Used Webster & Bennett High Speed Vertical Borer for sale (47,349)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication Nwjdsxn A Spepfx Aiqsi • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Nwedpox N Ih Iofx Aiqsi Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Nwodpjf Rt Irefx Aiqei

Condition: new, New High speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Nwedpfx Ajgayiaeiqji

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Nwjdpoq Nin Usfx Aiqei

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Njdpfx Aisrl U S Eeqjwi Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Nwsdpfxofmavxs Aiqsi Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Nwodovkfmrepfx Aiqji Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: good (used), Year of construction: 1996, operating hours: 51,573 h, ram adjustment: 51 mm, table length: 510 mm, table width: 400 mm, input voltage: 400 V, Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Nwodpfxsq A Uahj Aiqsi Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. CABIN ON PHOTOS IS NOT INCLUDED (optional cost of cabin only 8.000 EUR) Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. Nwedpfxey Dn E Nj Aiqoi This is a used machine, therefore we sell under exclusion of any warranty.

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction Nwsdpjiihqwsfx Aiqji

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Spindle mount SK 40 Spindle speed range 40 - 2000 + 125 - 6300 rpm. Quill adjustment Nwjdpswg Rybsfx Aiqsi Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm Nsdpfx Aionygvrjqewi 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Year of construction: 1978, 40 1008 Nwsdewg Hunjpfx Aiqsi rated current 20 A voltage 24 V weight of the machine ca. 3,5 t

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, Njdpfjy A H Tpjx Aiqewi oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 Nodpfxehgiyij Aiqswi -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Nwjdshgiwnepfx Aiqei Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Year of construction: 1999, condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Nwedpfx Ajim Iv Doiqoi

Year of construction: 2021, condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Njdpfek E Nccex Aiqowi

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! Nwodpfx Asymnykeiqsi TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Njdpjxvrniefx Aiqewi Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Full band saw blade sharpening equipment

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. Nwsdpfx Aioxmhfleqoi This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Njdpfjymazgjx Aiqjwi Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Nwsdpsymayiofx Aiqsi Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: like new (used), Collette high speed bowl mixer Model: SM200 high speed bowl mixers, 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls Njdpfxjd D N Rmo Aiqjwi