Used Plastic processing machine for sale (9)

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, power: 90 kW (122.37 HP), overall weight: 6,500 kg, operation weight: 4,600 kg, Shredding machine make WEIMA Type: WL Rotor width: 1500.mm Feed opening: 1500X1500.mm. Cltxvitc7Y Drive:90.kW. Number of knives: 82.pcs. 40x40.mm.cocav. new. Hopper height: 1030.mm. Hopper capacity:2.3 cbm. Rotor diameter:368.mm. Screen perforation: 12/15.mm. Fast hydraulics, safety package Weight: 4500.kg. Workshop overhauled, complete inspection of the machine, it was completely disassembled, sandblasted- primed and repainted in WEIMA color, Defective parts are repaired and replaced, pneumatic and electrical equipment checked and replaced if necessary. renewal if necessary. On delivery you will receive a completely overhauled machine. The photos show an overhauled machine of identical construction, Available from kw. 38. or by arrangement

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, rotational speed (min.): 2,850 rpm, type of motor: electric motor, Blower with soundproof cabin and cyclone separator. The blower uses a cyclone separator to convey the plastic regrind into an octabin Bhiu3Qn

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DEWS500, Double soaking auger, model: DEWS500. Power per screw: 7.5 kW With the Wipa double soaking screw, heavy materials can be separated from material streams to protect downstream machines. By pre-wetting plastic material streams, downstream units achieve better performance results. B09Aftez All components are easily replaceable so that you can react quickly in the event of material changes or damage. -- IMMEDIATELY AVAILABLE -- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE ILLUSTRATION --

Condition: reconditioned (used), No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available. 3Vbcf7Xb

Year of construction: 2022, operating hours: 500 h, Condition: as good as new (ex-display), machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Bzr2Kikhky Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: used, Year of construction: 2020, operating hours: 1,200 h, Metal Color Kicker Separator for separating colored objects from material streams using an RGB camera or separating aluminum or copper from material streams using a metal sensor. Description: The system, consisting of a feed chute with feed hopper, a feed plate, an acceleration belt, a sensor and camera system with particularly high sensitivity and a highly efficient flap system, was developed to separate a wide variety of materials from a waste stream. The fed material is evenly distributed on the conveyor belt of the metal kicker. At the end of the belt, the parts (> 1 to 2 mm, useful from approx. 5 mm, adjustable) are detected, analyzed and deflected out of the material flow by a highly sensitive, spatially resolving metal sensor and camera. This is done by our patented electrodynamically driven flaps. These flaps are arranged parallel to the discharge edge of the conveyor belt. Each flap is assigned a sensor/channel. 1. metal/color kicker 400: - Belt length (center distance): approx. 4,000 mm (extended version) - Conveyor width: approx. 400 mm - Total machine width: approx. 700 mm - Feed height: approx. 1,700 mm (incl. acceleration plate) - Drive: drum motor, according to requirements (usually 2.2 KW) - Electrical power: according to requirements (usually: 400 V / 50 Hz, approx. 2.2 kW, for the entire machine) - Number of flaps: 16 (flap arrangement: bottom) - Spare flaps: 1x for exchange and replacement in case of defect - Number of tracks: 16 - Integration: Metal sensor, for the detection of metals RGB camera, for identification of colors (in the first year all color programs are included, after that new color programs can be created at a price of 250,- EUR) - Collecting funnel: incl., according to requirements - Acceleration plate: incl. - Color: RAL 5021 2. switch cabinet: always adapted to the conditions on site, brand Rittal, with cooling fan, connections according to the requirements on site (normal 400 V / 50 Hz), integrated in the machine Wbrwgsdd0

Condition: new, Year of construction: 2024, Built on order The sink-float separator STF 3.0 is perfectly matched to our high efficiency SP1000 Mk2 centrifuge and together with these centrifuges forms a compact but highly capable washing line that requires little maintenance and can wash/sort up to 3000 Kg/hour of hard plastics. The machines are fully constructed in stainless steel 304 so that salt solutions can be used without any problems. Additional peripherals such as water purification, transport screws and big bag loading stations are also available. Vxj03U It is possible to assemble a complete line with 3 steps, but the machines are also available separately for your own project. Ask us for more information.

Condition: new, Year of construction: 2024, Stock machine Z788R7A Completely redeveloped high efficiency centrifuge based on our many years of production experience with the predecessor of this centrifuge, we have made various improvements with regard to maintenance costs, downtime and wear and tear parts.

Condition: new, Year of construction: 2024, Built on order Cstobxp0Zd Vibrating sieve to filter the process water. Process water is preferably used in a closed circuit. The authorities also see this as the ideal solution. Obtaining the permits for a recycling plant is greatly simplified by the use of a closed circuit and the costs of using the plant are significantly lower.