Used Cell Expansion System for sale (34,677)

Condition: used, Year of construction: 2011, Single-end machine for cleaning glass bottles. Additional title: Bottle washing machine Capacity: 3000 bottles/h Length: 4,43 m Width: 2,60 m Height: 2,52 m Djdpfjy Nm Sxsx Aa Njut Base construction: Single-end machine Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Condition: used, Year of construction: 2004, The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system. Additional title: Repackaging of full pallets containing modular crates into pallets containing pi Capacity approx.: 200 crates/h Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm) Running direction: right -> left Djdpjy Nm Hvjfx Aa Nsut Operation / Control: on-site control unit / Siemens PLC Position: free standing Base construction: Square tube construction bolted to the floor Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Dusdpfxex T Aqfe Aa Not Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Year of construction: 2000, condition: used, Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h Additional title: Bottle washing machine Capacity: 39000 Bottles/h Length: 12700 mm Width: 4700 mm Height: 3500 mm Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-300 Position: free standing Base construction: Single-end machine, self-supporting housing on dome feet Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station Layer patterns: 22 bottles per basket row Dujdpew Taxfsfx Aa Nst

Year of construction: 1994, condition: used, Crate washer Model: RWZ-30-Sonder with high-pressure cleaning, without brushes Year of manufacture: 1994 Performance: 1500 crates/h Additional title: Crate washing system Capacity: 1500 Crates/h Length: 7600 mm Width: 1500 mm Height: 2700 mm Dodpsw Tax Eofx Aa Njut Formats: Module box in longitudinal run Material: stainless steel Position: free standing Periphery: 2 Kastenwender, 1 Scherben-Ableitkasten

Condition: used, Year of construction: 2010, PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 pressure-temperature ratio controller Type BMS7 The controller including control cabinet is to be completely renewed when the machine is purchased. Additional title: mixing unit 1983 - 2010 Capacity approx.: 150 hl/h Mixing and carbonating Length: 2,9 m Width: 2,5 m Height: 2,5 m Weight: 3000 kg Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7 Material: Stainless steel Dodpfx Asxbn Hrea Njut Position: Frame mounted Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel)

Condition: used, Externally mounted cooling unit with 2 fans and insulated 400 l glycol storage tank. Coolant: glycol Refrigerant: R-410 A Duedpfx Aaexwy D Uj Njt Additional title: externally mounted cooling unit with glycol buffer storage tank Cooling capacity: 14 kW Pressure compressed: 4,2 bar Pressure relaxed: 1,9 bar Gross volume glycol buffer tank: 400 l Power: 5,5 kW Current: 20 A Voltage: 380-415 V Frequency: 50 Hz Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

Condition: used, Year of construction: 1989, System for the secondary filtration of beer after the Kieselguhr filtration. Operating pressure: 10 bar Operating temperature: 140 °C Volume: 169 l Length: 4,10 m Duedpfxow Tmqbs Aa Net Width: 1,30 m Height: 2,0 m Weight: 1700 kg Material: stainless steel Position: standing Base construction: Frame Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system Dedovcqt Uspfx Aa Nsut

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Duodjvcqz Eepfx Aa Nst Total volume: 260 hl Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Dsdsvu Tthjpfx Aa Nout Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: new, Roller conveyor length 2000 mm Roller conveyor width 350 mm Djdpsy H N N Isfx Aa Njut

Condition: new, Roller conveyor length 3000 mm Roller conveyor width 350 mm Dusdpfxey H N Nue Aa Net

Condition: new, Roller conveyor length 6000 mm Duedpey H N I Rofx Aa Net Roller conveyor width 550 mm

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Dedpfx Aey N Duqsa Njut Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Year of construction: 2015, Faro Prime Measuring Arm Condition: Used Year of manufacture: 2015 Features: Djdpfoy Nl H Uex Aa Neut Temperature and overload sensors Compatible with multiple probes Internal counterbalance Wireless operation Benefits: Repeatability starting at 0.016mm Exclusive 6-axis version Unlimited rotational flexibility Versatile – suitable for both production and inspection rooms Lightweight construction thanks to new materials

Year of construction: 2016, condition: used, functionality: fully functional, Rotary Die Cutter RD-4055 (2016, Used) Configuration: - FFU-4055 - RD-4055 - SPC-4055 - BT-4055 - LDK-4055 Specifications Paper Feeding System: Air Hole Belt Paper Size (Before Processing): Max: 400 mm (W) × 550 mm (L) Min: 200 mm (W) × 275 mm (L) Processable Materials: Dusdpsy D Rzgefx Aa Njt Normal paper, coated paper, cardboard Non-processable Materials: Sheets with laminated (polypropylene-coated) backing or plastic film Material Thickness: 127–400 gsm Feeder Stack Height: 500 mm Production Speed: Up to 6,000 cycles/hour (die-cut roller)

Condition: excellent (used), functionality: fully functional, GHEBAL extraction system Dedpox H Ndfofx Aa Nsut Number of filter bags: 180 pcs Built-in rotary valve Fan positioned after the rotary valve Main motor power: 30 kW, can be converted to 22 kW Pneumatic filter bag shaking system Dimensions: 3550x200x7850 mm Weight: approx. 2000 kg

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Dusdovx Aqdepfx Aa Nst Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Duedpsytx T Iofx Aa Not Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2013, machine/vehicle number: 12052, total length: 4,700 mm, total width: 1,600 mm, total height: 2,400 mm, pressure: 6 bar, temperature: 80 °C, Eko-Pil KMPN 3500 Machine Data Designation: Eko-Pil KMPN 3500 Overall Dimensions: 4700 × 1600 × 2400 mm Max. Workpiece Dimensions: Ø 450 × 3500 mm Load Capacity: 200 kg Net Weight: 4000 kg Gross Weight: 6500 kg Operating Hours: 10,608 h Process Data Medium Temperature: 0 – 80 °C Tank Volume (Washing): 1160 l Dsdpfxsy H I Nyo Aa Nsut Tank Volume (Rinsing): 1050 l Water Pressure: max. 6 bar Water Connection: 1" Drive Data Motor Rotation Direction: right Performance Data Door Drive: 0.37 kW Roller Drive: 0.55 kW Main Pump (Washing): 7.5 kW Pump (Washing): 7.5 kW Drying Fan: 2.2 kW Fan: 0.3 kW Total Installed Power: 100 kW Heating Washing Basin: 5 × 6.0 kW Rinse Tank: 5 × 6.0 kW Drying: 4 × 4.5 kW Technical Data Connection: 3 × 400 V, 50 Hz

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: Dujdpfx Asy N Nm Soa Not X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg Duodpfx Aajyh Hp Rj Nst

Condition: used, Number of filters 50 St. Djdpfjy Nn A Sjx Aa Nsut ventilator 11 kW Fan 2 3 kW Briquette ~ 60 x 40 mm Press 4,5 kW Frequez-controlled extraction system Höcker Polytechnik with briquetting press RSN type ECO 40/12 for extracting chips and sanding dust from a small to medium-sized joinery or other woodworking shop with connected bunker and briquetting press. Including heat recovery and several extraction pipes with pneumatic slides to equip a company with approx. 5-10 machines.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Dsdpfx Aaoy Dp Hzo Nsut Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request