Used B.c.m. Bottle Unscrambler for sale (1,239)

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Length: 2,5 m Width: 1 m Height: 2,5 m Weight: 1700 kg Nedpfx Ajxbpg Hsiyeda Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Nsdpfox T Ai Isx Aiyeda Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Year of construction: 2001, condition: used, PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: PET bottle conveyor system Capacity: 24000 b/h Formats: 0,5, 1,0 l und 1,5 l PET-bottles Ndsdpfx Aiox T Amgjyoa Material: mainly stainless steel Position: free-standing on the floor / suspended from the ceiling Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Njdpfoquuv Iex Aiyjda Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No   Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux Nedjvguukspfx Aiyeda – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. Ndjdpovguphsfx Aiysa The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL Bordeaux. To sanitize the used line, they use disposable steam which still allows the taps \ central part to be washed well. Used wine filling line services: For this Complete Bottling Line used for the wine we can offer disassembly and packaging services, and reassembly in case of need. Furthermore, we can propose a new project for adding bottle format equipment in case of a new bottle shape. A maintenance service can be negotiated for this Complete Bottling Line and implemented in about 75 working days from the confirmation of the order. All replaced parts are warranted except Filters, fuses, lubricants and consumables in general; they are subject to ordinary or scheduled maintenance. The electrical components can be damaged by accidental electric shocks to the control panel and by the interruption of the general control. Damage due to the use of non-original parts. Used Complete Bottling Line for wine subject to prior sale.  

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. Nedpfxsvguwls Aiyeda The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 Ndodpfxovgvbrs Aiyea The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 Ndsdpfx Asvgt Ucjiyoa In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology Nedpfx Aiswgw Dgjyjda This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Nedpfxewa Tqis Aiysda Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Ndsdpfowahdqjx Aiyja Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Ndedpfjv U Ni Ssx Aiysa Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets Ndjdpovlgqhefx Aiyja TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder Nsdpfxsvgvl Ro Aiyjda The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights. Nedpfxovgvwmo Aiysda

Condition: used, Year of construction: 2006, operating hours: 4,000 h, functionality: fully functional, Used wine bottling line. Complete wine bottling line comprising the following machines, all manufactured in 2006: - Filling monoblock for the used wine bottling line: * AVE brand filler, Model: OCEANIC G 24/24/6 * Filling volume: 0.75L - 2L, with a filling rate of 5000 bottles/hour * AROL type 6-head corking machine * AROL type 3-head PET capping machine - Used capsule applicator: * AVE type, 4 heads, maximum speed 6000 bottles/hour. Formats: 0.75L - 1.5L - Used labeling machine: * AVE type, 3 stations. Formats handled: 0.75L - 2L - Used glass unloader, AVE type * 16 units - Furthermore, the line includes: * Nordson type case erector, case filler, and case closer machines * S.G.E. type palletizer, manufactured in 2002/06 Ndsdpsy Uiidjfx Aiyea - AVE type 16-track bottle washing machine - Conveyor belt, approximately 60 meters long.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Nedpfoyi Ezkox Aiyoda - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, total width: 1,600 mm, total length: 4,000 mm, total height: 2,600 mm, overall weight: 2,500 kg, year of last overhaul: 2023, We are offering this overhauled Markl Langrohr round filler 8/2 filling machine, year of construction approx. 1990. Markl 8/2 long-tube filler, completely overhauled. Comprehensively refurbished at the beginning of 2023, including a new gearbox. Filling capacity approx. 1,500 bottles/hour, depending on carbonation and temperature. Currently set up for 0.33l bottles. Year of manufacture unknown, approx. 1990. The machine can be upgraded to a total of 16 filling heads. HDE available. Includes rotary table at the infeed side. Nodpjyymgwsfx Aiyeda Outfeed equipped with conveyor belt and collecting table. The machine runs perfectly without any issues. Dimensions (LxWxH): 4,000 x 1,600 x 2,600 mm Power connection: 16 A Weight: approx. 2.5t Additionally included: - Unused conveyor guide, length 160 cm - Conversion kit for filling 0.5l bottles - Large number of spare parts, seals, etc. - 9m new, unused conveyor belt The machine will be available from the end of April! Price: negotiable, €52,000 net

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Nsdpfx Aoy Ef Tteiyeda

Condition: used, machine/vehicle number: LC618, Used Automatic 18.9L bottling line 500 BPHTechnical Specifications & Performance DataThis automatic bottling line is engineered specifically for large 18.9L bottles, delivering dependable performance for washing, disinfecting, filling, and capping. Designed as a complete, synchronized system, it provides consistent throughput and accurate operations across all stages.Production speed: 500 bottles per hourTotal output: 9450 liters per hourBottle format: 18.9LProcess stations: Washing, disinfecting, filling, cappingFilling heads: 6Operation: Fully automatic lineApplication: Ideal for high-volume, large-format bottle handlingAdvanced Automation & Control SystemsThe line operates with automated sequencing across each station to maintain stable throughput and reduce operator intervention. Controls support straightforward start/stop and changeover procedures to keep change times minimal and maximize uptime.Automatic cycle control for synchronized washing, disinfecting, filling, and cappingCentralized operator interface for status monitoring and adjustmentsSensors and interlocks to help ensure reliable bottle handling and cycle completionQuick setup for 18.9L format with consistent, repeatable settingsProduction Line Integration CapabilitiesThe system is designed to function as a complete line for 18.9L bottles and can be integrated with upstream and downstream handling equipment. Its layout supports straightforward connection to conveyors, accumulation, and packaging stations where required.Inline operation as a complete bottling unit for large-format containersCompatible with standard conveyor interfaces for infeed and dischargeOptimized handling for 18.9L bottles with stable transfer between stationsSuitable for beverage production where large bottles are requiredMachine Condition & Maintenance HistoryThe line has been barely used, limited to trial run operation only. It is fully functional, ready for testing, and in production-ready mode. This minimal use profile provides a strong opportunity for those seeking a second hand, used bottling line with near-new wear characteristics.Condition: Barely used (trial run only)Status: Fully functional and ready for testingOperational readiness: Production-ready configurationOperational Performance & VersatilityPurpose-built for 18.9L bottles, the system provides reliable cycle execution and steady output. The six-head filling section balances throughput with filling control appropriate for large volumes. Pre-filling treatment via washing and disinfecting helps support product quality within beverage production and industrial packaging workflows.Consistent performance for large-format bottle fillingIntegrated pre-treatment (wash and disinfect) prior to fillingAutomated capping aligned with 18.9L bottle handlingSuitable for beverage production environments requiring large containers Nedpfxey Ai Hfe Aiyjda

Condition: used, Year of construction: 2004, machine/vehicle number: LC617, Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomodul labeller, Krones Linapac autopacker, Krones Variocart C-40 case erectors (x2), Krones Variocol H-120 case sealer, Garvens E40-DMS checkweighers (x2), Videojet 3330 laser coders (x2)Years of manufacture (predominant): 2004 core line, with labeling and coding upgrades in 2015 and 2016Line scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packing, case forming and sealing, to conveyingAdvanced Automation & Control SystemsThe line features comprehensive automation across all stations to ensure stable, synchronized operation at 18,000 bph. Continuous multi-head capping from Zalkin enables consistent closure application. In-line inspection and weighing provide real-time quality control and automated rejection. Laser coding and case printing integrate seamlessly for traceability and compliance within beverage production.Integrated controls for coordinated machine operation and changeoversIn-line inspection (fill level/visual) and checkweighing with automatic rejectLaser coders for high-speed, permanent coding on glass containersEnd-of-line automation including autopacking, case forming, and sealingProduction Line Integration CapabilitiesEngineered as a cohesive, second hand packaging system, the line offers end-to-end integration and stable handling of glass bottles. It is suitable for spirits bottling with format flexibility across common 0.7L, 0.75L, and 1.0L sizes. The conveyor network covers container, pack, and pallet levels, supporting streamlined material flow and efficient accumulation.Inline operation from depalletizer to labeller and end-of-lineFormat flexibility across 0.7L, 0.75L, and 1.0LFull conveyor network for containers, packs, and palletsCompatible with additional upstream/downstream equipment as requiredMachine Condition & Maintenance HistoryThis used bottling line has been maintained to a very high standard with regular OEM servicing. It is currently in production with excellent operational performance and strong reliability. Availability is planned for October–November 2026, allowing for structured decommissi... Nedpfoyzz Hhsx Aiysda

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Nodpfx Aisxz Ehmoysda Weight: 1,500 kg Used machine

Condition: excellent (used), Year of construction: 2007, - Capacity: 10,000 bottles/hour - Year of manufacture: 2007 - Equipped with an ozone generator - Manufacturer: PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Two-channel sterilizer-rinser - With recirculation tank, pump, and filter - Nozzle heads: 36 pieces - With enclosed hood and ozone air extraction - Conveyor height: 1250 mm (including additional base supports) - Bottle formats: from 55 mm to 99.8 mm (total of 20 different bottle types) - Direction of travel: Left to right Dimensions: Nodjzb H Nmspfx Aiyeda - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper Nsdpfx Aievgva Uoyoda The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.