Used Anfas for sale (58)

Condition: new, power: 350 kW (475.87 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,500 mm, loading space height: 600 mm, total width: 2,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Internal reference number for inquiries: 2-252 / AVAILABLE IMMEDIATELY! ----MERCEDES-BENZ ACTROS 2548 L CONTAINER FLATBED WITH POWER CRANE FASSI F545RA.2.28 xe-dynamic Loader Crane: * FASSI F545RA.2.28 xe-dynamic: Lifting capacity at 20.8 m is 1,650 kg (can be extended with 2 manual extensions to 24.9 m and 700 kg) * Endless slewing range * Double knuckle boom system with PROLINK (overbending knuckle boom up to 15 degrees) * FASSI stability control * Radio remote control with linear levers and boom pressure display * XF system (Extra Fast) * XP system (Extra Power) * FL system (Full Lift) * Outriggers operable via remote control * LED work lights * Preparation for winch (winch can be retrofitted at any time, Fassi V30 model) * and much more Vehicle: * Flatbed loading length 6,500 mm, loading width 2,480 mm * External frame profile made of steel with lashing points every approx. 250 mm * Side boarder in aluminium SL profile * 4x container locks as LAXO model sliding locks with locking pins, galvanized, extendable for 3 m containers * Extendable oversize marker with position lights * Tool box 1,200 x 600 x 600 mm * Chain box 800 x 600 x 300 mm * L CABIN STREAMSPACE, 2.50 M, LEVEL FLOOR * ENGINE OM471, R6, 12.8 L, 350 KW (476 HP), 2,300 Nm * HIGH PERFORMANCE ENGINE BRAKE * SECONDARY WATER RETARDER * TRANSMISSION G 281-12/14.93-1.0, MERCEDES POWERSHIFT 3 * TRAILING AXLE, 8 T, STEERABLE, LIFTABLE, UNLOADING * AIR/AIR SUSPENSION * DRIVE 6X2 * FUEL TANK 630 L, ADBLUE TANK 60 L * CENTRAL AXLE TRAILER COUPLING, D50, RINGFEDER * DRIVER’S AIR SUSPENSION COMFORT SEAT * COMFORT BED, LOWER * REFRIGERATOR Kedpfx Aexnn Eujabsdu * LEATHER STEERING WHEEL * SUN BLIND, ONE-PIECE, ELECTRIC, WINDSCREEN * MULTIMEDIA COCKPIT, INTERACTIVE * DIGITAL RADIO * NAVIGATION SYSTEM * LED DAYTIME RUNNING LIGHTS * PREDICTIVE POWERTRAIN CONTROL * LANE KEEP ASSIST * ADAPTIVE CRUISE CONTROL * ATTENTION ASSIST * TRAFFIC SIGN ASSIST * ACTIVE BRAKE ASSIST 5 * CRUISE CONTROL * HILL START ASSIST, SPEED LIMITER 30 KM/H * ATS WARRANTY ACCORDING TO TERMS AND CONDITIONS, 3 YEARS/450,000 KM * Much more Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: used, mileage: 3,79,100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, color: beige, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 11/2017, emission class: euro6, brakes: retarder, loading space length: 6,100 mm, loading space width: 2,460 mm, loading space height: 970 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Scania R500 construction material trailer with Schwarzmüller two-way tipper Crane: Fassi F215 AS with two hydraulic extensions, stone grab, and raised seat !!! REAR AXLE STEERED!!! Kdjdpfx Aor Dpiveabeu Retarder, exterior sun visor, lane departure warning, adaptive cruise control, trailer hitch, aluminum rims, cool box, 1x bed, multifunction steering wheel, differential lock, auxiliary heating, radio with Bluetooth and hands-free system, EURO 6, ABS, 2x electric windows, electric mirrors. Payload: 10,300 kg Front axle: AIR SUSPENSION Rear axle: AIR SUSPENSION Trailing axle: AIR SUSPENSION + STEERED + LIFTABLE Internal dimensions: Length: 6.10 meters Width: 2.46 meters Height: 97 cm

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min Kdodpoppgcvofx Aabju range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: used, mileage: 1,43,000 km, power: 185 kW (251.53 HP), gearing type: mechanical, fuel type: diesel, color: green, overall weight: 15,000 kg, axle configuration: 2 axles, first registration: 05/2015, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), * IVECO 150E25 4x4 tipper with crane * Meiller double-side tipper body * Rear crane Fassi F70A.0.22 * Radio remote control * Clamshell bucket (grab) * Euro6 * Manual gearbox * Leaf spring suspension (front and rear) Kdedpfx Aajw Iknmobju * Trailer coupling * 3-seater cab * Air conditioning * Electric windows

Condition: new, mileage: 400 km, power: 367 kW (498.98 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 6x6x6 all-wheel drive with Fassi crane with jib and winch New vehicle with daily registration 07/2024 Long-haulage cab Removable flatbed Can be used as a tractor unit Tatra specifications coming soon Crane: Fassi F545RA2.27 Stability control V7 remote control Jib / auxiliary boom L214, 4-way V20 winch with 60 m cable AWC Front outriggers 5-way outriggers etc. Kdjdpfx Aexmn Itoabou Further information coming soon.

Condition: excellent (used), mileage: 18,730 km, power: 129 kW (175.39 HP), first registration: 12/2020, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2020, Equipment: crane, soot filter, trailer coupling, = Additional options and accessories = - Leaf suspension - Brake servo - Electric windows - Remote central locking - Low noise emissions - Fog lights - Particulate filter - Radio/CD player - Side door - Toolbox = Further information = Technical information AdBlue system: Yes Suspension: Leaf suspension Front axle: Steering axle Weights Unladen weight: 4,460 kg Payload: 3,030 kg Gross vehicle weight: 7,490 kg Functionality Crane: Fassi F50A, year of manufacture 2020, located behind the cab Maintenance, history, and condition APK (general inspection): valid until 10/2026 Technical condition: very good Optical condition: very good Identification Reference number: 05 Further information For more information, please contact Emad Al Shogran. Vehicle number: 05 Mitsubishi Fuso 7C18 / Tipper with Fassi F50A crane / Euro 6d .: TYBFEB71ELDC06540 TÜV: 10/2026 Suspension: leaf / leaf Transmission: manual gearbox Engine brake Cruise control Distance assist Lane keeping assist Tow hitch Emission standard EURO 6d Ksdpfx Aasxmgh Ejbjdu 3-way tipper Crane: Brand: Fassi Type: F50A Year: 2020 = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Contact: Mrs. Sabine Faust Email:

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 5,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 5-060 ---- Ideal for low loader transport, etc.! Towing capacity 30,000 kg! MAN TGS 28.480 6x4-4 BL THREE-WAY TIPPER WITH FASSI F195 LOADER CRANE Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic four-section extension 12.7 m * e-dynamic hose equipment for two auxiliary devices * Slewing range 400° * Double knuckle system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload cut-off with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control Kodpfx Aoxnn Txoabjdu * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: * Leaf/air suspension * Drive 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic gearbox * MAN TipMatic operation, with steering-column lever, manual (DNR selection, shift strategy selection) * Front axle as hub reduction axle, driven, selectable * Trailing axle, 9,000 kg, non-driven, steered, liftable * Differential locks on driven rear axle + front axle * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axle and trailing axle * 310-litre fuel tank, 35-litre AdBlue tank * Digital axle load display (ALM) for air-suspended axles * Cab NN: the practical one (narrow, medium-length, standard height) * Sunblind for windscreen, inside, electric * Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl control panel, 2 functions, operable from outside when the door is open * MAN Mediasystem Navigation Professional 12.3 inch * Navigation map Europe and Russia * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard driveline extended warranty for 3rd year of operation up to 450,000 km, conditions as per service record * And much more. Superstructure: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers via radio operation, work lighting, etc.) Drop Side Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load space length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Substructure: Robust steel welded construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A fixed 1,000 mm high steel front wall with 2 lashing rings inside, positioned at each outer side at half height. Corner posts fixed, with lower locks. Rear and side walls (single piece over entire length) made of aluminium hollow profiles; side walls foldable and swinging with tailboard lift assist. Tailgate also foldable and swinging, centrally locked into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, neatly welded to the tipper profile and longitudinal/cross members. Ram crosstube and tipper bracket set into the longitudinal members and accordingly reinforced. Lashing rings (4 per side) are mounted externally on the tipper floor, distributed along the length. Steel construction executed in St 52-3. All steel parts are sandblasted, body parts in RAL 9016.

Condition: used, mileage: 3,79,100 km, power: 368 kW (500.34 HP), overall weight: 26,000 kg, fuel type: diesel, color: beige, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,460 mm, loading space length: 6,100 mm, loading space height: 970 mm, first registration: 11/2017, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Scania R500 Construction Material Trailer with Schwarzmüller 2-Way Tipper Kdodjt E Id Eopfx Aabou Crane: Fassi F215 AS with 2 hydraulic extensions, stone grab, and raised seat !!! REAR AXLE STEERED!!! Retarder, exterior sun visor, lane departure warning, adaptive cruise control, trailer hitch, aluminum rims, cool box, 1x bed, multifunction steering wheel, differential lock, auxiliary heating, radio with Bluetooth and hands-free system, EURO 6, ABS, 2x electric windows, electric mirrors. Front axle: AIR SUSPENSION Rear axle: AIR SUSPENSION Trailing axle: AIR SUSPENSION + STEERED + LIFTABLE Payload: 10,300 kg Internal dimensions: Length: 6.10 meters Width: 2.46 meters Height: 97 cm

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed Kdodpor I E Exefx Aabju * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle steered * Removable flatbed, including stake pockets and container lock * Movable fifth wheel coupling * Long-haul cab * Air suspension * Trailer coupling * Fassi F800 RA2.28 crane from 2007, completely overhauled * UVV (German accident prevention regulations) * 8-way extension * 360° front outriggers - 100% * Without outrigger monitoring * Cable winch preparation, delivery with cable winch available upon request (+13,000.00 €) * Storage box * etc. Ksdpfx Aaswd Appebjdu * Further information and the complete equipment are available upon request

Condition: new, power: 346 kW (470.43 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number for customer inquiries: 1546 / IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 construction material platform truck with PALFINGER PK 22002 EH or FASSI F235 loading crane, IMMEDIATELY AVAILABLE! PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil feed-through - Double knuckle with Power Link Plus 15° - Slewing mechanism with swing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at the support cylinders - Spiral hose from base frame to main boom - Level indicator at both control stands - Available with 4-stage and 6-stage extension ex stock or Fassi F235 loading crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double knuckle-boom system with PROLINK (overbending jib up to 15°) * Electronic overload cut-off system with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (90% and 100%), including adjustable digital slewing limiter * FASSI stability control FSC including LMB II * Control unit for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extension ex stock Superstructure: * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Sideboards: each side split once (2 drop-sides), with sideboard relief * Substructure: galvanized lattice frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed platform with crane * Diesel engine MAN 02676 LFAI, 346 kW (470 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * MAN EVBec high performance engine brake, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, wheelbase between rear and trailing axle 1,350 mm * Fuel tank volume 590 L, AdBlue tank volume 60 L * Trailing axle steerable and liftable * Trailer coupling RINGFEDER type 4040/G150B, 40 mm towing ring * GM cab: the spacious one (wide, long, medium height) Kdjdpfx Aexnn Iijabsu * Mattress comfort bed, lower, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment * Glass tilt roof, electric * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard drivetrain warranty for the 3rd operational year up to 450,000 km, see maintenance certificate for details * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed Kedpfx Aask Egrtebsdu The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle steered * Removable flatbed, including stake pockets and container lock * Movable fifth wheel coupling * Long-haul cab * Air suspension * Trailer coupling * Fassi F800 RA2.28 crane from 2007, completely overhauled Kedpfowd Apijx Aabodu * UVV (German accident prevention regulations) * 8-way extension * 360° front outriggers - 100% * Without outrigger monitoring * Cable winch preparation, delivery with cable winch available upon request (+13,000.00 €) * Storage box * etc. * Further information and the complete equipment are available upon request

Condition: new, power: 235 kW (319.51 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,000 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 5-006 / Immediately available ---- AVAILABLE NOW AT SPECIAL PROMOTIONAL PRICE MAN TGM 18.320 4x4 BB WITH MEILLER-TRIGENIUS TIPPER BODY WITH FASSI OR PALFINGER CRANE A vehicle suitable for landscaping, road construction, site operations, or as a municipal service vehicle! (ALSO AVAILABLE IN ORANGE) FASSI F135AC.0.24 dynamic (4-stage extension) * Maximum outreach: 10.85 m * Slewing range: 390° * Outrigger spread: 4.37 m, hydraulic extension * All hydraulic cylinders double-acting * Piston rods hard-chromed * Electronic overload shut-off device with FX500 emergency STOP and visual alarm at 90% and 100% * FASSI Stability Control FSC-M/1 incl. LMB II pressure limiting and load-holding valves * Control block with 4 control valves, operable from both sides * Controls for 2 additional functions with 2 hose guides, e.g. for grab operation * Fassi RCS maxi radio remote control – 6 functions with 3 joysticks (2-2-2) * 1 LED work light mounted on the articulated arm * Working lights can be operated via RCH / display (1 b/w function) * Working lights Alternatively, the following loading crane is available: Kdjdpjxnn Ivjfx Aabsu * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID TRUCK-MOUNTED CRANE with KTL coating * Hydraulic four-fold extension – 11.7 m * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. emergency STOP and load indicator * Operating hours counter with service interval indicator * Scanreco remote control * LOAD and overload display PALTRONIC at the radio control panel * 5 selectable speeds Vehicle: * MAN TGM 18.320 4X4 BB loader crane tipper * Tipper body 4200x2420 mm, make MEILLER, type TRIGENIUS (new model series) * Bulkhead height: 800 mm * Sideboard height: 600 mm * Fully retractable lashing rings in the platform floor * Cab type CC: the compact (narrow, short, standard height) * Wheelbase: 3,875 mm * Spring suspension front/rear (can also be leaf/air suspension at the front) * Drive: 4x2 * Tires: front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 * GVW: 18,000 kg * MAN TipMatic automatic transmission * MAN D0836 LFLAP diesel engine, 235 kW (320 hp), 1,250 Nm torque, Euro 6e * Transmission feature: EfficientRoll * Cruise control * Rear axle differential lock * MEILLER axial pump 270/45 * Tipper operation from driver’s cab * MAN EasyControl control panel, 4 functions, can be operated externally when the door is open * Ringfeder trailer coupling type 4040/G150B * Dual-line brake connection at frame end * Sun visor in front of windshield * Central locking with remote * MAN Media System Navigation Advanced 7 inch * Online traffic info for navigation * Smartphone integration * Heated and electrically adjustable rear and wide-angle mirrors * Air-suspended driver comfort seat with lumbar support, shoulder adjustment and heating * Adjustable driver’s seat belt height * 2 work lights on cab roof * 2 halogen rotating beacons on cab roof * And much more Financing, leasing, or hire purchase available. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications.

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° Kdjdpfxjk Uqhas Aabou plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 22-22/IMMEDIATELY AVAILABLE ---- MAN TGX 26.520 Construction Flatbed with FASSI F235 Loader Crane IMMEDIATELY AVAILABLE! Loader Crane: FASSI F235A.2.24 e-dynamic * Control system for 2 additional functions with 2 hose guides Kedpjxnn Tlsfx Aabsdu * Lifting moment 189.0 kNm (20.9 mt) * Lifting capacity: 1,345 kg at 12.7 m * All hydraulic cylinders double-acting * Double-linkage system with PROLINK (articulated jib extendable up to 15°) * Electronic overload protection with FX500 * FASSI Stability Control (FSC) incl. LMB II * RCS radio remote control * LED work lights, operable via RCS / display * FL-System (Full Lift) engageable fast-acting valve for extensions Body: * Flatbed dimensions: 6,600 x 2,480 x 1,000 mm * Sideboards: split once (2 flaps) per side, with sidewall assistance * Subframe: hot-dip galvanized grid frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed with crane * MAN D2676 LFAF diesel engine, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Protected disc brakes, suitable for off-road use * 6x2-4 drive * Leaf/air suspension (BL) * 4,800 mm main wheelbase, 1,350 mm distance between rear axle and tag axle * 590 L fuel tank, 60 L AdBlue tank * Steerable and liftable tag axle * RINGFEDER (Type 4040/G150B) trailer coupling, 40 mm towing eye * GM cab: spacious (wide, long, medium height) * Comfort mattress, lower berth, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment * Electric glass sunroof * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside when door is open * MAN Media System Navigation Professional 12.3-inch * MAN Advanced Sound System with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct entry keys * Lane Departure Warning (LDW) * MAN AttentionGuard alertness assistant * Emergency Brake Assist (EBA) * Standard driveline warranty for 3rd year of operation up to 450,000 km, see maintenance log for details * and much more Financing / hire purchase as well as leasing / partial amortisation leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials Kdedpfx Aaeppgcrjbou * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, power: 350 kW (475.87 HP), overall weight: 26,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,500 mm, loading space height: 600 mm, total width: 2,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Internal reference number for inquiries: 1224/Reference vehicle---- MERCEDES-BENZ ACTROS 2548 L CONTAINER FLATBED WITH POWER CRANE FASSI F545RA.2.28 xe-dynamic Loader crane: * FASSI F545RA.2.28 xe-dynamic – at 20.8 m this crane still lifts 1,650 kg (extendable with 2 manual extensions up to 24.9 m and 700 kg) * Slewing range: continuous rotation * Double knuckle lever system with PROLINK (overbendable knuckle boom up to 15 degrees) * FASSI stability control * Radio remote control with linear levers and reach display Kdedsxnn R Dopfx Aabou * XF system (Extra Fast) * XP system (Extra Power) * FL system (Full Lift) * Outriggers can be operated via radio control * LED work lights * Preparation for winch (winch of model Fassi V30 can be fully retrofitted at any time) * and much more Vehicle: * Flatbed loading length 6,500 mm, loading width 2,480 mm * Outer frame profile made of steel with lashing points spaced approx. every 250 mm * Drop side perimeter in Alu-SL profile * 4x container locks as sliding extensions, LAXO model, with plug pins, galvanized, extendable for 3 m containers * Extendable over-width markers with position lights * Toolbox 1,200 x 600 x 600 mm * Chain box 800 x 600 x 300 mm * L DRIVER CAB STREAMSPACE, 2.50 m, FLAT FLOOR * ENGINE OM471, R6, 12.8 L, 350 kW (476 HP), 2,300 Nm * HIGH PERFORMANCE ENGINE BRAKE * SECONDARY WATER RETARDER * GEARBOX G 281-12/14.93-1,0, MERCEDES POWERSHIFT 3 * TRAILING AXLE, 8 t, STEERED, LIFTABLE, UNLOADABLE * SUSPENSION AIR/AIR * DRIVE 6x2 * TANK 630 L, ADBLUE TANK 60 L * CENTRAL AXLE TRAILER COUPLING, D50, RINGFEDER * DRIVER'S AIR SUSPENSION SEAT, COMFORT * LOWER COMFORT BED * REFRIGERATOR * LEATHER STEERING WHEEL * SUN BLIND, ONE-PIECE, ELECTRIC, WINDSCREEN * MULTIMEDIA COCKPIT, INTERACTIVE * DIGITAL RADIO * NAVIGATION SYSTEM * LED DAYTIME RUNNING LIGHTS * PREDICTIVE POWERTRAIN CONTROL * LANE KEEPING ASSIST * DISTANCE KEEPING ASSIST * ATTENTION ASSIST * TRAFFIC SIGN ASSIST * ACTIVE BRAKE ASSIST 5 * CRUISE CONTROL * HILL START ASSIST, SPEED LIMIT 30 KM/H * ATS WARRANTY UNDER TERMS & CONDITIONS, 3 YEARS/450,000 KM * and much more Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Kodpfx Asppgcyjabsdu Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, power: 412 kW (560.16 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 3-488----SCANIA R 560 building material transport vehicle with loading crane Loading crane: * FASSI F255RA.2.24 xe-dynamic (continuous slewing) Ksdpfxexnnvao Aabsdu * Max. lifting moment: 196 kNm * Max. outreach: 12.4 m with 1,415 kg lifting capacity * Endless slewing range * Double-acting hydraulic cylinders * FL system (Full Lift): switchable high-speed valve for extensions * Control unit for 2 additional functions with 2 hose tracks, e-active * Double knuckle boom with PROLINK (articulated arm extendable up to 15°) * Electronic overload protection with FX500 * 6-function RCH or RCS radio remote control (linear levers) with display, ADC, and XP system * FASSI stability control FSC incl. LMB II * Danfoss D850 control block * Special control valves for functions: slewing, lifting, articulation * Lateral outreach 6.64 m hydraulically extendable incl. FSC * Fassi RCS Radio MAXI – 6 functions with 3 joysticks (2-2-2) * Work lights controllable via RCS/display Superstructure: PAVIC * Platform dimensions: 6,600 x 2,480 x 1,000 mm, side walls divided once (2 drop sides) per side, with side wall relief * Subframe: hot-dip galvanized lattice frame * 45° outer frame with perforated frame for optimal load securing * Center lashing rail Vehicle Description: * Scania R 560 * Engine DC13 166, 560 HP, SCR Euro 6 E * Transmission: GRS905S * Opticruise, automated gearshift for manual gearbox * Scania R4100D retarder with freewheeling function * Differential lock * Eco-Roll function, predictive cruise control * Suspension: leaf/air * Wheelbase: 4,750 mm * Drive: 6x2-4 * 3rd axle steered and liftable * Tires: front 385/65R22.5, rear + trailing 315/80R22.5 * Trailer coupling Rockinger 500B66000, 50 mm, D=200 kN * Cab: CR20H Scania Highline, R series sleeper cab with high roof * LED headlights * LED daytime running/position/marker/outline/license plate lights * Leather premium driver's seat with heating and ventilation * Bunk 800x2000 mm with pocket spring mattress * Flattened leather steering wheel * Automatic climate control * Auxiliary heater * Refrigerator * Premium infotainment system with 7" display * Radio with digital reception (DAB) * Truck navigation with European maps * Lane change warning system * Adaptive cruise control with active prediction (CCAP) * Emergency brake assistant (AEB) * ...and much more Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: new, Model Name Kdsdpfxek Au Dre Aabju B3 Entgrat-/Anfasmaschine

Condition: new, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 1-705 / In preparation (in advance) ---- MAN TGS 26.440 6x2H-4 BL Three-way tipper with FASSI F195A.2.24 E-DYNAMIC loader crane Loader crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Four-stage hydraulic extension, 12.7 m * E-dynamic hose configuration for 2 auxiliary devices * Slew range 400° * Double linkage system with PROLINK (articulated arm extendable up to 15°) * Electronic overload shutdown system with FX 500 * FASSI Stability Control (FSC) incl. LMB II * Fassi RCS remote control maxi - 6 functions with 3 joysticks (2-2-2) * Special outriggers, support width 6.64 m, hydraulically extendable incl. FSC Kdedpsxnnwkofx Aabsu * Outriggers operable via remote control * FL System (Full Lift) activatable fast-travel valve for extensions * LED work lights Vehicle: * Diesel engine MAN D2676 LFAJ, 324 kW (440 HP) power, 2,200 Nm torque, Euro 6e * Automatic gearbox MAN TipMatic 12.24 OD * 6x2H-4 MAN HydroDrive, hydrostatic front axle drive * Wheelbase 3,600 + 1,350 mm * Suspension: leaf/air * RINGFEDER 40mm trailer coupling Type 4040/G150A (Optional upgrade for ø50mm) * 2-line trailer brake connections, DuoMatic coupling * 390 l fuel tank capacity, 60 l AdBlue tank * High-performance engine brake MAN Turbo EVBec, adjustable * Differential lock on driven rear axle * Trailing axle, 9,000 kg, non-driven, straight, steerable, liftable * Preparation for 2 cameras, one camera connected to reverse gear * Cab type NN: the practical (narrow, medium length, standard height) * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * Sun visor for windshield, inside, electric * Cool box * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3-inch * MAN Advanced sound system Superstructure: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic support legs via remote system, work lights, etc.) Flatbed: * Dimensions LxWxH 4,800 mm x 2,420 mm x 800 mm * (Alternatively also available: load bay length 5,200 mm x 2,420 mm x 800 mm) * Front wall height 1,000 mm Subframe: Subframe as robust welded steel construction, two longitudinal members with cross members accepting the 5 mm tipper profile and 4 mm floor plate made from Hardox or Naxtra. A 1,000 mm high fixed steel front wall. Corner stanchions fixed, with bottom locks. Rear and side walls (one piece over the entire length) made from aluminum hollow profiles, side walls can be folded down and are swinging with drop-side assistance. Rear gate also folding and swinging mounted, with central locking integrated in the tipper profile. Floor plate made from Hardox or Naxtra, 4 mm thick, precisely welded to the tipper profile and the longitudinal/cross members. Ram traverse and tipping bracket recessed and reinforced in the longitudinal members. Lashing eyes (4 per side) mounted externally along the tipper floor. Steel structure made from St 52-3. All steel parts are sandblasted, body components painted or powder-coated in RAL 9016 single color. Subframe: Subframe accepts front and rear tipping brackets, with ram traverse and cross members. Closed box section in crane mounting area with side crane mounting plates. Plastic k

Condition: new, Model Name Kdsdpfxek D Nyie Aabju Anfassystem UZ12 ULTRALIGHT

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference for customer inquiries: 4-042 ----! ! ! IMMEDIATELY AVAILABLE ! ! ! MAN TGS 26.480 BUILDING MATERIAL TRUCK WITH REAR-MOUNTED CRANE BY FASSI OR PALFINGER Optionally available: also 520 HP in stock! Vehicle: Flatbed with Crane * MAN 02676 LFAI diesel engine, 480 HP, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated transmission with Retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * 6x2-4 drive * Suspension: leaf/air (BL) * Main wheelbase: 4,800 mm, wheelbase between rear axle and trailing axle: 1,350 mm * Fuel tank capacity: 590 L, AdBlue tank: 60 L * Steerable and liftable trailing axle * RINGFEDER trailer coupling, type 4040/G150B * Cab NN: the practical (narrow, medium length, standard height) * Refrigerator * Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment * Electric glass sunroof * Electric interior sun blind for windscreen * LED lighting * MAN EasyControl control panel, 2 functions, can be operated from outside with door open * MAN Media System Navigation Advanced 7-inch * MAN Soundsystem Advanced * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane Departure Warning (LDW) * MAN AttentionGuard driver attention warning * Emergency Brake Assist (EBA) * Standard drive train warranty in the 3rd year up to 450,000 km, see maintenance log for details * And much more Body: Flatbed: dimensions 6,600 x 2,480 x 1,000 mm, side walls split once (2 flaps) per side, with side wall relief * Standard floor panel made of glued, Finnish multiplex board, 30 mm thick, screwed to outer frame with 45° perforation and cross members. Edges sealed against moisture penetration. * Lashing rail recessed centrally in the direction of travel * 4 work lights * Toolbox Kdjdpfxexnnzio Aabou PK 22002-EH ? PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED LOADER CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification: HC1 HD4/B3 according to EN12999 - Fast-acting extension system with oil regeneration and internal oil routing - Double linkage with Power Link Plus 15° - Slewing mechanism with slewing cylinders - Slewing range: 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves on outrigger cylinders - Spiral hose from base frame to main boom - Spirit level at both control stations - Available with 4-section and 6-section boom extensions or Fassi F235 Loader Crane: * F235A.2 e-dynamic * Load capacity at 12.7 m: 1,345 kg; at 17.1 m: 740 kg * Slewing range: 400° * Double linkage system with PROLINK (over-bendable knuckle arm up to 15°) * Electronic overload switch-off with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and optical alarm (90% and 100%) including digital slewing limitation adjustable * FASSI stability control FSC incl. LMB II * Hydraulic control for 2 additional functions with 2 hose guides / e-dynamic * Available with 4-section and 6-section boom extensions Financing / lease-purchase as well as leasing / partial amortization leasing possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: new, Model Name Kdsdpfxok Au Dvs Aabeu Anfassystem B22 ZERO