Complete Bottling Line

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Fsdoypbmijpfx Adaopd Tool changer: 8 positions EQUIPMENT Tools

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Fedpevcqlwsfx Adaepd Width: 1500 mm Height: 1500 mm Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Fpjdpfx Adoymx N Aoasd Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Fodpfx Adoymxynjajpd Connection for overflow Connection for level switch

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation. Fpedpsymxtzefx Adaed

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Fpedpfx Aoyttnaedajd Maximum sheet thickness (mild steel): 20 mm Maximum sheet thickness (stainless steel): 15 mm Maximum sheet thickness (aluminium): 10 mm Laser power: 4 kW MACHINE DETAILS Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Laser power: 4 kW Type: CO2 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Beam on hours: 28,459 h Laser on hours: 51,970 h Note: The machine is currently already dismantled.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Fpodpfeypcw Nex Adaed Max. speed of linear axes: up to 30 m/min Tool changer: 24 positions MACHINE DETAILS Control: Heidenhain TNC 426 PB Electrical connection: 400 V / 50 Hz Connected load: 32 kVA Fusing: 3x 63 A Weight: 8,500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades Fpjdpeypbx Ejfx Adasd

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Fpsdpfxsyn Imyo Adasd Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Fpedpeym Uu Usfx Adasd Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,118 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-Axis Travel: 762 mm Y-Axis Travel: 508 mm Z-Axis Travel: 508 mm Table Load: 300 kg Rotary Table Diameter: 500 mm Spindle Speed (max.): 12,000 rpm Spindle Motor Power: 22 kW Spindle Taper: BT40 Number of Tool Magazine Slots: 40 MACHINE DETAILS Fodpfjypbhtsx Adaopd CNC Control Manufacturer: HAAS Dimensions & Weight Dimensions (L x W x H): 4,014 x 3,046 x 3,048 mm Weight: 6,500 kg Operating Hours Power-On Hours: 16,142 h Machining Hours: 12,118 h EQUIPMENT Central spindle cooling system 20 bar Filtration Chip conveyor Workpiece probe Tool probe Robot interface Automatic (side) door Portable handwheel Cleaning gun High-speed machining