²: 2.50 mm Includes optional conical depth stop for narrow/wide edges for easy joining of sheets Measuring range: 10/30 - 885 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs Hedpfxjt Ucgae Aftsfl - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm Hfsdpjhhc Ixefx Aftel - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: used, Year of construction: 2004, gebraucht 2004 9726 prompt, Zwischenverkauf v Türkei 6750 € 1 1350 mm 3 mm 35 1/min 1.5 ° 550 mm 3 kW 2 Stk. 850 mm 400 mm 1700 mm 1350 mm 1200 mm 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Hfodoynmyrspfx Aftjl Details:

Condition: good (used), Year of construction: 1988, functionality: fully functional, For sale is a robust and reliable Scheer DB5 dowel drilling machine / multiple-hole drilling machine for professional use in carpentry workshops, joineries, and in the furniture and interior design industries. Hedszr Egkjpfx Aftefl The machine is ideally suited for precise dowel drilling and multiple-hole drilling in solid wood, chipboard, MDF, and other wood-based materials. Thanks to its robust industrial design, pneumatic workpiece clamping, and precise guide systems, fast, accurate, and consistently repeatable work is possible. The Scheer DB5 impresses with its ease of operation, high precision, and durable construction, making it ideal for daily use in the workshop. Technical data: Manufacturer: Scheer Type: DB5 Year of manufacture: 1988 Voltage: 400 V Pneumatic workpiece clamping Digital dimension display Adjustable stops with central adjustment Includes drill bit Precise linear guides Operation via foot switch Dust extraction connection available Robust steel construction Undercarriage with rollers Application areas: Dowel drilling Multiple-hole drilling Furniture construction Interior design Window and door construction Carpentry Joinery Series production The machine can be inspected and tested under power after prior appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) Hsdpfx Afozlulpotjfl - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: good (used), functionality: fully functional, Weight: 3.5 tons Punching force: 1000 kN Reach: 760 mm Can punch, for example, a 40 mm hole in 22 mm steel Hjdpfx Afsztknpjtsfl Drive power: 8.5 kW Height (approx.): 2.15 m Width x Depth (approx.): 0.8 x 2 m Stroke release via foot switch.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics Hodpsy Samujfx Aftefl - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) Hsdpfx Afozd Hb Hetefl - Transport stand (homemade)

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine Hfedpfxszv Sbij Aftjl - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: like new (used), Year of construction: 2025, operating hours: 650 h, functionality: fully functional, total height: 2,274 mm, total length: 3,061 mm, total width: 2,129 mm, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 3,300 kg, rotational speed (max.): 10,500 rpm, travel distance X-axis: 320 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 470 mm, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 4,000 mm, space requirement height: 3,000 mm, Equipment: rotational speed infinitely variable, WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) GE Fanuc Series 31i - B5 2025 650 working house. Hfedpfxjztti Aj Aftsl please see all information in attached PDF file * Machine Type: WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) * Fire extinguishing system DIMES * Holder for sharpening stones * Tool gripper * Protective and cleaning arbor * Plug gauge * Setting disc * Pull stud * Clamping arbor for hobs (diameter 32 mm) * Clamping arbor for hobs (diameter 40 mm) * Foot operated switch * Keyboard shelf * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=25 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=45 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=85 mm) * Dynamometric Key / torque wrench * Dynamometric Key * Mounting wrench * Sensor * Coolant unit Location in Israel . ready for inspaction . need export license

Condition: excellent (used), Year of construction: 2011, Pad printing machine TIC PCK4PM165PC Inkjet printing machine, floor model, clear display with microprocessor control, electro-pneumatically controlled, with pad displacement, electro-pneumatically controlled, closed ink system, with integrated cleaning station, ink cup ø 140 mm, cliché size WxD: 4 x 150 x 320 mm, height-adjustable cross feed table via spindle, with lateral safety discs as well as emergency/off button and foot switch, required connection: compressed air 6 bar, 230V, 50Hz,pad contact pressure: 270 at 6 bar, second-hand, year of manufacture 2011, good condition. Hfodjua Efnopfx Aftsl

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. Hodpey Raiyjfx Aftofl dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions