The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand whe...
Anodized aluminium sliding table
Large-dimensioned milling unit made of grey cast iron, swivelling up to -45° to the rear
Four milling speeds from 3500 to 10000 min¯¹
Right-left rotation as standard
Display height and inclination 1/10 mm accurate
Powerful 5.0 kW industrial motor
Length approx. 1200 mm
width/depth approx. 1400
Weight approx. 510 kg
Suction connection 2 x 120 mm
Table height 900 mm
sliding carriage length 1200 mm
Sliding carriage width 360 mm
used, good condition
manufactured by Bäuerle
motor 3 / 4 kW
motor 2 revs/motor pole switch
6 speed steps 2800, 4500, 5600, 6000, 9000, 12000
right hand-left hand rotation
table size 1100 mm x 1000 mm
DBG Patent-stopp jaws
cutter fence with fine adjustment
exhaust connection D 120 mm
required space ca. 1200 mm x 1000 mm x 1300 mm
weight ca. 900 kg
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen, function ch...
spindle moulder with tillable spindle
guaranteed quality at your finger tips - easy-to-use
the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine.
spindle speed readout via LED's
left right turning of spindle
spindle moulder fence with manual adjustment
machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button
carriage on work table for tenoning wo...
- Tenoning/slotting machine with 2 spindles in right version.
- spindle arrangement:
- sawing spindle with HM saw blade Ø 450 mm, cutting height 160 mm, 4 hp/3 kW
- vertical spindle Ø 40 x 170 mm clamping height, 7,5 PS/5,5 kW
- Spindle adjustments readable with SIKO counter at the front of the machine
- With inclinable extendable fence linear L=1.950, extendable up to 3.900 mm, incl. folding fence and workpiece support
- Quick change system for counter wood
With 3 roller feed,
Table size: 1100 x 900 mm
table height: 850 mm
vert. Adjustment of spindle: 185 mm
spindle diameter: 30 mm
5 spindle speeds: 2900-4400-6000-7800-10000 rpm.
max. diameter of tenon cutting wheel up to: 400 mm
drive power: 7,5 PS
weight: net 610 kg
outer dimensions approx.: 1120 x 900 x 850 mm
manufactured by Frommia
type FS 60
built in 1973
Masch.-No. 3 / 22
motor 1,5 / 2,2 kW
with postformer 2,8 kW
2 revs 1200 / 1800 U/min
table size 750 x 750
stand range 600 mm
Collet chuck with collets 16 mm
required space ca. 1200 mm x 1200 mm x 1600 mm
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
work table dimensions 2500 x 780 mm
spindle DM 30 mm
tilting of spindle +/- 45,50
usable spindle lenght 140 mm
Max. tool DM under table 300 x 80 mm
suction DM 1 x 120 & 2 x 100 mm
motor elektrospindel 7,50 kW
elektro spindel with inverter for speed 900 to 12.000 RPM
control panel with mit "Easy Touch 7" program
"Flex"- fence with autom. adjustment via 'Easy Touch 7'
left right turning of spindle
table elongation front
INCL. feeder unit
FELDER Vario 4
variable feed spe...
Spindle travel mm 200
tool flight circle max mm 250
spindle length mm 200
spindle diameter mm 40
Profile depth max mm 65
Main motor kW 7.5
Further technical data
table length mm 650
table width mm 350
Workpiece thickness max mm 110
Speed rpm 4300
Feed max m/min 3.75
Weight approx. kg 400
- NEW -
Type M Base 3
- stepless speed control v. 8000-25000U / min
- Control electronics prevent speed fluctuations
- Overload protection and PTC thermal monitoring
- robust and highly loadable engine with 1050 W
for industrial use
- Made in Germany
- Soft start and start current limiter
- Voltage 230 V
- Milling spindle with 22 mm diameter and counter-
continuous return thread for dirt protection,
precise double bearing for highly accurat...
combined dovetail routing / drilling machine for the simultaneous processing of two frame corner parts per cycle up to dovetails and 2 dowel connections per corner
working capacity up to 60 cycles/h
workpiece height 10 - 120 mm,
work piece width min. 10 mm
2 x milling cutters, motor 530 Watt (chock for HOFFMANN dovetail tool seize W1 – W3)
2 x drilling aggregate, horizontal, motor 2,2 kW, shaft DM 8 mm
2 x drilling aggregate vertical, motor 1050 Watt, shaft DM 8...
Year of manufacture: 1987
Condition: well maintained
table size 1100 x 760 mm
motor 4,7/5,7 kW pole-changing
with right/left rotation
Milling arbor MK 5/ 30 mm
Height and swivel adjustment by means of hand wheel
speeds 3000/4500/6000/9000 rpm
Swivel range of the milling arbor - 5 to + 45 °.
Milling flange with metal jaws
mounted on round insert plate and thus rotatable by 360
with table extension on both sides with extendable frame support
with feeding device
manufactured by Ruwi
type M Basis 3
- infinitely variable rotation speed control v. 8000 - 25000U/min
- Regelelektronik verhindert Drehzahlschwankungen
- Überlastschutz and PTC-Thermo-Überwachung
- robuster and hochbelastbarer motor with 1050 W
for den industriellen Dauereinsatz
- Made in Germany
- Sanftanlon and Anlaufstrombegrenzung
- clamping 230 V
- milling spindle with 22 mm diameter and gegen-
läufigem Rückfördergewinde zur Schmutzabwehr,
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.