Used Wmw Zerbst Facing Lathe for sale (7,107)

Condition: used, functionality: fully functional, TRAPANO RADIALE USATO 40X1250 WMW REVISIONATO A NORME. Guedpfx Akozky Imsaog

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips * Godpfx Aeu Ix Arskajug

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Godpfjvw Uqaox Akasug Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Gujdpfx Akshw Emqeasg Maximum pressure 10 bar Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Gsdpfxszwghms Akaeug Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Guodpfx Akez Agzdsaeg Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Guedpfx Aoz Agzqjkasg Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Gsdpouddcgofx Akasug Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate Gsdpfx Akexbzqqjaoug - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: good (used), functionality: fully functional, Renovated in 1992. Gsdpfoulzpzox Akaoug

Condition: used, Lathe Manufacturer: WMW/BWF Year of manufacture: 1959 Machine number: 8932-05 Type / Model: DLZ 400/1500 Control: Conventional Centre distance: 1,500 mm Spindle bore: 40 mm Centre height: 200 mm Turning diameter over bed: 400 mm over cross slide: 250 mm Drive power: 5 kW Gedjyt Nn Aopfx Akasug Accessories/Equipment: Standard tool holder; 3-jaw chuck Condition: Good Weight: 3 t Dimensions: 3,100 x 1,000 x 1,500 mm

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm Godpou T Drysfx Akaeug X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate Guodpfxsvwgpbj Akaog - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Gusdpfxjvbh N Ro Akasg Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Gjdpfx Ajzh Dtzskaoug Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Gujdpfoy Rgm Esx Akaeg Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Guodpfx Akoy Rgl Usasg Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine approx.LxWxH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Gujdpfx Asu Ix H Dskaeg Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, Cutting length: 3150mm, cross-blade cutting length: 180mm, idle stroke rate: 25/min, connected load: 47kW, an on-site inspection is possible. Guedozybutspfx Akajg

Condition: used, faceplate diameter 800 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Gjdpoyx Ipwefx Akasug apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 28 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 140 rpm, bed width: 135 mm, overall weight: 160 kg, ## OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA – professional metalworking machinery For over 12 years, we have been supplying metalworking machines to customers throughout Poland and Europe. We focus on quality, precision, reliability and professional technical support. ### MTP TYTAN 750 PREMIUM UNIVERSAL LATHE – 0.75 kW / 230 V WITH STEADY RESTS The MTP TYTAN 750 PREMIUM is a robust and precise universal lathe designed for workshops, production facilities and training centres. It is suitable for external and internal turning, longitudinal and facing operations, drilling, taper turning, and cutting metric and imperial threads. ### FEED AND THREADING GEARBOX The machine is equipped with a mechanical feed and threading gearbox with two gear-selection levers, allowing the operator to quickly and accurately select the appropriate transmission ratio for the required operation. A clear feed, threading and gear-selection chart is located directly on the front of the machine, making it easy to select the correct lever positions and change-gear configuration. Combined with precise synchronisation of the lead screw with the main spindle, this system enables accurate and repeatable cutting of metric and imperial threads. The machine bed features double-prismatic guideways, providing high rigidity, stable carriage guidance and excellent machining accuracy. The PREMIUM version also features a tailstock with an eccentric quick-lock mechanism, allowing fast positioning and secure locking. Thanks to its 230 V power supply, no three-phase electrical connection is required. IN STOCK – IMMEDIATE DISPATCH AVAILABLE! PLEASE NOTE: MACHINE STAND / CABINET IS NOT INCLUDED. ### TECHNICAL DATA: • Turning length: 750 mm • Max. turning diameter: 265 mm • Bed width: 135 mm • Spindle bore: 28 mm • Spindle taper: MT4 • Tailstock taper: MT2 • 3-jaw chuck: 125 mm • Spindle speed: 140–2000 rpm • Metric threads: 0.2–3.5 mm • Imperial threads: 8–56 TPI • Motor power: 0.75 kW • Power supply: 230 V • Dimensions: 1510 × 570 × 580 mm • Weight: 160 kg ### STANDARD EQUIPMENT: • 125 mm 3-jaw chuck • 4-position tool post • Mechanical feed and threading gearbox • Change gear set • Fixed and travelling steady rests Guodpfjyuc T Iex Akasg • Set of 5 turning tools, 10 × 10 mm • Self-locking drill chuck • Drill chuck arbor • Jaw set • 2 fixed centres • Chuck guard • Chip guard • Chuck key The robust steady rests provide additional support and stability when machining longer workpieces. ### SALES CONDITIONS: • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Technical documentation / operating manual • Delivery to the customer can be arranged Transport costs are calculated individually according to the delivery destination. We also invite you to explore the complete range of Metal Technics Polska machines.

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm Gedpfx Aksha Hvveaoug -Weight: 2200 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Gsdpfx Akowb Dhnsaoug Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Stroke of the lower ejector: 160 mm. Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul.

Condition: excellent (used), functionality: fully functional, Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc. Gujdpfxeyr S Upe Akaog

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Guodpozqvhvefx Akasg