Used Unbekannt 0-16 Bar for sale (98,034)

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available Godpfx Aleq Exi Njbeuc -Price: per set -Total dimensions: 55/48/H40 mm -Total weight: 0.5 kg/set

Condition: used, Vernier caliper, caliper, caliper -Caliper: Vernier caliper measuring range 0-630 mm Guedsg Si Nzopfx Albec -Nonius: 0.05 mm -Dimension: 745/190 / H10 mm -Weight: 1.3 kg

Condition: good (used), Vernier caliper, caliper, vernier caliper Gedpfx Aljwwhmyebeuc -Caliper: Vernier caliper with fine adjustment -Measuring range: 0-1000 mm -Measuring accuracy: 0.1 mm -Dimensions: 1180/225/H15 mm -Weight: 2.5 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo techn. drawing -Total dimensions: 51/48/H45 mm -Total weight: 0,5 kg Gujdoq Exkmepfx Albec

Condition: used, Micrometer screw, outside micrometer screw, precision micrometer screw -Micrometer: Precision micrometer screw -Measuring range: 0-25 mm -Reading: 0.01 mm Gujdpfx Alot Sbbkjbec -Locking device -other sizes: also available -Dimensions box: 165/80/H30 mm -Weight: 0.3 kg

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm Godpfoirukusx Albeuc -Weight: 1.3 kg

Condition: good (used), Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² Gujdpfx Alew Adkrsbec -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard Gujdpfx Aljrhmnwobec -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder -Cable clamps: cable holder -Type: Round 16-25 mm Godpfx Alewqnbwebsuc -Number: 16x holders available -Price: per piece, minimum order 5 pieces -Dimensions: 50/50/63 mm -Weight: 0.1 kg/piece

Condition: good (used), Depth gauge, dial gauge, depth gauge, depth caliper, caliper, caliper, depth micrometer, depth screw -Depth measuring screw: Depth micrometer measuring range: 0-150 mm -Reading accuracy: 0.01 mm Gujdpfxok H R Hbj Albsc -Fine-tuning -Box dimensions: 260/155/H35 mm -Weight: 0.8 kg

Condition: good (used), Socket distribution box, construction site power distribution box, connection cabinet, power distribution box, moisture-proof distribution box, wall-mounted distribution box, high-voltage distribution box, electrical connection box -Power distribution: wall-mounted distribution box, electrical connection box -RCD: 25 / 63 A -Sockets: 1x 63A, 2x 32A, 1x 16A, 2x 220V Gusdpfxehiny Dj Alboc -Individual components: see photos -Overall dimensions: 300/250/H900 mm -Weight: 12 kg

Condition: good (used), Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Adapter sleeves: 15 pieces, with storage box -Sizes: Ø 4-16 mm, see photos -Sale: only for sale as a whole -Dimension box: 115/195/H50 mm -Weight: 1.4 kg Guedpogl Rx Hefx Albjc

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable suspension, clamp bracket -Cable holder: Cable suspension for rail system or similar -Type: Round 10-22 mm -Number: 41x holders available Gusdpfx Alewq Hx Ieboc -Price: per piece, minimum order 3 pieces -Dimensions: 230/70/55 mm -Weight: 0.2 kg/piece

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Godpfjx Ic Elox Albjuc -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 52/48/H36 mm -Total weight: 0.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Gusdjq Rg Uwepfx Albec -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 56/48/H40 mm - Total weight: 0.5 kg

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler, tensioning and sealing device Guedpfx Asi I Hdgslboc -Tensioning pliers: sealing device for strapping -Band width: approx. 16 mm -Staples: approx. 19 mm wide, see photo -Dimensions: 480/100/H170 mm -Total weight: 3.6 kg

Condition: as good as new (ex-display), Year of construction: 2019, oil-free, two-stage 160 kW screw compressor ALMIG SIMPLEXX 160 LK (air-cooled) Built: 2019 (delivery time 2 weeks) Operating hours: 0 h Furnishing: -Controller: Air Control HighEnd Technical specifications Gujdjuz Uzqjpfx Albec Type: SIMPLEXX 160 LK Operating pressure max : 8.6 bar Delivery rate at 7 bar: 28.2 m³ / min installed motor power: 160 kW Protection type / insulation class drive motor: IP 55 / F Operating voltage / frequency: 400 V / 50Hz Sound pressure level (DIN 45635 part 13): 73 dB(A) Compressed air connection: DN 100 Dimensions and weight: Length: 3730 mm Width: 1700 mm Height: 1995 mm Weight: 4700 kg

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Gedpfxsyfrpms Albeuc Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: used, Year of construction: 2000, functionality: unexamined, volume flow: 19.6 m³/h, Technical Data Manufacturer: BOGE Kompressoren Model: S 220 Year of Manufacture: 2000 Guodpsxy Sk Sjfx Albjc Machine No.: 38295 Free Air Delivery: 19.60 m³/min Final Compression Pressure: 15 bar Motor Speed: 1500 rpm Motor Power: 160 + 0.75 kW Control System: BOGE Ratiotronic

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available Godpsyffm Eefx Albouc -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available -Price: per piece Guodpfoyfmr Asx Albec -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

Condition: new, Year of construction: 2025, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, volume flow: 102 m³/h, operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 20 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar Complete 4-in-1 unit Frequency-controlled servo motor 500 liter air receiver Refrigeration dryer 4-stage fine filter New machine, delivery time approx. 1 week We are happy to demonstrate the machine at our premises. Highly efficient, permanently excited servo motor Frequency-controlled / load-dependent For clean and dry compressed air Suitable for laser applications With animated color display Single-stage screw unit Air-cooled Durable and low-maintenance Leasing or hire purchase available through our financing partner Guedpfx Aleyll Enobec Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.8 m, Height: 1.80 m, Width: 0.6 m Weight: approx. 450 kg Pressure: 16 bar (maximum: 20 bar) Free air delivery: approx. 1.7 m³/min. at 10 bar

Year of construction: 2008, condition: good (used), Freeze Dryer Kaeser TE 141 SECOTEC® Serie for compressed air systems Technical specification: Flow rate: 14,3 m3/min Gauge pressure aiir system: 3-16 bar Power consumption: 1,6 kW (at 100% flow) 0,88 kW )at 50% flow) Godpfeg A D Eujx Albjuc Power supply: 400 V, 50 Hz, 3 Ph Rated current: 4,6 A Dimension (W x D x H) : 1060 x 1520 x 1513 Weight: 660 kg

Condition: excellent (used), Year of construction: 2007, Build in 2007 Gsdpfxjg Dctyj Albouc Pressure max 16 bar Desiccant dryer, heatless regenerated

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer Godsyfm H Tspfx Albeuc -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.