Used Clamping Press for sale (20,122)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke Nwodpfx Aomck Ryeiqoi - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition Nwodpfx Aoxpqy Djiqsi

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Nodpfeya Iaqjx Aiqswi Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Rotex Air Lite V3 IVM” textile press Item for Sale: 1x Rotex Air Lite V3 IVM We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used machine, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. Nodpfxozpw E Hj Aiqjwi For more information, please feel free to contact us directly.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) Nsdpfx Aiew Nafkeqswi - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2000, length 1000 mm width 1250 mm Nwedszpbmnepfx Aiqsi height 2600 mm

Condition: used, Year of construction: 2000, length 800 mm Nwodpfx Aijzpbmhsqsi width 1250 mm height 1500 mm

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Nwedewyuqkopfx Aiqsi Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 Nwjdpfx Aezpffhjiqei - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 6 axles Location available upon request. Nwjdpfx Aiezniq Eoqei

Condition: excellent (used), Year of construction: 1999, Hours: approx. 24,000 6 axles Location available upon request. Nedpfx Aeznip Ijiqowi

Condition: excellent (used), Year of construction: 1999, 6-axis press brake Location available upon request. Nedpfxeznipuo Aiqowi

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Nwodpfxshik Eze Aiqji Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Nwedpfx Aijthuzpjqsi Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Nedpfx Aisznn Hlsqswi Weight: 80 kg Good condition

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. Njdpoy Hl Hpefx Aiqewi New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 9128, working width: 600 mm, total width: 800 mm, pressure: 6 bar, overall weight: 320 kg, compressed air connection: 6 bar, input current: 1 A, input frequency: 50 Hz, input voltage: 230 V, total height: 1,500 mm, total length: 1,000 mm, type of input current: AC, power: 0.15 kW (0.20 HP), Equipment: CE marking, VEIT BRISAY BRI-2390/211 Industrial Garment Ironing Press (2011) Professional Pneumatic Steam Ironing Press for Trousers, Denim & Garment Finishing The VEIT BRISAY BRI-2390/211 is a premium German-built industrial ironing press designed for high-quality garment finishing in demanding production environments. Manufactured by BRISAY Maschinen GmbH, part of the renowned VEIT Group, this machine combines pneumatic operation with steam-heated pressing technology to deliver consistent, professional pressing results. This machine was used in the former MASI JEANS factory for finishing denim garments and trousers before shipment. It remained in daily production until the factory closure and represents an excellent opportunity for garment manufacturers, laundries, textile finishing companies, or industrial pressing operations. The ergonomically designed foot-pedal operation allows fast, repeatable production while reducing operator fatigue. The shaped upper and lower bucks make the machine particularly suitable for pressing trouser tops, waist areas and similarly contoured garment sections. Technical Specifications Manufacturer: BRISAY Maschinen GmbH (VEIT Group), Germany Model: BRI-2390/211 Modification: 026 Machine Number: 9128 Year of Manufacture: 2011 Power Supply: 230 V, 50–60 Hz Electrical Power: 0.15 kW Current: 0.7 A Compressed Air: 0.6 MPa Steam Pressure: 0.45–0.60 MPa Condensate Pressure: Max. 0.05 MPa Weight: 320 kg Certification: CE marked Key Features • Premium German industrial quality from VEIT Group • Pneumatic foot-pedal operation • Steam-heated upper and lower padded pressing bucks • Designed for continuous production environments • Consistent pressing pressure for repeatable quality • Ergonomic operation for reduced operator fatigue • Heavy-duty industrial construction • Excellent choice for garment manufacturers and textile finishing facilities Nwedpfjzpax Asx Aiqoi Typical Applications • Trouser top pressing • Denim garment finishing • Jeans production • Workwear finishing • Uniform production • Jacket and garment pressing • Textile finishing operations • Industrial laundries • Commercial garment processing Condition Previously used in professional garment manufacturing. The machine remained in production until the closure of the MASI JEANS factory and shows normal cosmetic wear consistent with industrial use. Overall condition is good, and inspection is welcome prior to purchase. Video available. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm Nedozn I U Aopfx Aiqjwi -Weight: 11 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/180/H280 mm Nwedpfx Aiozn I Upjqei -Weight: 10.7 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping Nwedpfxezn I S Ue Aiqoi -Groove width 27 mm -Number: 3x mounting brackets available -Price: per piece -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Dimensions: 280/250/H320 mm -Weight: 13 kg Nwjdszn I Nyspfx Aiqei

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 36 mm Nodpfszn I Nmex Aiqewi -Groove: 72x22 mm -Dimensions: 370/205/H240 mm -Weight: 32.6 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm Nedezn I E Uepfx Aiqewi -Groove: 45x24 mm / 34x18 mm -Dimensions: 270/145/H200 mm -Weight: 15.5 kg

Condition: used, Year of construction: 2019, machine/vehicle number: 26488, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, table width: 400 mm, table length: 500 mm, overall weight: 116 kg, Equipment: CE marking, Transmatic TS 5 PA Industrial Pneumatic Heat Transfer Press (2019) Professional Swing-Away Heat Transfer Press for Hotfix Rhinestones, Decorative Stone Application & Textile Branding The Transmatic TS 5 PA is a premium industrial pneumatic heat transfer press manufactured by Transmatic S.r.l., Italy, designed for continuous, high-volume garment decoration and textile finishing. This machine was used in the former MASI JEANS factory for applying hotfix rhinestones, decorative crystals, heat-applied embellishments, logos and transfers to denim garments and fashion apparel. Its pneumatic operation provides consistent pressure across every pressing cycle, ensuring repeatable production quality while minimizing operator fatigue. The machine is supplied as a complete professional workstation and includes interchangeable lower platens, allowing fast changeovers for different garment sizes and applications. Technical Specifications Nwedpfx Ajzn U A Hsiqei Manufacturer: Transmatic S.r.l. (Italy) Model: TS 5 PA Serial Number: 26488 Year of Manufacture: 2019 Voltage: 230 V Power: 2.2 kW Operation: Pneumatic (external compressed air required) Control System: Digital colour touchscreen Heating Control: Electronic temperature and time control Pressure Adjustment: Integrated pneumatic regulator with pressure gauge Safety: Emergency stop button and CE certified Included Equipment • Complete Transmatic TS 5 PA heat transfer press • Digital touchscreen control system • Standard lower platen • Additional interchangeable small platen for sleeves, pockets, labels and small logos • Integrated pneumatic pressure regulator • Work light • Complete workstation Key Features • Premium Italian industrial quality • Designed for continuous production environments • Previously used for applying hotfix rhinestones and decorative stones to denim garments • Pneumatic automatic closing system for perfectly repeatable pressure • Swing-away upper platen for safe, ergonomic operation • Digital touchscreen with programmable temperature, pressing time and production counter • Exceptionally low recorded usage of only 1,498 pressing cycles • Fast changeover using interchangeable lower platens • Heavy-duty industrial construction for long service life • Excellent choice for garment manufacturers, decorators and textile finishing companies Typical Applications • Hotfix rhinestone application • Crystal and decorative stone application • Fashion garment embellishment • Denim decoration • Heat transfer printing • DTF transfers • Vinyl heat transfers • Logo application • Patch attachment • Label application • Sportswear production • Workwear branding • Promotional apparel • Textile finishing Condition Previously used in professional garment manufacturing. The machine powered a dedicated production process for garment decoration until the closure of the MASI JEANS factory. The digital touchscreen controller powers on and operates normally, and the production counter displays only 1,498 completed cycles. Overall cosmetic condition is very good with only minor signs of normal industrial use. Inspection is welcome prior to purchase. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Serial number: 8293 Nodpfx Aiezk Epvsqjwi Press force: 120 tons Bending length: 3100 mm Maximum stroke: 260 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Weight: 7500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm