Used Weld Cleaning Line for sale (20,472)

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Knodexf Up Iopfx Apdob

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Knedpfxeyq Srlo Apdob Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile. Ksdpfjtpui Iox Apdenb

Condition: good (used), functionality: fully functional, Pea Washing Line Complete pea washing installation, consisting of a vibratory trough with a stainless steel work platform and a drum pea washer. The set is designed for the preliminary and thorough cleaning of vegetables from contaminants, sand, and organic residues. The set includes: Kodpfoxq R Epox Apdsnb 1. Vibratory trough with stainless steel work platform Trough width: 1020 mm Overall dimensions: 4150 × 2800 × 1750 mm 2. Pea washer Internal tank dimensions: 1050 × 1100 × 400 mm Overall dimensions: 4900 × 2400 × 2700 mm The pea washing installation is designed specifically for use in vegetable processing lines. The vibratory trough ensures uniform feeding and pre-cleaning of the product, while the water washer enables intensive rinsing and separation of contaminants.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, FORSTNER nuSLIT longitudinal slitting and cut-to-length line, year 2025. The machine is in excellent condition and fully operational. It was used only at several exhibitions and in a demo center. The machine is designed for longitudinal slitting and sheet cutting operations. It is fully programmable, with automatic adjustment of the longitudinal slitting knives. Kjdpfx Aoy Dfnnjpdonb Longitudinal slitting into 6 strips (5 pairs of knives) with the possibility to mount up to 7 pairs. Equipped with a modern F3 control system featuring a touchscreen interface, which allows easy programming of different lengths, widths, and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and enables precise, clean perpendicular cuts. Integrated material-saving function – the machine stops, the slitting knives are raised, and the sheet is automatically fed into the shears. Comes with complete technical documentation. Specification: Model: FORSTNER nuSLIT 1250 Made in: Austria Year: 2025 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Cutting: rotary shears Controller: F3 Other features: automatically adjustable longitudinal slitting knives If you have any further questions, we will be happy to assist you.

Condition: ready for operation (used), functionality: fully functional, Ready slaughterhouse Complete slaughter line – the system integrates specialized machines at every stage – from animal reception and stunning, through scalding and organ removal, to final cutting, cooling, and packaging. The modular design ensures scalability, allowing for expansion or configuration adjustments as production needs evolve. Thanks to advanced automation and ergonomic solutions, the line minimizes manual labor while improving operator safety and work efficiency. This turnkey solution has been designed for reliable, high-performance operation in compliance with EU regulations, making it an ideal investment for modern meat processing plants.Wydajność linii: Line capacity: 80–120 pigs per hour Scalability: thanks to independent subsystems and automation The line includes the following elements: 1. Animal Receiving and Handling Location: animal scales, Office vestibule, Livestock Separation Equipment: Animal scales – accurate weighing of livestock (capacity: up to 120 pcs/hour) Hand and apron disinfection washers – ensure staff safety 2. Stunning and Bleeding Location: Loop washer, Unit feeder, Equipment: Electric stunner for pigs Bleeding conveyor Trays for blood collection Loop washer with lowering mechanism – capacity: 100-120 pcs/h 3. Parboiling and scalding Location: Parboiling and bristling Equipment: Parboiling tub Brushing machine (star) Automatic positioning system – 80-120 pcs/h 4. Preliminary Dissection and Evacuation of Organs Location: Intestine Separator, Stomach Emptying Table Equipment: Intestine and gastric cleansing lines Gastric centrifuge Blowing system – up to 120 pcs/hour 5. Dissection Proper Location: Dissection Equipment: Upper cutting line Inspector platforms Carcass conveyor Quality marking stations Aprons, disinfection equipment 6. Cooling and Separation Location: Separation cooler Equipment: Hanger system Overhead carts Palletizing and final weighing area 7. Cleaning, Waste and Packaging Location: Packaging and Waste area Equipment: Material separator Tray packer Pallet wrapper Advantages of complete pork slaughter line: Our complete pig slaughter line is designed to process up to 120 pigs per hour with optimal hygiene and efficiency. Each processing stage -from stunning to final packaging- is fully equipped with specialized machinery tailored to industry standards. The modular system allows for scalable expansion, enabling you to adapt production to your facility’s growth. Automation and ergonomic design minimize manual labor while maximizing throughput and operator safety. High-precision equipment ensures accurate weighing, clean cuts, and reliable internal organ handling. Multiple sanitation points and tool sterilization stations guarantee food safety and compliance with EU norms. This turnkey solution integrates cutting-edge technology to streamline meat processing from live animal intake to cold storage. Kjdpfx Apswu U Irodjnb

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Kedpeznx Ndsfx Apdonb

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Knsdpfx Apsyz Rt Dodob Stock no. - 1128 1/2

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Ksdsz Alpmepfx Apdonb Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Knsdpfx Aezvm Anopdjb Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Knedpfx Ajy Idxyepdjb Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Knjdpfx Apjy Nl U Ssdjb

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning Knjdpfsu Aafdjx Apdsb - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: ready for operation (used), Year of construction: 2019, total height: 2,110 mm, total width: 1,413 mm, overall weight: 640 kg, product length (max.): 1,413 mm, number of axes: 6, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information • Robot is completely new and never used • Robotics and Control Unit • Max. payload: 15 kg • Working range: 0–4500 mm • Digital inputs/outputs: 16 • Serial interface: Yes • CAN bus: Yes • USB interfaces: 2 • Flash memory: 8 GB • Buffer module: 24 V • Expandable to up to 12 axes • Welding Technology Power source: Included • Welding interface: Integrated Kedpex D Hdhofx Apdonb • Welding and function test: Included • Torch cleaning: CMR-8-C torch cleaning device • upright Robotic welding torch: Included • Sensors Tactile sensor: Yes • Arc sensor: Included Technical Data of Workpiece Positioner • Load capacity: 10 kN • Nominal torque: max. 1600 Nm • Tilting moment: max. 8800 Nm • Mass moment of inertia: 900 kgm² • Rotation range: +,- 360° • Swivel range: 370° • Welding Fume Extraction capacity: 3000 - 4320 m³/h • Motor power: 5.5 kW • Connection voltage: 3 x 400V/50 Hz • Noise level: 65 dB(A) • Weight: 640 kg • Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: P260302015, total height: 350 mm, total width: 300 mm, total length: 800 mm, overall weight: 80 kg, machine base height: 180 mm, INVENTORY STATUS: 3 UNITS Kjdszrmvaspfx Apdjnb For sale is a professional, multi-section process module manufactured to hygienic standards, designed for the food, brewing, or chemical industries. Main components of the set: • Pumps: Series of centrifugal pumps with stainless steel housings (protection against flooding/hygienic standard). • Flow measurement: Integrated electromagnetic flowmeters (visible control units with LCD displays, e.g., from Endress+Hauser or a similar class). • Construction: The entire unit is mounted on a stable stainless steel frame (skid type), which facilitates transport and installation in a new production line. • Piping: Complete acid-resistant piping with flanged and hygienic connections. Key advantages: • Precision: Thanks to the flowmeters, the system allows for very accurate dispensing of liquids or monitoring of media transfer. • Hygiene: Stainless steel construction allows operation in CIP (Cleaning In Place) systems. • Ready for operation: Complete module ready to be connected to an existing process installation. Technical condition: Very good, the installation is regularly serviced and operates in a clean production environment.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Knjdey N Duqopfx Apdob Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Knsdpfjzzvf Asx Apdob Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Knjdpfx Apezvz Tbsdsb Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, HAMOS KWS 1010-0 – complete electrostatic separation line We are selling a complete HAMOS KWS 1010-0 electrostatic separation line, including dust extraction, conveyors, hoppers, vibrating screens, and other accessories. The equipment is designed for dry electrostatic separation of conductive and non-conductive materials, particularly for separating metals from plastics and other non-conductive materials. It is suitable, for example, for processing plastic mixtures, cable waste, electronic waste, and other mixtures containing conductive and non-conductive components. The complete line includes: * electrostatic separator HAMOS KWS 1010-0 * dust extraction and filtration unit IGM PFLUX * large input hopper for material / big bag * conveyor for transporting material to the separation line * large vibrating screen * small vibrating screen * replaceable screens for preparing the desired 1 mm and 2 mm fraction * frame, hoppers, and other line accessories Material handling The large input hopper is designed so that it can be removed from the frame and transported to the desired location using a forklift. This allows the material from the big bag to be emptied into the hopper outside the line itself, and then the hopper can be placed back on the frame. From there, the material is transported to the next part of the process. Knedszvgm Hopfx Apdob HAMOS service and modernization The separator itself underwent service and modernization work directly at the HAMOS manufacturer in 2024. As part of these works, the following were carried out, among other things: * new dust extraction solution * electrode cleaning adjustment * installation of a new control unit * other service and refurbishment work The line is available immediately. We prefer to sell the complete technology.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: LR2009MAHEDEDM100PO1, type of input current: AC, total width: 1,150 mm, total length: 2,850 mm, total height: 1,900 mm, overall weight: 1,100 kg, outer diameter of label roll: 550 mm, inside diameter of label roll: 76 mm, input voltage: 380 V, compressed air connection: 6 bar, For sale is a fully automatic mask machine DM-85-P (CE version) with 380V connection – suitable for masks Type II and IIR. The mask machine is designed to process multi-layer fabrics into various masks by means of forming folds, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask machine Lianrou LR-DM-85-P is a late-generation model and is also a patented product by LIAN ROU. Compared to traditional disposable mask machines, it offers the following advantages: First, the LR-DM-85-P requires only one unit to complete the entire mask production process, which significantly reduces the space required for the production line; second, it features an integrated production design with an aesthetically clean and organized structure. Knsdpfxeya Hdbs Apdeb Most importantly, it is equipped with a range of reliable safety features, thus ensuring a safe operating environment for the operator. In summary, this machine stands out for its excellent cost-performance ratio and high reliability. Technical data / Notes: Model: DM-85-P Design: Electric-Pneumatic Voltage: 380V Certification: CE Manufacturer’s documentation and wiring diagrams included If interested, please get in touch – viewing by appointment possible.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 41000137, number of ink cartridges: 7, color channels: 7, • One-Shot Color, • Gigabit LAN, • In-Line densitometer • Scroll rollers • Enhanced Productivity Mode (EPM) • 5th unit with OFIR (On-Press Fast Ink Replacement), • 6th and 7th color units • Unwinder/Rewinder, Flex-pack-arm, Simplex-duplex re-insertion • In-Line priming unit (ILP) + 1 normal roller + 1 wine roller • Web guide ILP unit • DP680 upgrade kit HP SmartStream Labels & Packaging for HP Indigo WS6000, Powered by ESKO V5.2.3 • HP SmartStream IN100 Labels and Packaging Server, Powered by EskoArtwork • HP SmartStream Labels & Packaging Color Kit, Powered by EskoArtwork Ksdjzp U U Espfx Apdonb More information: 1. The press is still in production. 2. The press has an HP service contract for spare parts, a service contract, and technical support with an official HP certified representative. 3. The press is available for visit and inspection at the production site until August 25, 2026. 4. On August 26-27, 2026, the press will be cleaned, disassembled, and palletized by the technical service team and stored in the warehouses of an international transport company in Athens. More photos and videos are also available!

Condition: refurbished (used), Fronius TPS 4000 CMT welding machines All units have been tested. They can be used without any issues as manual welding machines. We have various interfaces available. Simply inquire. Immediately available from stock. Knjdpet Evqgofx Apdob Viewing by appointment only. We sell certified welding machines from renowned manufacturers for industrial use. All devices have been function-tested and cleaned. The machines can also be tested on-site. Shipping by freight forwarder is also possible. You will receive an invoice from us including VAT. Take a look at our other listings as well. If you don't find what you're looking for, feel free to send us a message or call. We always have up to 40 units in stock that have not yet been tested or listed.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly. Knodpfx Ajzb Dr Sspdsb

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Knsdpfjunh Uvjx Apdsb Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, MIMAC Volumetric Depositor – 2 Hoppers / 12 Nozzles – 2014 Professional Bakery / Industrial Depositing Machine For sale: professional volumetric depositor MIMAC, year 2014, designed for high-precision dosing of cakes, muffins, sponge batters, creams, and soft pastry products. The machine is in very good working condition and was previously used for cake production. Technical Data Manufacturer: MIMAC (Italy) Year: 2014 Power supply: 200–240V Frequency: 50/60 Hz Power: 1.8 kW Single phase (1Ph) Stainless steel construction Mobile frame on wheels ⚙ Equipment 2 product hoppers 12 nozzles (6 + 6 configuration) Conveyor belt system Touchscreen control panel (very good condition) High precision volumetric dosing system Key Advantages High production capacity Extremely accurate portion control Ideal for industrial & semi-industrial bakery lines Easy cleaning and maintenance Reliable and proven Italian engineering Applications Cakes & sponge batter Knjdpfey Ucypjx Apdeb Muffins & cupcakes Soft dough products Creams & fillings Bakery / pastry production lines Condition Fully functional Well maintained Ready for immediate production Available for inspection and testing