Used Trumpf Trumabend V 230 for sale (36,904)

Condition: ready for operation (used), Siemens 1FK7042-5AF71-1EG5 synchronous servo motor, serial number: YFR123002201017, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Isdpfx Akoi D Rhcewoid

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Iodpfxjy Sgmnj Akwsid

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, Simple laser tube cutting – reliable, versatile, and profitable. Economical laser cutting of tubes up to 170 mm outer diameter, even with low utilization rates. Whether you want to insource quality, manufacture in a more flexible and faster manner, or tap into new customers and markets: the TruLaser Tube 3000 is your machine, and thanks to its easy operation, it is also ideal for beginners or as an additional machine. Included: Tube support (raw material) with automatically retractable tube supports Solid-state laser TruFiber 3001 Machine bed for 6.5 m raw material length Unloading station for 3 m finished part length (including scrap container) LoadMaster Tube for 6.5 m raw material length (including bundle trough) for automated loading Optional extensions: Machine bed for 8.0 m raw material length for loading and unloading Technology packages for bevel cutting, Rapid Cut, and reduction of spatter adhesion (Spatter Guard) Weld seam detection (SeamLine) inside and outside Highly innovative and user-friendly TRUMPF programming with Programming Tube Service: Installation, commissioning, training 12 months warranty Remote service agreement in the first year TRUMPF quality Our fast remote service support takes care of your needs worldwide. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design and implementation of many thousands of sheet metal fabrication projects, particularly in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, as well as experts in software, automation, and smart factories, you will always receive a customized offer that is tailored to your requirements. P.S.: We will also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with both financial and entrepreneurial challenges. Iijdpfszi Rc Ejx Akwjd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode Ijdpfezix Upex Akweid - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Isdpfx Akezil Dkowoid Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Iodjzilz Aspfx Akwjid Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Pressing force: 170 t Bending length: 3550 mm Iijdpozh Ur Uefx Akwjd Control system: ModEva 12 S Oil capacity: 350 l Total power requirement: 26 kW Machine weight (approx.): 16,500 kg

Condition: used, Year of construction: 2011, Fully functional Isdpfxozd Tlro Akwjid

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Iodpfx Aeziyaaokweid Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) Ijdpfszix U Aex Akwoid (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. Iodpfx Aksyhnukjwsid This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: Iiodsyga Ugspfx Akwod • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swinging diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2000 rpm Iedpoir Igwjfx Akwoid Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed drive - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard - 3-jaw chuck - 4-way tool holder - Foot pedal with mechanical braking device - Coolant system - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment in accordance with CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix Also available as a geared version.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force Iiedpfx Aoy Sak Tokwod - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Iijdezlhcnopfx Akwod Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Iiedpjl R Hz Sefx Akwsd Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator Iedsl R Hy Aepfx Akwoid The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: excellent (used), The machine jack was rarely used and served as a backup. The last inspection by GKS was in November 2022; prior to that, it was inspected annually by GKS in Fellbach. I have checked the jack for functionality, and it is working perfectly. Sold by a private individual, no guarantee or returns. Iodpjzmdr Ijfx Akwoid Due to its weight of 53 kg and the fact that it cannot be transported in a lying position, I would prefer to sell it to someone who can pick it up in person. Shipping is only possible in exceptional cases after consultation and at your own risk!!!

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Easier and more efficient entry into automated welding Automated arc welding cell for small and medium production runs – easy to operate and highly productive The welding cell impresses with its particularly simple operation and programming. With minimal training required, you can put the machine into operation, program it, and operate it; video tutorials are sufficient. Depending on the component and batch size, you can use the welding cell in a 1- or 2-station operation. For example, you can process either a larger component or smaller components in larger series in parallel. You will receive the system without a safety enclosure or as a fully equipped machine tool, TÜV-tested and with CE certification. This also includes extraction, an enclosure with glare protection, and safety technology according to TRUMPF standards. Technical details + equipment: Base model price from: €103,800 (without safety enclosure) Includes: 6-axis, collaborative industrial robot arm for easy programming Teach pendant with graphical user interface on a 12" touchscreen TRUMPF operating plugin for welding with predefined welding parameters for easy, direct programming on the robot Training & Services: Operator course Installation course Iedpfx Aozh I Hxjkweid 12 months warranty Remote service agreement in the first year TRUMPF quality All over the world, our fast remote service support takes care of your needs. You can find more technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design of many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts in software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We would also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with financial and entrepreneurial challenges.

Condition: good (used), Year of construction: 2006, functionality: fully functional, For sale is a TRUMPF TruMatic 1000 Rotation, a compact and economical CNC punching machine for the precise processing of sheet metal. Thanks to the proven TRUMPF rotation technology, all rotating tools can be positioned continuously. This allows for the efficient and highly precise production of complex contours, elongated holes, cutouts, and forming operations. The machine is ideally suited for use in metal construction, switchgear and control cabinet construction, ventilation technology, general mechanical engineering, and contract manufacturing companies. Technical data: Manufacturer: TRUMPF Model: TruMatic 1000 Rotation Control: TRUMPF CNC control Working area: up to 2,500 × 1,250 mm Maximum sheet metal thickness: up to 6.4 mm (material-dependent) Maximum punching force: 165 kN (16.5 t) Tool rotation: 360° CNC-controlled High positioning accuracy Automatic tool changer Programmable tool rotation Power connection: 400 V / 50 Hz Ijdezl Adgopfx Akwoid The TruMatic 1000 is characterized by its compact design, high process reliability, and versatile tool technology. In addition to punching, threading, beading, embossing, forming, and cutouts can be performed, depending on the tool configuration. Equipment: CNC-controlled tool rotation Automatic tool changer TRUMPF tool system High repeatability Programmable tool holder Brush table Hydraulic punching drive Control panel with TRUMPF control Documentation (if available) Condition: Used Technically functional Inspection under power is possible by appointment. Sale due to plant restructuring or inventory change. Scope of delivery: TRUMPF TruMatic 1000 Rotation Existing tools (upon agreement) Documentation and accessories as per inspection Application areas: Metal construction Sheet metal processing Switchgear and control cabinet construction Ventilation and air conditioning technology Mechanical engineering Contract manufacturing Series and small series production Location: Riesa - Germany Inspection / Loading: An inspection of the machine under power is possible at any time by appointment and is expressly desired. If desired, we can assist with: Disassembly Loading Transport organization within Germany and Europe. Errors, changes, and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,423 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This 8-axis TRUMPF TruBend 7036 was manufactured in 2009. It features a press force of 360 kN and a bending length of 1,020 mm, making it suitable for various bending applications. The machine is equipped with a 6-axis CNC backgauge and a user-friendly 15" touch screen control. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7036 press brake we have for sale. Contact us for further details. Ijdpfx Akozicuyoweid

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,932 h, pressing force: 87 t, stroke length: 445 mm, total width: 1,800 mm, total height: 2,840 mm, overall weight: 7,800 kg, travel distance X-axis: 600 mm, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 7, This 7-axis TRUMPF TruBend 5085 was manufactured in 2008. It features a press force of 850 kN and a bending length of 2,210 mm. The machine includes a 5-axis CNC backgauge with an X-axis travel of approximately 600 mm and an R-axis travel of around 250 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5085 CNC hydraulic press brake we have for sale. Contact us for further details. • CE marking: Yes • Distance between columns: approx. 1,750 mm • Throat depth: approx. 420 mm • Open height: approx. 385 mm • Operating pressure: 300 bar • CNC control: TRUMPF CNC control / TASC 6000 • Backgauge: 5-axis CNC backgauge • Axes: X, X5, R, Z1, Z2 • X-axis travel: approx. 600 mm • R-axis travel: approx. 250 mm • Tooling/clamping: WILA hydraulic upper and lower tool clamping; Tooling system: WILA • Axis speeds: • Y-axis rapid: approx. 220 mm/s • Y-axis working: up to approx. 25 mm/s • Y-axis return: approx. 220 mm/s • X-axis: approx. 1,000–1,750 mm/s • R-axis: approx. 330 mm/s • Z-axis: approx. 1,750–2,500 mm/s • Ram/beam working hours: 1,932.8 h • Electrical: • Supply voltage: 3 × 400 V • Frequency: 50 Hz • Nominal current: 24.0 A • Connected load: 17.0 kVA • Control voltage: 24 V DC • Pneumatics: Compressed air connection 6 bar • Safety: • Stopping time: max. 95 ms • Stopping distance at 220 mm/s: max. 10 mm • Stopping distance at 160 mm/s: max. 8.5 mm Isdpezib I Sjfx Akwsid • Minimum safety distance: 190 mm Technical Specification Bending Length 2210 mm

Condition: used, Trumpf Iiedpfx Aezii Nqjkwod TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Iedpfx Aszii D Iekwjid Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser source with KLH cooler The Trumpf TruDisk 4002 laser source is an industrial disc laser from TRUMPF, characterized by high power, beam quality, and efficiency. It is often used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of laser source with associated cooler, but without optics and fiber optic cable. Technical data Laser power: 4,000 watts (4 kW) (minimum 80 W) Iiedpfx Akoziivkjwsd Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm·mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10 % ... 460 V +10 %, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical characteristics: Water-water cooling Precise temperature control (typically 20–25 °C) Refrigerant: R 404A Can be controlled via TRUMPF interface Necessary to meet laser specifications Device type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.