Used Vimercati 4000 X 100 for sale (73,965)

Condition: good (used), Year of construction: 1981, functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Nwedpjt I Dppefx Akfef Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Nodpfx Aoyarw Hokfewf Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available matching cast iron floorplates/bedplates Integrated leveling chambers Can be used in combination with PAMA SPEEDRAM 1000 Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric US Standard Length 4000 mm Width 2500 mm Height 300 mm Number of T-slots 10 Distance between T-slots / Pitch 250 mm T-slot size 26 mm Weight per plate approx. 7800 tons Nwedpfjwpvcyjx Akfsf Number of matching pieces 2 Dimensions (Estimate) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: like new (used), 🧰 Product Details • Condition: as new • Color: galvanized • External dimensions: 100 x 134 x 4 cm • Internal clearance: 93.5 cm • Load capacity: 1000 kg/m² • Weight: approx. 37 kg • Mesh size: 4.5 x 6.5 cm 💰 Price €39 net, excl. VAT. • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible anytime by appointment Over 5,000 linear meters of pallet racks from various manufacturers permanently in stock (Technical data, specifications, and prices subject to change and errors excepted, prior sale reserved! See our GTC, all prices excl. VAT ex stock.) Nwsdexcxlnopfx Akfef

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Nwedpfev S U Izox Akfjf Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Year of construction: 1996, condition: used, material width 100 mm material thickness mm feed length 285 mm total power requirement kW Nwedpfxsul D Srs Akfof weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, Nedpfx Akexp Hhdefjwf FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Nsdpfx Aowkaaljkfjwf Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2016, Technical Data: Capacity: 4000 x 7 mm Minimum diameter: 550 mm Maximum diameter: 4000 mm Maximum sheet thickness (steel): 7 mm Maximum sheet thickness (stainless steel): 4 mm Maximum edge radius: 300 mm Minimum edge radius: 20 mm Maximum bottom diameter: 4000 mm Minimum bottom diameter: 300 mm Maximum total height of bottom including straight section: 640 mm Maximum diameter of torispherical ends: 3000 mm Minimum diameter of torispherical ends: 300 mm Maximum diameter of semi-elliptical heads: 1950 mm Minimum diameter of semi-elliptical heads: 300 mm CE marking Nedpjw Tq Siofx Akfowf Working height: 640 mm Motor power: 15 kW Weight: approx. 5.5 t Accessories: various tools Condition: Very good condition, little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER Nwsdoxf H Rqopfx Akfsf 3000 X 110 CYBELEC CNC 3 AXES MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) Nedpfx Aetxitcjkfjwf 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Condition: excellent (used), Aluminum silos standing on foot ring (plastic granulate silos) - used - designed for a bulk density of 0.6 kg/dm³. volume: 100.000 ltr. Available quantity: 4 diameter: approx. 3.500 mm cyl. height: approx. 9.900 mm Total height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the top floor: 15°. Nwjdsipyq Njpfx Akfof Equipment and connections: In the topsoil: 1 x access and vent opening DN 600 with cover. 1 x vent opening with cover 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane eyes In the jacket: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe holders for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower stand frame The silo ends at the bottom in a 90° cone with DN 200 flange (discharge height: 1,000 mm). Additional price: Two of the silos have a two-row ladder with back protection (incl. 1x rest platform) The currently connected measuring and control equipment is included in the above-mentioned Offer included. For their function however no warranty is assumed! Please note that the two silos differ slightly in terms of their connections and their position differ slightly. Otherwise according to pictures and drawing.

Condition: excellent (used), 5 x aluminum silos standing on a foot ring (plastic granulate silos) - second-hand - designed for a bulk density of 0.6 kg/dm³ Technical data / dimensions Available quantity: 5 Volume: approx. 100,000 liters Container type: Silo Condition: used Design: upright External diameter: approx. 3,000 mm Cylindrical height: approx. 16,250 mm Total height: approx. 17,500 mm Specific weight of the medium: 0.6 to/m³ Material / composition Jacket material: Aluminum Nedjtq A Emspfx Akfowf Features Stand form: Foot ring/stand frame Top base type: Conical base Gradient: approx. 15% Bottom shelf type: Cone Cone inclination: 90 degrees Top floor: 1 x DN 600 access dome with hinged lid and safety grille 1 x NW 200 ventilation nozzle with rain hood 1 x flange nozzle for Silopilot (level measurement) 1 x Block flange for full detector 1 x Roof edge railing with handrail 2 x crane eyes Jacket: 1 x access door 850 x 2025 mm 1 x filling pipe NW 80 with tangential entry into the silo, ending at the bottom in B-coupling at the bottom 1 x cable protection conduit (19 mm) 1 x connection piece for full detector Various openings in the frame shell for the passage of pipes The silo ends at the bottom in a 90° cone with an outlet flange DN 500 (outlet height: approx. 500 mm). Remarks: The currently connected measurement and control technology is included (if available). However, no warranty is given for their function! One of the silos has a two-pass access ladder with back protection and dwelling platform (surcharge: € 1,500 plus VAT). Otherwise according to pictures and drawing

Condition: good (used), Insulated, heatable/coolable, cylindroconical, stainless steel fermentation pressure tanks (former beer storage tanks) standing on steel base ring - used - (tank with papers) Nsdpfxof Iylys Akfowf capacity approx. 100.000 ltr. operating pressure: 1 bar inner diameter approx. 3.900 mm outer diameter with insulation approx. 4.100 mm cyl. height approx. 9.365 mm total height approx. 13.580 mm weight approx. 12,640 kg vessel with upper cone bottom and lower cone Vessel shell and cone provided with cooling zones. Cooling zones jacket designed for 0.4 bar Cooling zones cone designed for 0.5 bar Complete vessel approx. 100 mm foamed with PU foam, with galvanized, screwed cover plate (plate may have to be replaced) Connections: on top bottom in the middle: 1 flanged connection piece NW 500 with pulled-down CIP line DN 80 1 venting spigot DN 200 on the jacket: Connection flanges NW 50 for coolant inlet and coolant outlet at the cone: 1 manhole 450 x 350 mm Cone tip ends in an outlet connection DN 100 otherwise according to drawing + photos

Condition: used, functionality: fully functional, offered is: CEIA Metal Detector THS/PH21N (100 x 40) Nwjdpfx Aexdltzekfof Metal detector for tablets and capsules - Electronics/Control - Search head passage: 100 x 40 mm - Reject system - Design: stainless steel or plastic chute - Angle of inclination 45°: inlet height max. 1.010 mm / inlet height min. 610 mm - Angle of inclination 22,5°: inlet height max. 945 mm / inlet height min. 545 mm Several systems with different configurations are available. If interested, please contact us!

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Njdpfx Asxx Truskfswf Total height: 4000 mm Unit weight: approx 6 T

Condition: new, width of the strips 100 mm band length 1220 mm Nsdpfx Ajupxm Eekfewf band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, table length 4000 mm Nwsdpfx Akevn U Dzjfof table width 2000 mm 28 mm table height 815 mm kg weight of the machine ca. 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement.

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Nwjdpfsu Iukfsx Akfef Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm Nsdpfevn S E Njx Akfowf - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Year of construction: 2008, condition: good (used), Our Rommel Scanstation is available for sale. Model: WL 1000 ID-X Year: 2008 Condition: good Immediately available Nedeyyk T Uopfx Akfewf

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Nwedpfx Akjyzpkzsfef Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Nwedpfxjxllclj Akfjf

Condition: good (used), Technical specifications for the pallet rack stand: Shelving system: Arestant Nedowa Tcrepfx Akfowf Type: AS Included in delivery: 1x pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (screwed framework) Height: 4,500 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 15,540 mm Number of bays per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Nwsdpfjruqfajx Akfsf Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 600 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 75 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack crossbars, used Material color: sendzimir galvanized I-profile: 120 x 50 mm Beam type: SLI120/14 Agraffe: 5 HK Clear width: 3,000 mm 40x locking pin, used Material color: sendzimir galvanized To secure the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.