Used Artiglio Sd 80 for sale (18,209)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) Ppsdjy Hkd Hspfx Akfsr For further questions, please feel free to contact us by phone.

Year of construction: 1991, condition: used, For sale: Multivac R 80 packaging machine Year: 1991, 380V, 50 Hz, No. 232, 16 kW Made in Germany Psdpfx Aey Hg Hkjkfspr Net price: 1,400 Euro Price negotiable

Condition: used, axle configuration: 3 axles, first registration: 08/2000, loading space length: 13,000 mm, loading space width: 2,550 mm, total length: 13,700 mm, total width: 2,550 mm, total height: 2,400 mm, suspension: air, tire size: 235/75R17,5, color: other, Year of construction: 2000, Equipment: ABS, Number of axles: 3, twin tires, unladen weight: 11,000 kg, gross weight: 36,000 kg, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, body year: 2000, low loader type: semi low-loader, loading platform length: 1,300 cm, extendable chassis: front, axle type: BPW, spare wheel, spare wheel tread: 4% = More information = General information Cab: Day Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: twin tires; left inner tire tread: 6 mm; left outer tire tread: 6 mm; right inner tire tread: 6 mm; right outer tire tread: 6 mm Axle 2: twin tires; left inner tire tread: 6 mm; left outer tire tread: 6 mm; right inner tire tread: 10 mm; right outer tire tread: 10 mm Axle 3: twin tires; steered; left inner tire tread: 4 mm; left outer tire tread: 4 mm; right inner tire tread: 6 mm; right outer tire tread: 5 mm Pjdpfxjx Irarj Akfspr Weights Kerb weight: 11,000 kg Payload: 25,000 kg GVW: 36,000 kg Functional Platform height: 90 cm Environment Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Visual condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European brands, model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Reliable trading • We speak many languages • We understand our customers • Support with import and transport • (Export) registration numbers arranged quickly • Professional technical services • Security of “recognizable quality” • And much more... Please visit our website for special offers and our full inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate and send a request easily via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 08/2000, loading space length: 13,000 mm, loading space width: 2,550 mm, total length: 13,700 mm, total width: 2,550 mm, total height: 2,400 mm, suspension: air, tire size: 235/75R17,5, color: other, Year of construction: 2000, Equipment: ABS, Number of axles: 3, Twin tires, Unladen weight: 11,000 kg, Gross weight: 36,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, Body year: 2000, Loading platform length: 1300 cm, Extendable chassis: Front end, Axle type: BPW, Spare wheel, Spare wheel tread: 11% = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Ppsdpfox Iraljx Akfer Suspension: Air suspension Axle 1: Twin tires; Left inner tire tread: 2 mm; Left outer tire tread: 3 mm; Right inner tire tread: 2 mm; Right outer tire tread: 10 mm Axle 2: Twin tires; Left inner tire tread: 5 mm; Left outer tire tread: 5 mm; Right inner tire tread: 7 mm; Right outer tire tread: 6 mm Axle 3: Twin tires; Steering; Left inner tire tread: 9 mm; Left outer tire tread: 5 mm; Right inner tire tread: 7 mm; Right outer tire tread: 5 mm Weights Unladen weight: 11,000 kg Payload: 25,000 kg GVW: 36,000 kg Functional Loading platform height: 90 cm Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): certified until 07.2026 Condition General condition: poor Technical condition: poor Visual appearance: poor Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly varying stock of 1,200 used trucks, tractors, and trailers. Our inventory covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • Competitive pricing • Professional trading • Multilingual staff • We understand our customers • Import and transport support • (Export) license plates issued quickly • Expert technical services • The security of 'recognizable quality' • And much more… Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request on our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) Ppodpfxsy Ep Rte Akfsr NC swivel head Tool holder: HSK 63 FD function Pallet changer Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) Ppedpfjvnv Uhsx Akfjr - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: good (used), axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 2,730 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,155 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2022, Sidewall material: Curtain, Customs cord, Sliding roof, Axle type: KRONE, WIDTH EXTENDABLE // 2X LIFT AXLE // PALLET BOX // DISC BRAKES = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 11 mm; Right tyre tread: 12 mm Ppodpfx Akjy Hqqgefjr Axle 2: Left tyre tread: 7 mm; Right tyre tread: 13 mm Axle 3: Lift axle; Left tyre tread: 8 mm; Right tyre tread: 7 mm Weights Unladen weight: 7,155 kg Payload: 31,845 kg Gross weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our stock includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Reliable commercial practice • Multilingual staff • We understand our customers • Support for import and transport • (Export) license plates arranged swiftly • Expert technical services • The security of ‘recognizable quality’ • And more…. Please visit our website for special offers and our full stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request through our website. Ask directly about our European warranty packages.

Condition: good (used), axle configuration: 3 axles, first registration: 06/2021, total length: 9,500 mm, total width: 2,450 mm, total height: 1,700 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 37,810 kg, Unladen weight: 5,190 kg, Gross weight: 43,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2021, Rotation positions: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: front / middle / rear, Axle type: KRONE = Further Information = General Information Cabin: Day Registration number: OS-25-VD Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 12 mm; Tyre tread right: 12 mm Axle 2: Tyre tread left: 9 mm; Tyre tread right: 12 mm Axle 3: Lift axle; Tyre tread left: 10 mm; Tyre tread right: 12 mm Weights Curb weight: 5,190 kg Payload: 37,810 kg Gross Vehicle Weight (GVW): 43,000 kg Functional Loading platform height: 115 cm Pedpfxjy Hqp Ne Akfepr Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European brands, manufacturing years, and price ranges. Why buy at Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Accurate and reliable service • Multilingual staff • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Professional technical services • The safety of 'recognizable quality' • And much more.... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 01/2020, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 2,730 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,055 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Superstructure year: 2020, Superstructure material: Steel, Sliding roof, Axle type: KRONE, WIDTH EXTENDABLE // 2X LIFT AXLE // PALLET BOX // DISC BRAKES = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Ppsdey Hqp Aopfx Akfsr Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 3 mm; Tyre tread right: 11 mm Axle 2: Tyre tread left: 7 mm; Tyre tread right: 9 mm Axle 3: Lift axle; Tyre tread left: 13 mm; Tyre tread right: 5 mm Weights Empty weight: 7,055 kg Payload: 31,945 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environmental Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Verified quality • Competitive pricing • Professional business conduct • Multilingual support • We understand our customers • Import and transport support • (Export) license plates arranged quickly • Expert technical services • Guaranteed “recognized quality” • And more... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 01/2020, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,730 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 400 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 7,055 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2020, Sidewall material: Tarp, Sliding roof, Axle type: KRONE, WIDTH EXTENDABLE // 2X LIFT AXLE // PALLET BOX // DISC BRAKES = Further Information = General Information Cab: Day cab License plate: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 3 mm; Right tyre tread: 11 mm Axle 2: Left tyre tread: 8 mm; Right tyre tread: 12 mm Axle 3: Lift axle; Left tyre tread: 11 mm; Right tyre tread: 9 mm Weights Unladen weight: 7,055 kg Payload: 31,945 kg Gross Vehicle Weight (GVW): 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none Ppjdpfx Asy Hqppekfjr = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and fast-changing inventory • Recognizable quality • Competitive pricing • Honest trade practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Ppjdpfx Akey Ed Icefer X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: used, empty load weight: 6,617 kg, maximum load weight: 29,383 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2023, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Krone SDP27 Profiliner | Pallet box | 1st axle liftable | EDSCHA sliding roof | BPW axles with disc brakes | Spare wheel holder | Lashing rail | Toolbox | Tyres: 385/65 R22.5 | Subject to errors, input mistakes and prior sale Ppjdpfxsy Dci Ao Akfor

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was refurbished in 2025. Handover price: HUF 2,850,000 + VAT. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller reconditioned. Complete surface treatment and coating of pump housing and mechanical components. Pedpfxjy Hf Imo Akfopr

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically Ppsdpfx Akjwka Hfofjr - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: 3/60 388, Format (cm): 80 Equipment / Additional information: Pedpfxomb U Rcj Akfepr 1xreserve knife Condition: Very good condition / New controller

Condition: excellent (used), machine/vehicle number: 894126H, Condition: Very good condition // totally overhauled – new heating Pedpfx Aorigyzekfjpr Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 1107, P/N: 190.101 Podpfx Asihvl Iskfspr Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 783, P/N: 190.101 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pedpfx Asiiv Dnskfopr

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Pjdpfx Akognlb Asfopr Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 1,000 kg, overall weight: 1,000 kg, type of input current: three-phase, power: 13 kW (17.68 HP), electrical fuse: 32 A, Batch mixer WP UC 80 A Removable bowl trolley Manual control 2 timers, 2 speeds Stainless steel bowl and mixing tool Ppodpfxsy Ebkho Akfsr 210-liter bowl Connection: 400 V, 32A CEE plug Used machine Visit our large exhibition!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 1,000 kg, overall weight: 1,000 kg, type of input current: three-phase, power: 13 kW (17.68 HP), electrical fuse: 32 A, Batch mixer WP UC 80 AC Ppsdpfx Akjy Ebh Tsfor with 2 removable bowl trolleys for high and consistent batch quality 2 timers, 2 speeds uniform product quality DGUV V3 safety tested—exclusively from us Connection: 400 V, 63A-CEE plug Refurbished used machine, inspected & SAB tested with warranty and spare parts service Visit our large showroom!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Ppodpoy Ew N Hofx Akfer Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm Ppodpfx Ajvn Svuekfsr DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 Ppjdpfx Akey D Hupefjr -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor Podpfx Aket E D Exefspr -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 320/290/H205 mm -Weight: 20 kg