Used Buldog 7 for sale (26,917)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets Nsdpfx Asuxfu Nshnjlf New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), mileage: 3,09,518 km, first registration: 10/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,450 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2018, operating hours: 788 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Power brake booster - Low noise emission - Speed limiter - Refrigerator - LED lights - Alloy wheels - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control Njdpfx Ahouxu S Rjnjlf - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Further information = Axle configuration: Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Weights: Unladen weight: 16,875 kg Functional: Mast: Telescopic (7 sections) Mast length: 20.8 m Lifting capacity: 9,400 kg Lifting height: 2,080 cm Crane: HIAB X-HIPRO 302 E-7, year 2018, mounted behind the cab Superstructure brand: HIAB X-HIPRO 302 E-7 CE marking: Yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request MAN TGX 35.500 8X4 TRIDEM + HIAB X-HIPRO 302 E-7 CRANE EURO 6 | PACKAGE | 500 HP DRIVE 8X4 TRIDEM LAST AXLE IS LIFTABLE AND STEERABLE WHEELBASE 420 CM AIR SUSPENSION TGX SLEEPER CAB WITH AIR CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR AUTOMATIC TRANSMISSION TRAILER COUPLING TOOLBOXES ALCOA WHEELS OPEN PLATFORM BODY WITH REMOVABLE ALUMINUM SIDE WALLS 645 CM X 250 CM X 80 CM LASHING EYES AND STAKE POCKETS HIAB X-HIPRO 302 E-7 CRANE 7X HYDRAULIC EXTENSIONS 2X OUTRIGGERS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 9,400 KG MAX LIFTING CAPACITY AT 1,850 CM 920 KG MAX WORKING HEIGHT 20.8 METERS OIL COOLER FOR CRANE HYDRAULICS ONLY 788 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, Year of construction: 2005, X AXIS TRAVEL: 10000 MM Y AXIS TRAVEL: 4000 MM Z AXIS TRAVEL (RAM): 1000 MM W AXIS TRAVEL (SPINDLE): 800 MM TOTAL Z + W AXIS TRAVEL: 1800 MM SPINDLE DIAMETER 160 MM SPINDLE MOTOR POWER 40 KW SPINDLE RPM: 3000 RPM SPINDLE TAPER ISO 50 DIN 69871/1A NR 02 SPEED RANGE RAM DIMENSIONS: 460 X 520 MM RAPID FEEDING 20000 MM/MIN ROTARY TRANSLATION TABLE MODEL MG 50 OF 2500 x 3500 mm , load 50 ton , 360000 position 0,001° stroke 2000 mm Nodjup Dcljpfx Ahnjlf HEIDENHAIN iTNC 530 CNC TOOL CHANGER 40 PLACES MANUAL UNIVERSAL HEAD ANCHOR PLATE 6000 X 2000 X 300 MM EXTERNAL REFRIGERATION TOTAL INSTALLED POWER 110 KVA YEAR : 2005

Year of construction: 1989, condition: excellent (used), Total width with widening: 2200 mm Width without widening: 2000 mm Height: 1250 mm Nlodod Rlp Rjpfx Ahnjf Height adjustment and swivel range with weight compensation Space requirement: 2200 x 1000 x approx. 2500 mm Weight: 160 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel Nsdpfx Ahod D R Szonolf -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg

Year of construction: 1997, condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -3 roller conveyors, rollers: Ø 900 x 560 mm -Load capacity: max. 7000 kg Nlodpfxofk Smmj Ahnef -Tires: solid rubber -External dimensions: 4520/3375/H580 mm -Own weight: 1130 kg

Year of construction: 1989, condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -rotating platform: 3460 x 2700 mm -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 7000 kg -Tires: solid rubber -Trailer hitch -External dimensions: 5530/2700/H590 mm Njdpfofk Smpox Ahnjlf -Own weight: 1410 kg

Condition: used, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm Nlsdjfcw Txepfx Ahnef -Weight: 42 kg

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 3000 mm Column width 1500 mm Nlodpfx Asfgyg Sjhnsf Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: good (used), three-phase motor, electric motor -Handover: in current condition as viewed Njdpfsd E Tfrox Ahnolf -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Nlodpfxof Dlzuo Ahnjf Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Nedpfx Ahstqtpponolf Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: good (used), Year of construction: 1999, Holtec cross conveyor with feed trough . 7 chain strands. Width 15.50 m. Conveyor length 5.0 m. Chain spacing: 3.75 - 4.0 - 2.4 - 1.8 - 1.5 - 1.35 m. Nsdpfx Aherdd I Ujnslf Sturdy chains 125 x 60 x 8 mm. Drive via SEW geared brake motor.

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Njdpsb A R Rgofx Ahnolf -Number: max. 7x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Drill bit spacing: 15 mm -Dimensions: 190/80/H110 mm -Weight: 8 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 7x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm Nljdjb A R Rrspfx Ahnjf -Number: 2 drill heads available -Price: per piece -Dimensions: 240/70/H80 mm -Weight: 6 kg

Condition: good (used), Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set Njdsb A N E Tspfx Ahnolf -Weight: 4.6 kg

Condition: good (used), end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers Nlodpfeb A Rixsx Ahnsf -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

Year of construction: 1982, condition: used, Machining units: from 3 sides Machine has 6 stations: with a horizontal main spindle Nodpfx Ascqydrjhnjlf Notes: Primarily suitable for precision-bored parts, but also for armature parts and shaft parts that need to be machined from two sides.

Condition: used, For sheet metal thickness up to: 7 mm Nsdpfx Ahodp U Apenjlf Blade length: 175 mm Round material up to: 20 mm Square material up to: 18 mm Space requirement: 1000 x 770 x 690 mm Hand-guided

Condition: good (used), Thread drill Manufacturer: Reishauer Type: 1 7/8 inches Nljdjdx Ug Ijpfx Ahnjf

Condition: used, mileage: 1,30,000 km, power: 228 kW (309.99 HP), first registration: 12/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: semi-automatic, Equipment: ABS, air conditioning, parking heater, IVECO 18310 Horsetruck 6-7 horse apartment with carriage trailer for 3-4 carriages. NEW TÜV inspection 6-7 horses, rear ramp, cellar under apartment, storage compartments around the truck, fresh water, 4 sleeping places, living room, / video surveillance for horse compartment, LG stationary air conditioning, heating, TV/Sat, fine wood, bathroom, shower, toilet, air conditioning, kitchen, seating area, microwave, refrigerator and freezer, external saddle cabinet, cruise control, air suspension, tow bar, and much more. Subject to errors/input errors & prior sale. * NET SALE POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT Available immediately//Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the area of horse transporters and trailers. Nledpfx Ajt Scgnehnsf Please make an appointment in advance. under under Richard Theurer / Andreas Theurer

Condition: used, mileage: 86,000 km, power: 320 kW (435.08 HP), first registration: 03/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: beige, gearing type: automatic, Equipment: ABS, air conditioning, compressor, parking heater, MB Actros 1844 Horsetruck for 7 Horses with Double Pop-Out // Registered as Motorhome /// Accommodates 6-7 horses, with side and rear ramps, pop-out section, underfloor storage beneath the living area, storage compartments all around the truck, fresh water tank, waste water tank. 4 sleeping berths, living room, Video surveillance and temperature monitoring in the horse area, LG stationary air conditioning unit, auxiliary heating, TV/Satellite, fine wood interior, Bathroom with shower and toilet, air conditioning, kitchen, leather seating group, microwave, refrigerator, external tack room, cruise control, alloy wheels, air suspension, tow hitch, and much more. Nedpfx Aouf Ixujhnelf Errors and omissions excepted & subject to prior sale. * NET SALE POSSIBLE. * Top leasing offers available. Vehicle currently under construction—delivery possible from April 2018. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse trucks and trailers. Please arrange an appointment in advance. Contact: Richard Theurer / Andreas Theurer

Condition: good (used), Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm Nlsdjgtu Uuepfx Ahnef -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW Nsdpfx Ahohzzb Rsnelf -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Condition: used, Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 Njdsf Tivlspfx Ahnelf -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg