Used K30 for sale (155)

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm cutting angle 30-120 ° Table dimensions 1000x650 mm Ncodeyv Ntxspfx Ah Rjp

Condition: new, Year of construction: 2022, functionality: fully functional, Technical data = see data sheet PDF. Nsdjup D Alspfx Ah Rjcp

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 Ncjdpfx Ajhygztjh Rjp working stroke: 40 mm table height: 900 mm Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ncedpfx Asliuihsh Rep

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Drive power approx. 4 kW Ncsdpfx Ahjygua Dj Rjp

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm Ncsdpfx Asxabpdeh Rjp work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Boschert K30-120 Mini S Nedpfx Ahjw El Dfs Rjcp Angle-adjustable notching machine: - Adjustable from 30° to 120°. - Cutting capacity: 4 mm steel, 3 mm stainless steel - Very good condition - 1 year warranty as for a new machine - Immediately available

Condition: excellent (used), Talsa bowl cutter all S/S model K30. Knife Speed Variable between 500-3500rpm. 30 litre bowl. 3 knife assembly. with guard. Ncodpfx Ahjx Sykge Rep

Condition: used, Year of construction: 1989, Used notching machine from Boschert Nodpfx Asw Rvk Ejh Rjcp Model: K 30 120 Adjustable angle Pneumatic clamping of the corner Year of manufacture: 1989

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Nodpoyuw Tcsfx Ah Rocp Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Ncjdpfx Asxbfutsh Rsp

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Ncedpoxh D Nvofx Ah Rsp Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Nodpfx Ahjfv Hphe Rocp Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Upperroll diameter: Ø 137 mm Lowerroll diameter: ø 132 mm Bending capacity: 50 x 10 mm flat steel 40 x 40 x 3 mm square Ø 30 mm round Driven rolls: 2 Rolling speed: 2,1 - 4,3 m/min. Control: Footpedal left/righ turning Supplied with: 5 sets of rolls Footpedal Machine manuals Country of origin: Turkey Motor power: 0.75 kW Machine (l×w×h): 53 × 67 × 135 cm Machine weight: 190 kg Ncsdpeyw Ipnsfx Ah Rsp

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: Ncjdjyvvrnspfx Ah Rep - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 8584 m³/h -Total pressure: 4035 Pa Nsdpfsv Rf Hlox Ah Rscp -Engine: 15 kW 1460 rpm -Connection input: Ø 300 mm -Connection output: 250 x 400 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø760 x 200 mm -Dimensions: 570/1000/H1470 mm -Weight: 381 kg

Condition: good (used), Heating fan, electric heater, heating, electric heater, electric heating fan, heat exchanger, air heater, air heater, duct air heater, duct air heater Njdpfx Aofixa Esh Rjcp -JEVi .: 21023007 -Type: EFFK -Power: 30 kW -Voltage: 3 x 476 V -Dimensions: 460/350/H565 mm -Weight: 29 kg

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2023, operating hours: 195 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg Ncedpfx Ajyvq Tyjh Rsp CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AHK 30/1500 KS trailer crane construction year 2023 with only 195 hours. Machine is like new and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: good (used), mileage: 1,890 km, color: red, lifting height: 30,000 mm, Year of construction: 2017, operating hours: 1,890 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 1.500 kg Functional Njdpfxeyaqdle Ah Recp Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AHK 30/1500 KS trailer crane construction year 2017 with 1.890 hours from the first owner. Machine is in a nice condition and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 Ncodpfow Tykbex Ah Rsp • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025

Condition: used, mileage: 1,64,385 km, Year of construction: 2008, operating hours: 19,184 h, Drivetrain Nsdpfxexpdcfe Ah Rocp Drive: Wheel Weights Empty weight: 41.000 kg Functional Lifting capacity: 55.000 kg Identification Serial number: 30559558 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.29x2.7x3.66 Additional information Please contact PFEIFER GROUP for more information

Condition: new, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur Three-Way Tipper with Electric Pump and 600 mm Mesh Extension – HTK 3000.31 Base Price – €9,490, Our Special Offer Price – €8,510 incl. 19% VAT, incl. steel mesh extension and freight costs (pickup in Nuremberg), incl. registration certificate! Technical Specifications: * Trailer type – tandem axle * Construction – aluminium * Rear tipper – 45° * Three-way tipper – 45° * Unladen weight – 880 kg * Gross vehicle weight – 3,000 kg * Payload – 2,120 kg * Internal length – 3,140 mm * Overall length – 4,500 mm * Internal width – 1,750 mm * Overall width – 1,930 mm * Internal height – 350 mm + 600 mm steel mesh extension * Overall height – 1,260 mm + 600 mm steel mesh extension * Loading height – 745 mm * Tyres – 13 inch Standard features: V-drawbar, hot-dip galvanised * Chassis and tipping body hot-dip galvanised * Tipping bridge made from one piece of steel * Hand pump, optionally with electric hydraulic pump; from 3,000 kg GVWR, both electric and hand pump supplied as standard * Humbaur multifunction lighting * Removable side panels made of anodised aluminium Nsdoyw Eh Ijpfx Ah Rjcp * Rear tailgate with pendulum action * Lashing rings in the bed floor, lashing capacity 800 kg each * Jockey wheel * Plank shaft pre-installed for retrofitting aluminium ramps Description: The HTK three-way tipper impresses not only with our well-known high quality standards. It is equipped with a practical hand pump, which can be easily replaced with an electric hydraulic pump if required. For models with a permissible gross weight of 3,000 kg or more, both the electric and hand pump are included as standard. This makes tipping your loads easier than ever before!

Year of construction: 1998, condition: ready for operation (used), Immediately available ex location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, very few operating hours (like new) Motorized backgauge Backgauge controlled – 1000 mm Ncsdpoyw I Iqjfx Ah Rep Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Material thickness up to 10 mm Drive power: 15 kW Weight: 8 t Price: €8,500 plus VAT, ex location

Condition: used, Year of construction: 1999, * Lissmac Mini Wall Crane LMK 300 TFE * Year of manufacture: 1999 * Weight: 1,630 kg - Jib: 5 m - Max. load capacity: 300 kg - Hook height: 450 - 600 cm * Regularly serviced - German machinery - From first owner - Immediately available * Please schedule an appointment for viewing - Price is per unit - * Contact person: Mr. Andreas Vogel * The information provided online constitutes non-binding descriptions. * They do not represent guaranteed properties. * The seller is not liable for typographical or transmission errors. Ncsdjyxbycjpfx Ah Rjp * Subject to changes, errors, and prior sale.

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, color: blue, operation weight: 3,500 kg, lifting power: 1,600 kg/m, lifting height: 30,000 mm, tire condition: 80 %, Year of construction: 2012, operating hours: 2,500 h, Crane on trailer AHK 30-1600 Registered in Poland, UDT valid until September 2026 • maximum mast extension 30m • support width in standard position 6.25 x 5.90 m • support width with outriggers on one side 8.17 x 4.00 m • total trailer weight with crane approx. 3500 kg • drive controlled via radio system • wireless control with work parameter display • mechanism monitoring wire rope slack and winch operation • possibility of remote retraction of mast to transport position Mast construction • made of high-strength steel and aluminium alloys • integrated with chassis • fitted with a modern telescopic extension system Ncsdsyugt Eepfx Ah Rjp