Used Bütfering Optimat Sbc 111/C Sandy for sale (55,669)

Condition: used, Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system Iedpfjgw Imaex Af Tjib -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Condition: repair required (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing Isdpfx Afehv Ilws Tsib -Manufacturer: Lincoln, Quicklub central lubrication pump -Type: 645-41110-1 -Voltage: 100-240 V -Power: 60 watts -P max: 240 bar -Dimensions: 270/240/H570 mm -Weight: 15.5 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-300-PPVA-N3A2 -Stroke travel: 300 mm Iisdpsxwkn Refx Af Tjb -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 515/235/H95 mm -Weight: 7.0 kg/pc.

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 Single Block Electronic Module -Type: 6EC1 110-3A -Number: 3 modules available -Price: per piece Iiedpsh Apz Hsfx Af Tob -Dimensions: 65/10/H100 mm -Weight: 0.1 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft diameter: 19 mm -Design: B14 Iijdpsb A R Aljfx Af Tjb -Brake -Dimensions: 410/240/H200 mm -Weight: 19 kg

Condition: good (used), Control card, output card, controller -Manufacturer: Servomac -Type: CT 111B Iijdpfxjcc Aqke Af Teb -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.16 kg

Condition: good (used), Simodrive choke 3-phase choke for PLC control, mains filter, line filter, Simodrive choke transformer -Manufacturer: Siemens, Drossel Iedpfxev Dt Uke Af Tsib -Choke: Type 6SN1111-0AA00-0CA0 -Dimensions: 330/150/H240 mm -Weight: 16.5 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Ijdjxwvp Tspfx Af Teib -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative feedback module, monitoring module, UEB module INT/EXT. -Manufacturer: Siemens, SIMODRIVE 611 monitoring module Iisdowc N Ivjpfx Af Tjb -Type: 6SN1112-1AC01-0AA1 -Number: 2x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 4.1 kg/piece

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A Isdpfx Aeb S Htdof Tjib -Technical data: see photos -Quantity: 2 available -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

Year of construction: 2021, condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar Iodpfx Ajxy Imcsf Toib -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm -Weight: 3.5 kg

Condition: used, Radial piston pump, hydraulic pump -Hydraulic motor Iisdsb A Iycopfx Af Teb -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Iodpfoxwkr Nox Af Tsib -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads Ijdou S Tc Eopfx Af Tjib -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg

Condition: used, mileage: 60,000 km, power: 124 kW (168.59 HP), first registration: 12/1974, overall weight: 11,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 4,680 mm, loading space height: 1,450 mm, Year of construction: 1974, total width: 2,470 mm, total height: 3,050 mm, Equipment: all wheel drive, 1st hand. German fire truck with valid TÜV (general inspection) and SP (special inspection) until 12/2026. Regular registration valid until 18.02.2026. For 30 years (after its official service life), this vehicle has only been kept as a collector’s item in a hall, always regularly serviced, driven, and exceptionally well maintained by the fire department. In the meantime, it was transferred to the local airport. Iijdpfjyndg Nsx Af Tsb Bachert body in an aluminum-steel composite construction, extremely robust and built to last, with great attention to detail. The heavy-duty roller shutters and flaps are all still working perfectly. The 1113 starts immediately and is ready to drive. Good original condition. There are signs of use from over 50 years of firefighting service. No serious defects or significant rust damage are visible on the vehicle. Overall, a solid round-hood model. LAF 1113 B with 3 windshield wipers. Power steering. OM 352 A 6-cylinder diesel engine with turbocharger and just under 170 hp. 85 km/h is registered as the top speed in the papers. 5-speed manual transmission. PTO (power take-off). Hydraulic system for auxiliary equipment. Selectable 4x4 all-wheel drive. Wheelbase: 4200 mm. 3 seats. Large Rockinger trailer coupling with air connections and 10,000 kg braked towing capacity. Maximum unbraked towing capacity is 1,500 kg. RW2 rescue vehicle body with winch, power generator, and light mast. Winch: Rotzler 5 tons with 65 m steel cable. Power generator: Knurz-Kirsch 20s. Output: 20 kVA. Light mast at the left rear, hydraulically extendable. Roof is accessible via rear ladder, with aluminum checker plate, and two large storage boxes. Overall vehicle dimensions: 7300 mm long / 2470 mm wide / 3050 mm high. Box body dimensions (external measurement) approx.: 4680 mm long / 2450 mm wide / 1450 mm high. Tires: 8.25-20/14 PR, apparently without DOT marking, not porous and in good condition. The 1113 was previously registered as “Other Vehicle – Fire Brigade – Rescue Vehicle”. Battery charging socket and manual battery disconnect switch on the driver’s seat console. The odometer was replaced in 2018 and now shows 141,000 km. The original odometer with 27,000 kilometers was retained and correctly handed over to us by the fire brigade. The actual total mileage is a maximum of 60,000 kilometers, in reality likely much less. As the inspection log has been continuously maintained with mileage figures for the last 25 years, both the mileage and the odometer replacement during this period can be reliably and continuously documented. In addition to the original odometer, there is a box full of original Daimler-Benz and Bachert documents, as well as paperwork such as logbooks and generator documentation, most of which are original documents from the year of manufacture 1974. Everything is in good and well-preserved condition. The documents are not for sale separately, nor will they be copied; please accept these facts as presented. Only the buyer of the 1113 will receive these treasures along with the vehicle from us. This offer is only for tradespeople, freelancers, authorities (BOS), public institutions, and all kinds of comparably self-employed businesses. Sale to private end users is, unfortunately, not possible. Interim sale and errors excepted at any time. Net price: €18,900!

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Ijdpfsylttgsx Af Tsib Scraper top/bottom Polishing top/bottom

Year of construction: 1977, condition: excellent (used), I sell the bottom widebelt sanding machine Butfering FBS2 1100, year 1977. Configuration sanding pad - pad. Iiodpfx Ajdv N R Usf Teb Working width 1100mm. Total weight 4000kg Suitable for line. Construction with fixed working table height.

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S Isdpfep Rb Hcex Af Toib - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Iiedpfovuvbhjx Af Tob

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Iiedpfx Ajygddljf Tjb Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, grinding width: 1,100 mm, power: 11 kW (14.96 HP), height adjustment type: electric, Refurbished automatic wide belt sander suitable for calibration of solid wood and sanding of veneered components. The SANDYA 10 model belongs to the higher range of SCM automatic wide belt sanders, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. 2 units: roller + roller with platen and shared 11 kW motor 1. Calibration roller - steel 2. Sanding roller - soft rubber + pneumatic sanding platen Iisdpfx Aowx I Tpsf Tob Sanding width: 1100 mm 2 feed belt speeds Automatic thickness measurement Motorized thickness adjustment with display + fine-tuning Table extensions at infeed and outfeed Pneumatic oscillation Very good technical condition, completely refurbished Czech manual available CE safety standard Suitable for calibration and sanding of solid wood and veneer EXCELLENT TECHNICAL CONDITION The machine is refurbished, set up, and tested.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bavelloni CR 1111 Glass Edging Machine – vertical, 11 wheels Year: 1996 Speed: 0,5 – 5 m/min. Iisdpfev Nag Rex Af Teb Glass thickness: 3 – 30 mm 400 V, 3~, 50 Hz, 24 kW, 63 A Dimensions: 8100 x 1200 x 2300 mm. Weight: 4000 kg Inspection is possible by appointment. In good working condition. Available: NOW.

Year of construction: 2019, condition: new, Brand C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of manufacture: Unused Weight (kg) approx 6790 net Number of pieces in stock 17350 ( approx ) Iisdpeqa Anqsfx Af Tob Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Condition: good (used), Radial piston pump, hydraulic pump -Hydraulic motor Isdpfob A Itysx Af Tjib -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

Condition: excellent (used), Frequency converter Tecorp Type HC1A0011143D Model HC1 Drive 3 phases 11 kw length 460 mm Width 260 mm Height 240 mm weight 14,7 kg Iedpfji Hc Dvjx Af Toib