Welding fume extraction

Dust Hog UAS SBS-4-2 SD

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Iodpfx Agewr Dv Hstetp

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Isdpfsppyhtsx Agtstp Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Iodpfx Ajlf Ek Dsgtstp

Condition: ready for operation (used), Year of construction: 2008, Fanuc 21ITB 16-tool changer BT50 Iedpfowzyndex Agtjtp 1600 mm table, maximum rotation speed 250 rpm, maximum admissible weight 8000 kg maximum diameter 2000 mm, maximum machining height 1250 mm travel 250 x 250 mm, Z-axis travel 900 mm chip conveyor

Condition: new, Year of construction: 2025, total length: 19,100 mm, total width: 6,600 mm, total height: 5,000 mm, inner dimension height: 4,000 mm, inner dimension length: 18,000 mm, inner dimension width: 6,000 mm, We offer the production of foldable, "accordion-style" spray booths in any dimensions and specifications defined by the client. Example projects can be seen in the photos. As a manufacturer, we handle the design, production, installation, and warranty service of spray booths. Our offer includes a wide range of spray booths – we encourage you to check out our other listings. Itsdpfevphfzex Agtsp Feel free to contact us!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min Itsdpfx Aovx E Ncogtep FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2004, condition: good (used), Manufacturer: Hein Lehmann Type: LF 2,0 – 6,30 / 30 ED Itedpfx Ash Ty Tqogtep Size: 2.000mm x 6.300 mm Decks: 1 Year of Manufacture: 2004 With Frame.

Condition: new, Year of construction: 2025, Yanigav TAMD245 Earth Auger • Easy three-point hitch • Very robust, welded, machine-made chassis • Versatile, powerful transmission from 30 to 90 hp • Applicable tines from 10 cm to 80 cm in diameter and a maximum height of 1.80 m • Offset of 1.30 m on each side of the axle • Chassis with a length of 245 cm Itodpfor Eznisx Agtsp • Excl. auger

Condition: used, Grinding dust extraction Iodpecfy Hqefx Agtetp

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg Ijdpfxevpafyj Agtjtp