Used Babbitless 2350 for sale (273)

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Fodpeua Nngofx Aa Nsgb Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt Fjdpfx Askn Rz Hsa Negb throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm Fgsdpfx Asxt Idbsa Njb height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16100 € 309.12 € 100 to fix 300 mm 680 mm 1020 mm 8 mm/s 5 mm/s 10 mm/s 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2350 mm 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable Fodpfx Aajwiql As Nsgb according to CE regulations user manual in GERMAN and ENGLISH

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 19,118 h, load capacity: 3,500 kg, lifting height: 5,350 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 5,350 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 1,600 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 4,940 kg, Equipment: UVV, lighting, sideshift, Triplex mast with full free lift, overall height: 2350 mm, lift height: 5350 mm, fork positioner with sideshift, forks length: 1600 mm, LED work lights front and rear, VW LPG engine, double pedal foot control, 4x SE non-marking tires, operator’s manual included. NET PRICE: 11,900 EUR Technical condition at point of sale: Forklift is technically overhauled! Major service newly performed! UVV inspection newly passed with no defects! Delivery: In perfect condition! 20 years of professional experience! VIEWING AND TEST DRIVE: By appointment at any time during opening hours: Monday to Friday from 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low-loader or curtain-side truck available at a reasonable rate. Fjdpfjxqhgwox Aa Nsgb

Condition: new, Bernardo Gear column drilling machine GB 50 HS Drilling capacity in steel50 mmDrilling capacity in cast iron60 mmThread cutting max.M42Drill chuck1 - 13 mm / B 16Morse coneMK 4Spindle speed / number of steps40 - 2100 rpm / 12feed range0,1 / 0,2 / 0,3 / 0,4 mm/reach370 mmDistance spindle / table max.600 mmDistance spindle / base plate 1190 mmSleeve stroke 250 mmPillar diameter200 mmTable size / T-slot size 600 x 500 mm / 14 mmMotor power2,2 / 2,8 kWMachine dimensions (W x D x H) 700 x 1050 x 2350 mmWeight approx. 670 kgScope of supply - Toothed ring drill chuck 1 - 13 mm / B 16 drill chuck mandrel MK 4 / B 16 reduction sleeve MK 4 / 3, MK 4 / 2 - Motorised table stroke coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover Fgodpfx Ajd Tm T Hoa Njb

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) Fedpfx Aajvuugvo Negb with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: used, mileage: 3,77,000 km, power: 235 kW (319.51 HP), first registration: 02/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,500 mm, loading space width: 2,490 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, Manufacturer Scania Model P320 6x2?4 Carrier Supra 1250 Mt 9.50 m. box Year 2016 Condition Good Serial Number YS2P6X20005442786 Fgedjynq Dzepfx Aa Njb Ref. nr. 1218078 Reg. date: Hk: 320 Km: 377000 Gearbox: Opticruise GR875 Eurotype: 6 Diesel tank: 1 Tank liter: 400 Air conditioning: ? Cabin type: CP16 Navigation: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Front suspension: Air Suspension rear: Air Wheelbase: 5700 mm. Total weight: 26000 kg. Net weight: 13300 kg. Load capacity 12700 kg. Inside length: 9500 mm. Internal width: 2490 mm. Interior height: 2350 mm. Lift Brand: Palfinger Lift capacity: 2500 kg. Remote control: ? Refrigerator brand: Carrier Supra 1250 mt. Refrigerator year: 2016 Double compartment: ?

Condition: new, Year of construction: 2025, neu 2025 080091 prompt, Zwischenverkauf v Türkei 51120 € 966.17 € 1 60 to 2550 mm Y1 / Y2 und X Achse 160 mm 2150 mm 250 mm 350 mm hydraulisch 120 mm/s 9 mm/s 70 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 813 mm 104 mm 100 l 5.5 kW 3250 mm 1200 mm 2350 mm 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form Fgedpfxewva Igj Aa Nsb - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTIONS: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 68700 € 1298.43 € 3100 mm 13 mm 8 mm 50 mm 13 1/min 1.75 ° 16 37 to 1000 mm 200 mm/s 30 kW 330 l 2 Stk. 840 mm 600 mm 3550 mm 4280 mm 2300 mm 3600 mm 2350 mm 12500 kg Swing cut construction Fgjdpfxewir D Ho Aa Neb NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 4 Monate ab Auftragse Italien 66700 € 1260.63 € 150 to 500 mm 1.550 x 2.000 mm 800 mm 20 mm/s 3 mm/s 2350 mm 2000 mm 2500 mm 4100 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Fedpfswirpiex Aa Njgb Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm Fgsdpfx Aaeu Ixw Ae Nsb max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors Fgedpfx Aox R Eh Isa Neb - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Engine: 50 kW - Capacity approx.: 30,000 m3/h - Motor speed: 2960 rpm - Impeller blade height: 230 mm - Impeller speed: 2350 RPM - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg Fedpfx Asxyirmea Njgb

Condition: used, mileage: 1,58,900 km, power: 132 kW (179.47 HP), first registration: 03/2010, fuel type: diesel, empty load weight: 8,575 kg, maximum load weight: 3,415 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 3,100 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space volume: 16 m³, loading space length: 3,500 mm, loading space width: 2,350 mm, loading space height: 2,000 mm, Equipment: ABS, compressor, crane, cruise control, differential lock, low noise, onboard computer, MAN TGL 12.180 box truck with aerial work platform (municipal vehicle) First registration: 03/2010 Only 158,900 km Euro 5 emissions standard Short cab Manual transmission Leaf spring suspension Auxiliary heating Tires: 245/70 R17.5, tread approx. 70% Wheelbase: 3100 mm Body internal dimensions: length 3500 mm x width 2350 mm x height 2000 mm Fsdjymmiqepfx Aa Negb Vehicle length: 6800 mm Vehicle height: 3800 mm Permissible gross weight: 11,990 kg Unladen weight: 8,575 kg Aerial platform: Ruthmann Versalift VST-237-LF Working height: 14.90 meters Basket load: 265 kg + tools Insulated basket suitable for electrical work The vehicle is a municipal vehicle from first owner. Classified as a working machine and therefore exempt from tolls and environmental zones. TÜV valid until March 2027. Export / net price: €25,900 All information subject to change and errors excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Kubota KX016-4 mini excavator - year of production 2016 - documentation - 1115.4 mth TECHNICAL SPECIFICATIONS: Engine model KUBOTA-Diesel D782-BH Capacity 778 cm3 Engine power hp / rpm 13.0 / 2300 Fgodpfx Ast Uqb Ssa Njb Engine power kW / rpm 9.6 / 2300 Digging depth 2250 mm Lifting height 3360 mm Width 990 / 1240 mm Height with cab 2350 mm Height with canopy 2330 mm Bucket digging force 12.7 kN Digging force of arm 7,3 kN Flow l/min 27 l/min Max pressure Mpa ( kgf/cm2) 20.6 ( 210 ) Maximum travel speed 2.1 / 3.8 km/h Ground clearance 160 mm Weight 1540 kg

Condition: new, Laser performance: 6Loading Capacity: 1250precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 15coolant fittings: Wasserkühlerweight approx.: 17500messurements (LxWxH): 4400 x 9500 x 2350 mmMaximum speed: 120pipe diameter: 220Working Area: 2000 x 6000 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera Fgedpfx Aetwtn Iea Nsb SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Year of construction: 1983, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor Fedpfxjgwhvpe Aa Negb -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Condition: used, Transport trestle, steel trestle, heavy-duty rack -Execution: stable -Total height: 2720 mm -Support height: 2350 mm -Width: 3300 mm -Depth: 750 mm Fedpsb A Ii Hofx Aa Nogb -Weight: approx. 200 kg

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Fgjdpfxjulnbqs Aa Nob Extra storage on the hydraulic motor, Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: used, Year of construction: 1989, sheet width 2540 mm plate thickness 6 mm rear stop 900 mm down holder 14 Stk no. of strokes 20 Hub/min total power requirement 10 kW dimensions of the machine ca. 3100 x 2200 x 2600 mm weight 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm Fsdpfxsvg R Sfe Aa Nsgb - Front finger guard - Spare blade (used) - Foot switch

Condition: new, sheet width 2600 mm plate thickness 8,0 mm thickness at "Niro-steel" 5,0 mm down holder 12 Stück no. of strokes 18 Hub/min oil volume 200 ltr. cutting angle 1,5 ° engine output 15,0 kW weight of the machine ca. 6.300 kg Fedpsxab D Ijfx Aa Negb range L-W-H 3525 x 2350 x 1700 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, Year of construction: 2025, Schnittbereich rund: 230 mm Schnittbereich quadratisch (B x H): 310x230 mm Schneidebereich 45° rund: 210 mm Schneidebereich 45° flach (B x H): 210x210 mm Schneidebereich 60° rund: 140 mm Cutting range 60° flat (W x H): 140x140 mm kleinste zu schneidende Größe: 10x10 mm Kürzeste Reststücklänge im Einzelschnitt: 30 mm Kürzeste Reststücklänge im automatischen Betrieb*: 330 mm Length: 2350 mm Breite inkl. Späneförderer : 1750 mm Height: 1500 mm Höhe der Materialauflage: 895 mm Fgjdowzwg Rspfx Aa Njb Weight of machine approx.: 1150 kg Electrical connected load: 2,5 kW Leistung des Sägemotors: 1,5 kW Leistung hydraulischer Motor: 0,75 kW Schnittgeschwindigkeit stufenlos regelbar: 20-80 m / min Levelling speed: 1-300 mm / min Abmessungen des Sägebandes: 2910x27x0,9 mm Standard configuration CE standard safety guardIndividual valve feed controlCE electrical safetyLED work lightSaw blade breakage sensorInverterIndividual vise clampingManually movable guide armOne-piece saw blade

Condition: not inspected (used), Used Linear Oven Electric power supply Belt width: 600mm Manufacturer: Heat and Control Model: 25.21 Height: 2350 mm Width: 1600 mm Fgodpfxstr Du Sj Aa Nsb Length: 9500 mm Electric power supply: 400V 50Hz 3N Total power: 150 kW

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: Fgsdjwz Ev Tspfx Aa Nob 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.