Used Kdf for sale (59)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Podpfj Afxulox Airerc Buffers CE

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pedpfxs Adzmzo Airerc Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Pjdpfxsz E A T Ee Airerc 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: excellent (used), Year of construction: 2020, Edgebanding machine HOMAG EDGETEQ S-380 / KDF 650 C, year of manufacture 2020. Prodpfs Adubrsx Airec Single-sided edgebanding machine. Type OPTIMAT KDF 650 C. Screen-based operation. Matching XES 200 service station available separately; not included in the offer. Year of manufacture 2020 according to the nameplate. Collection from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport after consultation. Price upon request. Contact: DS-Maschinen – Owner David Schulz.

Condition: used, Year of construction: 2007, Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Prjdpfx As Agli Njirsc Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Supplier

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the piping shown, connected to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be stored Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 replaceable glue tanks for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Crosscut saw with 2 motors Predpfszn Afpex Airsc Combination milling unit, easily adjustable by hand for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual in folder format All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Very highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed rate: approx. 10 m/min Noise protection hood Retractable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch EC+ control panel for easy machine operation 4 programs can be saved. Machine in Highflex version, highly automated, switching between thin and thick edges via programs. Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, currently one glue pot available Top pressure: manual adjustment, PU rollers Infeed guide: manual adjustment with SIKO counter for chip removal Joining cutter with diamond cutters, sharpened Contact heating plate for preheating the panel Gluing section with automatic edge infeed for roll material up to 3 mm, switchable for direct and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edges Cut-off saw with 2 motors, straight or bevel cuts (program-controlled) Prsdpszzqwmefx Airjc Combination routing unit, pneumatically controlled for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the routing units and trimming blades have been replaced or resharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions: approx. 4550 x 1250 x 1550 mm (LxWxH) Weight: approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), BRANDT KDF 440 edger, well-equipped, CNC-controlled units operated from the control panel Liquids Pre-routing cutters Plate heating Glue application by roller Exchangeable tank Pneumatic preliminary guillotine Pressure rollers Trimming knives for final trimming Multi-routing unit, top and bottom, R1-R2 Corner rounding unit, R1-R2, pneumatically switchable Multi-profile edger, R1-R2 Flat edger Liquids Polisher Max. part height 60 mm Max. veneer thickness in roll 3 mm Pjdpfxs Af Uzae Airorc Feed rate max. 14 m/min with corner rounding 8 m/min Very good condition for a used machine Original mileage 400,000 meters

Condition: used, Year of construction: 2016, functionality: fully functional, operating hours: 5,300 h, power: 5 kW (6.80 HP), input voltage: 24 V, input current: 5 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,100 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 8 m/min, actuation type: mechanical, total height: 1,800 mm, total length: 4,200 mm, total width: 800 mm, overall weight: 1,800 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, BRANDT KDF 210 edge banding machines in good condition for sale. Servicing and repairs have been carried out by certified specialists. Additionally, a glue application unit for different glue colors can be purchased. Prjdey Aibvepfx Airjc

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Predpsythxmjfx Airoc Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Psdezuykcepfx Airjrc Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Predpfoz Rgpcox Airjc Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2011, Gluing, edge banding, capping, combination milling, corner copying, pull blade. Power consumption: 10 kW. Dust extraction: 1x 120 / 3x 60 / 1x 100 mm. Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Pjdpfx Aozx Tlneirerc Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Storage location: Nattheim.

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. Pedpfx Aijzb Iggjrjrc XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. Psdszzwhfjpfx Airjrc - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Feed Speed 11 m/min

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Corner rounding (two units – for faster processing) Scrapers Buffing/polishing unit Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Pjdpfx Asz Smxueirjrc Sprayers. Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Pjdpjyhqa Nsfx Airjrc

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Prodpfx Asx Dzw Nsirjc Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Pedpjyvr H Isfx Airerc Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Pjdpfx Asu E E D Deirsrc Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: excellent (used), BRANDT KDF 440, 1440 edger well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Pressure rollers Podszuztfspfx Airsrc Trimming balls for final cut Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Very good condition for a used machine Original mileage 144,000 meters

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked Prjdpfx Aoz Ea Dzoirjc - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Prsdpowwtpysfx Airjc

Condition: good (used), Year of construction: 2014, Description: see machine photos. Prodey Tm Nfepfx Airsc

Condition: used, Year of construction: 2006, Modell: Brandt O KDF 530 C Production year: 2006 Installed power: 11,4kW. Feed speed: 11m/min Workpiece thickness: 8-40mm. Edge thickness: 0,4-6mm. Premilling unit: Yes Gluing unit: Yes, EVA Psdpfxszkfu Sj Airerc End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Glue srapper: Yes Buffing unit: Yes