Used Transnorm Gkf 180°-750-550 Ir1000 for sale (12,818)

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow Guodpfjziiwusx Ag Sjh   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Gsdpfx Aeziyx Neg Souh Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermotron Type: Thermotron SE-1000-5-5 Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C Overall dimensions - WxDxH: 122 x 188 x 218 centimeters Guedpfx Ajzd R S Njg Soh Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1997, condition: excellent (used), Safety workbench Manufacturer: WIBO Weiss Type: Jekt TCRJO 180/98 with stepped design made of stainless steel Work area: Depth: 920 mm Height: 1200 mm Width: 1800 mm Gusdpehk St Asfx Ag Ssh Working height: 600 mm Overall dimensions: Depth: 1080 mm Height: 2100 mm Height with dust extraction: 2550 mm Width: 1800 mm

Condition: new, HEMA RotoClamp RC 180 NA, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Guedpsi Ea Hysfx Ag Ssh

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Godpfot I E T Ajx Ag Souh

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm Gjdpfjrfd Thjx Ag Souh tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Guodpeph U Ayofx Ag Seh Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, roll diameter: 50 mm, roll width: 310 mm, power: 0.37 kW (0.50 HP), input voltage: 380 V, type of input current: three-phase, overall weight: 120 kg, Manufacturer: KNAPP Guodpfx Ajwynwdsg Soh Track width: 315mm / total width: 385 mm Roller width: 310mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame Inner curve length: 1400 mm Outer curve length: 2450 mm Inner track distance: 625 mm Total diameter: 1380 mm SEW Eurodrive drive. Power: 0.25kW, speed: 39m/min

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Guedpfxev A Rppj Ag Ssh Hollow shaft or hole 110mm

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Gsdezbk Iyopfx Ag Sjuh Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: new, length 1500 x 740 x 780 innen mm Gsdexab Imspfx Ag Souh weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: used, Year of construction: 2024, total length: 7,790 mm, · Arbeitshöhe 18.19 m · Plattformhöhe 16.19 m · Maximale seitliche Reichweite 10.51 m · Ãoeberhang / Knickpunkt Gelenk 7.55 m · Korbarm-Drehwinkel (Boden) +-59.50 ° · Tragfähigkeit des Arbeitskorbs 230 kg · Drehung des Oberwagens 350 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 · Gegengewicht Versatz (Oberwagen bei 90°) 0.22 m · Innerer Wenderadius 1.38 m · äußerer Wenderadius 3.75 m · Fahrgeschwindigkeit - Transportmodus 5 km/h · Fahrgeschwindigkeit - Arbeitsmodus 1 km/h · Steigfähigkeit 45 % · Zulässige Neigung im Arbeitsmodus 5 ° · Bereifung Schaumgefüllt · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · Hersteller / Motor Modell: Kubota - D1105-E4B Guedpfsx Avvkex Ag Soh · Motornorm: Vorläufige Stufe 4, Stage IIIA, Stage V · Nennleistung Verbrennungsmotor / Leistung (kW): 24.80 p / 18.50 kW · Bodendruck 10 dan/cm2 · Hydraulikdruck 340 bar · Fassungsvermögen des Hydrauliktanks 54 l · Fassungsvermögen des Kraftstofftanks 52 l · Schwingungsbelastung Hand/Arm < 0 m/s² · Täglicher Verbrauch 4.26 l · Diese Maschine entspricht: Europäische Richtlinien: 2006/42/EG - Maschinen(Neufassung EN 280:2013) - 2004/108/EG (EMV) -2006/95/EG (Niederspannung)

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Gusdpfx Asxp I D Tjg Sjh Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: used, This listing is for a Enviro Systems UVIC-750 Guedpfxoxzhu Aj Ag Seh

Condition: used, mileage: 5,766 km, power: 132 kW (179.47 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Rear wing doors (opening angle 260 / 270 degrees) Full-size spare wheel (incl. spare wheel holder) Gusdpfxex Hm Sgo Ag Seh Techno-Plus Package Visibility Package Tow bar preparation Additional equipment: Passenger airbag, driver airbag, trailer stability program, traction control system (ASR), electrically adjustable and heated exterior mirrors, extended exterior mirrors for vehicle width 2200 mm, black box (Event Data Recorder, EDR), brake assist, roof antenna, Eco package, electronic parking aid, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assistant, driver assistance system: drowsiness detection, driver assistance system: emergency brake assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, driver assistance system: lane keeping assist incl. traffic sign recognition, driver assistance system: rollover protection, 180 A alternator, cruise control incl. speed limiter, 8-speed automatic transmission, glovebox with cooling function, rear wing doors without glazing, infotainment system with 5" color display, DAB and Bluetooth interface, body/build: high-roof panel van standard, fuel tank: 90 liters, black radiator grille, cargo area partition wall, model update (2), engine 2.2 l - 132 kW Multijet Power turbodiesel, wheelbase 3450 mm, tire repair kit, tire pressure monitoring system, rear acoustic warning device (external warning signal), low emissions according to Euro 6e, halogen headlights, right sliding side door (cargo/passenger compartment), seat upholstery: fabric, cab seats: double passenger seat, cab seats: driver’s seat with armrest and lumbar support, engine start/stop system, rear-view telecamera, UConnect Box telematics system, permissible gross vehicle weight 3.50 t

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 106340 € 2009.83 € 150 mm 1000 mm 1900 mm 1475 mm 2700 kg 170 cm³ 150 x 7,1 mm 6" x 7,11 mm 150 x 9 mm 141,3 x 6,55 mm 141,3 x 6,55 mm 168,3 x 9 mm 168,3 x 9 mm 64 x 6 mm 88,9 x 3,65 mm 110 mm Guodpfxsynmtls Ag Ssh 150 x 45 stehend, 150 x 6 mm 800 mm 100 mm 10 mm 1 U/min 15 kW TCPlus Control with 7“ Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul

Condition: new, mileage: 50 km, fuel type: diesel, empty load weight: 2,540 kg, overall weight: 4,200 kg, tire size: 205/75 R17,5, axle configuration: 2 axles, wheelbase: 4,100 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, | Iveco Daily chassis, NEW VEHICLE!! | Automatic transmission installed, EURO 6 | Twin tires | Air suspension on the rear axle | Air conditioning, power windows, power mirrors with heating | Radio/CD, sunroof, spare wheel holder | Frame length: 4.20 m | Wheelbase: 4100 mm, also available with 3750 mm | Digital tachograph, rearview camera | Equipment list available upon request | Subject to errors, typos, and prior sale. Gedpfoy Niylsx Ag Souh

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology Gujdpfx Agoy Alcio Sjh • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 320 kg, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH MTP UNIVERSAL LATHE 330 × 750 – 400 V / 230 V – 1.1 KW A professional universal lathe for precision machining of metal components, suited to workshops, production facilities, tool rooms and maintenance departments. Both the 400 V and 230 V versions are in stock, so the machine can be connected to the power supply already available in your facility. The lathe handles shafts, tapers and other rotational parts, and cuts both metric and imperial threads. Its rigid construction, wide spindle speed range and comprehensive standard equipment ensure accurate, versatile and comfortable operation. TECHNICAL DATA • Swing over bed: 330 mm • Maximum workpiece length: 750 mm • Swing over cross slide: 220 mm • Chuck: Ø160 mm • Spindle bore: 38 mm • Spindle taper: MT5 • Metric threads: 20 pitches, 0.5–4 mm • Imperial threads: 9–40 TPI • Longitudinal feed: 0.135–1.80 mm/rev • Tailstock quill: 70 mm travel, MT3 • Spindle speeds: 12 (60–1650 rpm) • Motor power: 1.1 kW (both versions) • Power supply: 400 V or 230 V (specify when ordering) • Dimensions (L × W × H): 1330 × 750 × 700 mm • Weight: 320 kg STANDARD EQUIPMENT • 3-jaw chuck Ø160 mm • Cooling system • MT3 dead centre Guedpsyvfzqofx Ag Soh • Lathe stand • Change gears for thread cutting • Work light OPTIONAL EQUIPMENT • 2-axis Digital Readout (DRO) DELIVERY THROUGHOUT EUROPE We arrange transport to any destination in Poland and across Europe. Delivery costs are calculated individually; please send us your postcode and city for a transport quotation. Contact us for pricing and availability. We also invite you to explore the other machines in the Metal Technics Polska range.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 180 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK MH 7P - 180/1260 FA HOT WATER WASHER NEW HEATING BOILER Manufactured in 2017 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. Gsdpfjymmgcex Ag Ssuh TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Flow rate [l/h]: 1170 Max pumping capacity [l/h]: 1260 Working pressure [bar]: 180 Maximum pressure [bar]: 250 Max. Heating temperature [°C]: 90-150 Connection power [kW]: 7.6 Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 195 EQUIPMENT: NEW HEATING BOILER NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Gedpfxowqw Tpo Ag Ssuh Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m Guodeu Idmvjpfx Ag Soh dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: new, width 800 mm depth 380 mm height 1800 mm weight 70 Kg Cabinet with 4 shelves. Maximum load per shelf 40 kg. Color code 7035. Gusdpfxou Immle Ag Seh Weight 75kg.

Condition: good (used), X 800 mm Gjdpfjwa Naaex Ag Seuh Y 400 mm Z 500 mm