Used Transmanut Transversal Occ for sale (993)

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Iiodpfjxnzlhox Agyeh Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section Iiodpfexlrd Nsx Agyeh - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: used, mileage: 1,82,280 km, power: 110 kW (149.56 HP), first registration: 02/2005, fuel type: diesel, empty load weight: 4,760 kg, maximum load weight: 2,730 kg, overall weight: 7,490 kg, tire size: 225/75R17.5, axle configuration: 4x2, wheelbase: 3,350 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration number house, 1x air seat, rear window, electric mirrors, heated mirrors, cruise control, switch 6, ABS (anti-lock braking system), power take-off, differential lock, fog lights, driving lights, work lights, rotating beacon, leaf suspension, trailer coupling ball head, low-noise G1, winter service equipment, U-protection, lateral aluminum driving protection, hydr. transverse locking, roof hatch, yellow environmental badge Wheelbase: 3350 mm Body: 4t Hyva ARK 4-33 S city roll-off system for city containers up to 4m Gearbox ZF 6 S 850! Iisdpovhmb Eofx Agysh Roller height approx. 1200mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2026, functionality: fully functional, Cross table with precisely ground cast iron work surface. Equipped with T-slots which allow for workpiece fixture. Intended for processing, milling and drilling while preserving high precision due to a very accurate 0.02 mm vernier. Technical data Vice size 125 mm Iiedsvu Tnxopfx Agyjh Base size 200×270 mm Table size 475×154 mm Transverse feed 150 mm Longitudinal feed 320 mm Vernier 0.02 mm Groove width 16 mm Screw spacing 175 mm Total dimensions 772×440×180 mm Weight 28 kg

Condition: used, mileage: 26,000 km, power: 85 kW (115.57 HP), first registration: 09/2015, fuel type: diesel, overall weight: 3,499 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Food truck / mobile sales unit, Iveco Daily HiMatic, 26,000 km Net selling price: €24,900 Base vehicle: IVECO DAILY HiMatic Registered: 09/2015 Mileage: 26,000 km MOT/Inspection: NEW Emission class: EURO 5 Transmission: Automatic (8-speed) Wheels: Grey powder-coated Floor: PVC Further equipment and detailed specifications can be found below! The vehicle was converted by a renowned workshop that has specialized in food truck conversions for over 10 years. Come and see the quality of the conversion for yourself! You are welcome to visit us in person during our opening hours for a no-obligation viewing. For questions: Christian Hirsch Please try again later as we are often in a customer meeting. You can find more food trucks here: ----More offers can be found here. Please do not send emails / no emails, as we can only process them sporadically due to time constraints. Thank you for your understanding!---- - Transmission: Automatic - Hi-Matic (8-speed) - ECO mode - Air suspension - Camera / parking assistance - On-board computer - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Electric windows - LED interior lighting with motion detector - Folding shelves - Sliding door from driver's cab to loading area - Box interior: Width: 206cm, Height: 210cm, Length: 435cm - Driver's seat: Height adjustable - Passenger seat: Folding Special equipment: - Long exterior mirrors, for vehicle width 2350 mm - Deletion of passenger double seat - Vehicle key with remote control - Generator 180 A - Front mud flaps - Central locking with preparation for door in superstructure - Airbag, driver's side - Trailer socket preparation - Anti-slip regulation (ASR) - Version: S-series - Exterior mirrors, electrically adjustable and heated - Brake assistant - Electronic brake force distribution - Rear axle suspension: Parabolic / Air - Front axle suspension: Transverse leaf spring - Windscreen and side windows tinted - Transmission: Automatic - Hi-Matic (8-speed) - Body/Superstructure: Box, Krone - Instrument cluster with pixel matrix display - Fuel tank: 70 liters - Headlamp level adjustment - Engine 2.3 L - 85 kW - Diesel - Radio preparation with speakers - Wheelbase 3750 mm - Seats in the cab: Passenger double seat with headrests - Maintenance indicator - Permissible total weight 3.50 t For questions: Christian Hirsch: ---- Iiodpfewicigex Agyjh More offers can be found here. The equipment was determined with the help of a VIN query; technical errors may occur. Information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale are reserved.

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit Isdowuu Ryepfx Agyoih - Bar loader : IEMCA PRA 52F / 33

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 Iisdpfx Aowuu R Hogyjh * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Cooling unit - Bar loader : IEMCA PRA 52F / 33

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  - Capacity: 1,500 – 2,500 crates/h (adjustable) - Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h - Crates in machine: 48 pieces - Crate format: customizable - Running direction: transverse - Spray pressure: approx. 4.0 bar - Lye tank volume: approx. 1.0 m³ - Treatment section length: approx. 34 meters - Main pump: 15 kW, 80 m³/h - Drive units: - Main drive: 0.33 kW - Crate infeed: 0.55 kW - Crate outfeed: 0.55 kW - Dimensions: Iodpfswu S Susx Agyeih - Length: 3,000 mm - Width: 2,000 mm - Height: approx. 5,000 mm - Crate infeed height: 1,100 mm - Crate outfeed height: 4,100 mm - Weight: approx. 1,500 kg - Water connections: - Cleaning water inlet: R 1 1/4” - Rinsing connection: R 3/4” - Construction: stainless steel (except drives) - Control system: LOGO controller - Electrical installation: per customer specification Scope of Delivery  - Spiral crate washer (upper unit) - Lower tank body

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Crosses slides, in position : 1,2,4,5 - Max. travel of transverse slides : 28 [mm] - Max. travel of crossed slides : 45 [mm] - Max. travel of front spindles : 63 [mm] SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 400 - 6000 [rpm] - Spindle power : 15 [kW] POWER SUPPLY Iiodpfxswvvrho Agyoh - Supply voltage : 400 [V] - Total installed power : 31 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.300 [mm] - Machine height : 2.100 [mm] - Machine weight : 4400 [kg] EQUIPMENT - Double mechanical cut and return slide, in position : 6 - Rotary front spindles, in position : 1,2,3,4,5 - Parts catcher - Parts conveying strip - Bar waste chute - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/33/P - Bar holder and stand - Bar holder housing

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed Ijdovxth Hepfx Agyoih 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: ready for operation (used), Type RU 991 Longitudinal stroke 4500 mm Transverse stroke 1000 mm Iiedpfx Aevn Tc Ajgyjh Vertical stroke 1000 mm Table dimension 6155x1000 mm Spindle speed 15 - 1500 rpm (RPM) Dimensions 6400 x 2400 x 2600 Weight 18T

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor Iedpsvr Eh Eofx Agyeih • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. without using a tray or a pad. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(110-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L8345xW1460xH2400mm; weight: 5000kg; power: 380V; 6kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 60 liter/min, 6bar. Isdjv Nl Rzepfx Agysih Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Wagon Transport                                 Approval          Technical 1 Speed:      80 km/h                65 km/h Fifth wheel load:                23,000 kg              26,000 kg Rear axle load:        10,000 kg              11,000 kg Total weight:      83,000 kg              92,000 kg Payload:                  52,500 kg              61,500 kg Tare weight: (without accessories):          30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: angled 10 degrees Front corners: angled 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical drop-side supports and hydraulic lowering cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Liftable: no Length: 13,000 mm Width: 3,000 mm Decking: Sheet metal/Spruce 50 mm Wheel recesses: no Extensions: no Extendable: single telescopic Length1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Telescopic loading platform, designed as an outer and inner tube structure, with a 1,070 mm long, fixed loading platform section at the front. Integrated bolt-on coupling in the fixed loading platform section for connecting tank bridge extension beams; the welded track rails serve as a rail track in the track gauges of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by means of spring accumulators and conical bushings Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear axle: Axle design: Standard Loading height, loaded: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Decking: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Axles: Number of axles: 6 Lift axle: see accessories Axle type: Steered stub axles Axle equalization: hydraulic Axle manufacturer: BPW/Eco Operating positions: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raising/lowering valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steered axles: 6 Steered axle arrangement: all steered Maximum steering angle: 45° Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: According to EU standard: Yes ABS: Yes ALB: Yes EBS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis note: Steering designed for the extended state with a larger steering angle of the front axles Iijdpfx Aeyfvf Ssgyoh Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers, see accessories below) Control elements protected on the left in the direction of travel...

Condition: refurbished (used), Electronic clamp with electronic opening and closing. With electronic reading of longitudinal and transverse sections. Iiedpfxoyf D Dvo Agyjh

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,250 mm, brakes: constant throttle, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, Kz. Haus, 1 air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, automatic transmission, differential lock, fog lights, leaf-air suspension, air and light connections for trailer hitch, aluminum tank, 2-axle front-wheel steering, hydraulic transverse locking, green environmental badge. Wheelbase: 4250 mm, Body: 26t Hyva T26-55-S roll-off system for containers from 4.3m to 6.6m, frame height approx. 1160mm! Frame length approx. 6200mm! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Kroatien Isdpfsxb Ek Iox Agyoih ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) Iijdpfxjf Sqffe Agysh - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Iodpfxsf Um Ras Agyeih Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe Ijdpfx Agjgr Er Seyeih engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: new, ROGI surface grinder, type FSG-4080A Table dimensions ----- 406 x 813 mm Longitudinal travel of the work table ----- 900 mm Transverse travel of the work table ----- 450 mm Overhang ----- 580 mm Max. permissible workpiece weight ----- 500 kg Grinding wheel ----- 350×40×127 mm Motor ----- 4 kW Weight ----- 3400 kg Machine dimensions ----- 3600×2630 mm Isdpfega T Iaex Agyeih

Condition: as good as new (ex-display), Available in various designs, such as round, hexagonal, or square, and in smooth, cross-ribbed, or with longitudinal and transverse ribs. You can find an up-to-date list of available new and like-new SK32/SK42/SK52/SK65/SK80/SK100 chucks on our website. Iodpfeh Dmamjx Agyeih We look forward to receiving your inquiry. STALEX Werkzeugmaschinen GmbH

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Iodpfx Agjkkcm Ueyoih Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. Iodpfjrzhfpex Agyeih * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: new, Year of construction: 2026, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Max Speed Axis 1 70°/sec Flange diameter 400 mm Iijdpfx Aeh Imyajgyjh ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. Ijdjh I Nw Dspfx Agysih The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days