Used Chiller/Heat Pump for sale (22,649)

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Fpedezz Tm Repfx Ap Djn Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Fpsdpfx Apsg Rhx Us Den Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Fpedpfexcimpsx Ap Dsn Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 135 kg, temperature: 80 °C, NILFISK 5M-150/750 HOT WATER PRESSURE WASHER NEW ELECTRIC HEATER (2x) The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even after prolonged use. With operating parameters of 150 bar and 750 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 750 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80 Heater power [kW]: 24 Detergent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 135 Fpodpfxjzulbge Ap Don EQUIPMENT: NEW ELECTRIC HEATER (2x) NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: like new (used), Year of construction: 2019, Hot air generator with 2 outlets and 1 flue outlet, designed for use with wood waste, suitable for heating an area of 500 square meters. Fpodpfx Aez D I Ilep Dsn

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Fpodjzui T Hepfx Ap Don Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Güntner Industrial Air-Cooled Condenser / Heat Exchanger, Used machine Manufacturer: Güntner GmbH & Co. KG Type: GCHC RD 080.1/22-43-3928527M Year of manufacture: 2017 Condition: Used, industrial execution Overall dimensions: 3250 x 2450 x 1230 mm Fpsdpfsz Eiyfsx Ap Djn Technical and operating parameters: Max. permissible pressure (PS): 32 bar (-50 °C / +100 °C) Test pressure (PT): 35.2 bar (Compressed air test medium) Volume (V): 6.35 liters Group of fluid / State: 2 / gaseous Fan motor details: VT03060U.1 / 2544 / 655 RPM / 0.921 A Ambient operating temperature: -30 °C / +50 °C Design / Operation: High-efficiency air-cooled condenser / heat exchanger unit engineered by Güntner. With a maximum allowable pressure rating of 32 bar, it ensures stable and safe heat rejection across standard commercial and industrial refrigeration circuits. Suitable Application Areas: External condenser unit for industrial refrigeration plants, cold storage facilities, and HVAC systems. Process cooling and refrigerant condensing applications. Heat recovery systems and heavy-duty industrial heat exchangers.

Condition: used, Technical details: feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Fpjdeu N Eriepfx Ap Djn Prices vary according to aggregate size. *

Condition: used, Year of construction: 2001, Technical details: pressure capacity: 145 bar charging voltage: 24 V / 12 V V weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Input 230 v / AC Fodpfx Apeu N E Hgo Djpn Output 12 V / 200A or 24 v / 100A *

Condition: used, Year of construction: 1976, Technical details: tank capacity: 35 l motor: 1,1 Flow rate: 12 l / min pressure capacity: ca. 24,5 bar total power requirement: ca. 1,2 kW Fpedpfxou N E Idj Ap Den dimensions L x W x H: 0,7 x 0,9 x 1,2 m For testing hydraulic systems Flow rate 1420 l/min. *

Condition: ready for operation (used), Busch vacuum pump center with control box Fpedpevx Avgefx Ap Dsn Busch type: 251-512, 023. 0.5 bar Qt. 6 liters Busch type: CB 0220 D / P 0.5/5 Pumps are tested. Siemens control TD 200 Control not tested Pumps are tested and working.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Fodpfebuqn Hjx Ap Dopn Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Year of construction: 2006, condition: like new (used),

Year of construction: 2009, condition: used, For sale are 8 free-flow centrifugal pumps from Pumpenfabrik Wangen, manufactured in 2009. These are the ESP model. Five of the eight free-flow centrifugal pumps have a motor. Quantity: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of manufacture: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 rpm: 1400/48 Fedpfsga Dtcsx Ap Djpn kW: 3/S1 V: 230/400 A: 11 / 6.30

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: Fsdpfxeykvdlo Ap Dopn - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), Vacuum pump Pfeiffer (28648) Type UNO 012A Suction capacity 12 m3/h 220 Volt Fsdpswtcr Ajfx Ap Dspn 0.55 kW Length 490 mm Width 220 mm Height 260 mm

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, gear pump -Manufacturer: Bucher, hydraulic pump, gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 7 pumps available -Price: per piece -Dimensions: 84/82/H100 mm Fpedpovwka Djfx Ap Dsn -Weight: 2.0 kg

Year of construction: 2004, condition: used, functionality: fully functional, used peristaltic pump, make: Delasco Paris, model: PCM JZ 237, year of manufacture 2004. This pump is in our warehouse in Oradea, mounted on stainless steel frame. Technical date. the JZ237 model offers the following standard performance parameters: Pump Type: Low-pressure peristaltic / Slurry pump Maximum Flow Rate: 300 to 600 liters per hour or 7,6 m3/hours Maximum Pressure: 1.5 bar Engine 400 V with power 1,5 kW direct-drive electric motor mounted on a steel base frame. Attached you have the pictures. This pump was making the liquid (milk and other liquids) transfers into a diary factory. This pump is sold with the pipes. Fpodpfx Apez D U Uls Djn Price 2.690 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), machine/vehicle number: -, Year of construction: 2021, input voltage: 400 V, tank capacity: 150 l, Maximum Operating Pressure (bar) 700 Cylinder Compatability Single-acting, Double-Acting Reservoir Capacity (cm3) 150000 Reservoir Capacity (litres) 150 Maximum Flow at Rated Pressure 1,30 l/min Oil Flow per Outlet at 700 bar (l/min) 1,30 Number of Outlets 8 Motor Size (kW) 15 Motor Hertz 50 Hz Motor Phases 3 Ph Motor Voltage 380-415 V Duty Cycle Extended Valve Function Advance / Hold / Retract Valve Operation Solenoid Valve Type 4-way, 3-position Power Source Fpodjqmfq Rjpfx Ap Den Electric Pump Control Pendant Motor Electrical Specification 400 V, 3 Ph, 50 Hz Weight (kg) 590 We have 15 of these hydraulic pumps. Same Condition. You can buy whole or just one.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 Fjdpfx Apexbhtro Dspn IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Leybold Trivac D4B vacuum pump with 3-phase motor, 230V/400V, 50Hz. Fsdpez Hcv Asfx Ap Dopn

Condition: used, Leybold Trivac D8B vacuum pump with 3-phase motor, 230V/400V, 50Hz. Fodpfx Apjz Hcvpj Dspn

Condition: new, functionality: fully functional, The range includes high-quality SAP pumps for coolant and emulsion, designed for use in various metalworking machines, such as band saws and circular saws, drilling machines, lathes, milling machines, CNC machines, and other industrial systems for cooling and circulating emulsions. Fpedpfx Asz Aqi Sjp Den They are suitable both for replacing an existing pump and for manufacturing or upgrading a cooling system on a machine. Several different models are available, including SA, PA 35, PA 70, PA 150, and PA 180, with varying flow rates, power outputs, and submersion depths. Depending on the model, the pumps are available for 230 V or 400 V connection. Advantages: - reliable operation, - easy installation, - various sizes and flow rates, - 230 V and 400 V versions, - suitable for coolant and emulsion, - several different submersion depths, - suitable for a wide range of machining machines. To select the appropriate model, please inform us of the voltage, required submersion depth, and desired flow rate.

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump Fpjdpez Hbqxefx Ap Dsn 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer.

Condition: used, mileage: 3,31,428 km, power: 265 kW (360.30 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 25,780 kg, maximum load weight: 220 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,200 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, seat heater, traction control, Vehicle location: Bovenden, rental location, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, leaf spring suspension, aluminum tank, low-noise G1, sunroof, 4-point hydraulic support, green environmental badge. Fpedpfx Apoz E Nitj Dsn Wheelbase: 4200 mm, Superstructure: Schwing-Stetter P2023 concrete pump with S31XT8 mast (approximate reach 30.5m), 7.5t front axle, H7 13t rear axle, bevel gear 233, disc brakes on front and rear axles, Telligent braking system with ABS and ASR, pipe rupture protection for braking system, rear axle stabilizer, steel bumper, PSM, distributor cockpit, reinforced clutch, construction site filter, on-board diagnostics 2, transmission oil cooling, auxiliary drive independent of transmission MB 1.4, transmission lock NMV. Operating hours concrete pump: approx. 4644h Operating hours mast: approx. 5928h ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!