Used Biesse Selco Eb75 for sale (382)

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group Lhedpfxjr Ip Sdj Ab Uol

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Lhsdpfx Aougpwnsb Usl Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination Lhedpfx Aju Rim Hsb Usl * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Lodpfx Absw D E A Eo Ushl

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Lhedpekvrxuefx Ab Uel Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Lodpfet Ul Dnex Ab Uehl Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Used BIESSE STREAM A 6.0 - Year of manufacture: 2018 - AirForce system (zero-gap) - Availability: August 2026 - Smart Touch - Edge milling unit Lhjdpsy S E Nnefx Ab Ujl - Gluing unit - Crosscut unit (2-motor) - Flush trimming unit - Fine milling unit - Profile milling unit (2-motor) - Pull knives (profile & flat) - Scraper unit - Separate glue tank - Up to 25 m/min - Machine length approx. 7500 mm - Weight 3800 kg - More pictures and a video are available, please inquire.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a Biesse BREMA EKO 2.2 machine, manufactured in 2021, in excellent condition. The machine includes tool changing, two drilling units, and a complete set of tools. It features bSolid software. Lhodpfjzcrfpex Ab Uol The machine has been serviced by our technician, so we are fully aware of its condition and history. The machine can be tested at our showroom in Brno.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Lhjdpfxozuyxys Ab Uol Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Ljdpfx Abezuyxms Uohl Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Ljdpfozuyixjx Ab Uohl Year of manufacture: 2017 Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: used, Year of construction: 2018, Edge banding machine Manufacturer: Biesse Type: Jade 340 Year of manufacture: 2018 Technical data - Workpiece thickness: 10 - 60 mm - Edge height: 14 - 64 mm - Edge thickness: 0.4 - 8 mm - Feed rate: 12 m/min Biesse HD touchscreen control unit Units - Pre-milling unit - Glue application unit - Additional interchangeable glue pot - Trimming unit - Corner rounding unit - Flush trimming blade and profile trimming blade - Polishing unit - Release agent spray unit Lhedpfx Aozux Tvob Uel Operating hours as of May 14, 2026: 4832 hours.

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap Lhjdpfxozux Nwe Ab Uel - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Ledezuwyzspfx Ab Ushl Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Drilling unit: Technical data - Nut saw Lhsdpfx Aszuwxdjb Uel - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B Lhjdpjzuygqjfx Ab Uel • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table Lhsdpfjzutrtox Ab Uel - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet Lhsdezutrajpfx Ab Uol 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: used, Technical Specifications - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW Lodpfx Abezutq Aj Uohl - Total power consumption: 20 kW

Condition: used, Technical specifications: - X = 3,060 mm - Y = 1,320 mm - Z = 150 mm - Central automatic lubrication system - 6 ATS workpiece supports - 18 bearing consoles - Vacuum system with division into 2 working areas in the X-direction - Pneumatic system for console adjustment - 2 independent working areas in the X-direction - 4 workpiece supports - 12 clamping devices for clamping narrow workpieces - Conveyor belt for removing chips and cutting waste - Vacuum pump, 90 m³/h - 12 kW electric spindle with ISO 30 tool holder, air-cooled - The machine is additionally equipped with an integrated rotary unit that is integrated into the machine control system and functions as a 5th axis for drilling operations at different angles. - Tool changer with 10 tool positions - Manual laser barcode scanner Drilling unit BH 21L Lhjdezutqvepfx Ab Uol - 7 + 7 vertical drilling spindles - 6 horizontal drilling spindles (4 in the X-direction, 2 in the Y-direction) - 1 grooving unit (saw blade) in the X-direction

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Work table: Nesting table Software: bSolid Lodpfx Ajzccfysb Ujhl 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Weight approx. 3700 kg. Available January 2027

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Ledpfozuwt Ijx Ab Uohl Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) Lsdpfezuhd Rsx Ab Uohl • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026. Ljdpfx Ajzug Smsb Ushl

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 378 mm, number of axes: 3, spindle motor power: 13,200 W, spindle speed (max.): 24,000 rpm, This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. • Maximum piece clearance: 170 mm • Axis speeds: X 85 m/min, Y 60 m/min, Z 20 m/min • Base: Electro-welded closed-circuit structure with high-thickness steel plates • Axis drives: X with two independent brushless motors and helical rack & pinion; Z with preloaded ballscrew, ISO5 precision • Work table: Phenolic laminate with 30 mm grid vacuum system; vacuum steps every 150 mm; M8 threaded inserts for templates/fixtures • Main electrospindle: 13.2 kW (17.7 HP), HSK F63, air-cooled, 1,000–24,000 rpm • Tool magazine: 8-position revolver on Y-carriage; max tool diameter 110 mm; max tool weight 7.5 kg (32 kg total magazine) • Tool measurement: Digital presetter for tool length measurement up to 130 mm diameter • Control system: BH660 PC-based with Windows Real Time (WRT); CPU Intel Core i5 or better; 8 GB RAM; 128 GB SSD or better; 21.5" LCD monitor • Power supply: 380/400/415 V, 50/60 Hz • Automatic lubrication system for moving parts • Software: bSolid 3D CAD-CAM for design, simulation, and process management • Connectivity: Industry 4.0 integration via TCP/IP and OPC-UA Lhedpfxjzug N Sj Ab Uel Additional equipment • Vacuum pump: 250 m³/h, dry-running • Air conditioner for the electrical cabinet • Safety guarding: 2 m high protection nets and front vertical photocells