Used Cassel Metal Shark for sale (34,732)

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Dsdechuvropfx Akgskn Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Dkedpfx Aod H R Sxokgsn Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Dkjdpfx Aked N Dn Djgon Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, PULSOTRONIC M-Pulse2 BD HD 650X150 MFT | Metal Detector Manufacturer: PULSOTRONIC-Anlagentechnik GmbH Model/Type: M-Pulse2 BD-HD 650x150 MFT Serial number: 90008573 Year of manufacture: 2020 Power supply: 115/230 V | 16 A | 50-60 Hz Overall dimensions: 1700 x 1100 x 1250 mm Conveyor dimensions: 1200 x 610 mm Aperture: 650 x 150 mm System operating pressure: 4-6 bar The Pulsotronic M-Pulse2 BD HD, a professional conveyor metal detector, is an advanced X-ray and magnetic inspection system designed for the highest standards of safety and quality control in the food industry (meat, processing, bakery) and logistics. Thanks to the use of multi-frequency technology (MFT), the device features exceptional sensitivity in detecting ferromagnetic, non-ferromagnetic contaminants, and stainless steel, effectively eliminating the influence of the so-called "product effect" (common when inspecting moist meat, cheese, or fresh baked goods). The wide detection head with an aperture of 650 mm x 150 mm allows for the simultaneous inspection of a wide stream of loose products, large blocks of raw materials, or finished dishes in bulk and individual packaging. The integrated conveyor system, with dimensions of 1200 x 610 mm, guarantees complete stability in handling the product range. The system is prepared for an automatic pneumatic reject system (4-6 bar power supply required), which eliminates defective batches of goods without stopping the entire production line. Dedpfx Akszagnmogokn

Year of construction: 2026, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dksdefzblqjpfx Akgjn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, LOMA IQ3 | Metal Detector Manufacturer: LOMA SYSTEMS Model / Type: IQ3 Metal Detector Serial Number: QPB55-15-32664D Year of Manufacture: 2016 Power Supply: 110-240 V | 1 phase | 50/60 Hz Dksdpozagkujfx Akgon Current Consumption: 0.5 - 10 A Working Width: 250 mm Dimensions: 2200 x 500 x 100 mm The Loma IQ3 professional metal detector is one of the most reliable and technologically advanced solutions in the field of product inspection and quality control on production lines. The device has been designed to meet the stringent requirements of the food sector, particularly for meat, poultry, and fish processing plants, bakeries, and catering and ready-meal companies. Operating on the basis of advanced digital signal analysis, the detector effectively identifies and eliminates metal contaminants – both ferrous (Fe) and non-ferrous (Non-Fe), as well as hard-to-detect stainless steel (SS) – protecting consumers and expensive processing machinery from damage. The detector is equipped with an intuitive automatic product learning system ("Auto-Learn"), which allows for quick and precise calibration for a specific type of product (e.g., fresh meat, cheese, bread, finished products), taking into account the so-called product effect, which often generates false alarms in cheaper devices. The conveyor belt, with an optimal length of 2200 mm and a belt width of 500 mm, allows for smooth transport of products in bulk and in single or bulk packaging directly after the packaging process.

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. Dkedpfjzavzvox Akgen A stable loading device is available.

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Dksdpfjf Nwvfex Akgon

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm Dkodpor D Tnwefx Akgjn cutting length limitation knife sharpened Weight: 6,800 kg

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Dkjdpfjhwrhfex Akgjn Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Dkjdpfx Akshwri Sjgen Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: like new (used), Year of construction: 2021, cutting width (max.): 2,500 mm, cutting length (max.): 9,000 mm, Equipment: documentation/manual, PLASMA TUBE AND SHEET METAL COMBINATION Dkjdpfx Akev E Sabegen WORKING RANGE SHEET METAL MM 2500 X 9000 TUBE DIAMETER FROM MM 80 TO MM 550, TUBE LENGTH MM 9000 YEAR OF CONSTRUCTION 2021 HYPERTHERM BRAND PLASMA GENERATOR MODEL XPR 170

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Dodpfx Ajy S Sxcjkgekn Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Condition: good, functional

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Dkodpfxsy T Ik Re Akgen Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Dkodpjza A Ivsfx Akgjn Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 Dodpfeza A Hxsx Akgskn diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction Dodpfx Aowvv Rwjkgjkn - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. Dkjdpfx Ashwt H Aokgsn The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 Dksdjyxy S Dspfx Akgsn In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) Dkjdpjhmmfkofx Akgjn - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Djdpeif Sg Sofx Akgjkn Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm Djdpsq A I Upjfx Akgokn - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Dksdpfx Aksy S Abuegon Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Dsdpfxjy S Ezwo Akgekn Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades Dksdoy S Ezqjpfx Akgsn