Used Compressor Compair 2011 for sale (4,649)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir Dksdpfx Aozu Aibjptjt - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit Dedpfx Ajzuyzzeptskt - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Dsdpfezuyxyox Aptjkt Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Dksdpfxozuyxmo Aptot Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, total length: 2,000 mm, total width: 800 mm, total height: 1,850 mm, power: 15 kW (20.39 HP), volume flow: 147.6 m³/h, operating pressure: 8 bar, noise level: 73 dB, Equipment: refrigerant dryer, We are offering this Champion FM15 screw compressor in like-new condition, manufactured in 2020. Manufacturer: Champion Model: FM15 Year of manufacture: 2020 Less than 500 operating hours. Engine power: 15 kW Air flow at 8 bar: 2460 liters/minute Noise level: 73 dB(A) Pressure tank: 500 l Dimensions: 2000x800x1850 mm Dksdpfszwxnljx Aptjt DRYTEC MDD-100 air dryer with approximately 1000 operating hours. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 Dedpfx Aszwnykoptskt YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: like new (used), Parts shown by hand not come. Djdpfx Asgvl Dneptjkt

Condition: excellent (used), Kaeser DSD 238 compressor Dsdpfszbx Rcox Aptjkt 132 kW Year: 2011 The compressor is water-cooled, making it ideal for dusty environments. Operating hours: 30,000 Unit and engine replaced in 2019 Well-maintained and in perfect working order.

Condition: used, Year of construction: 1999, functionality: fully functional, operating pressure: 10 bar, We offer this used Ceccato RL 40/10 reciprocating compressor, manufactured in 1999. If you have any questions or require further information, please do not hesitate to send us a message or call us. Djdpfx Apjzxna Hetskt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Dedpfxezwmlrs Aptjkt Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 933 h, functionality: fully functional, power: 83 kW (112.85 HP), fuel type: diesel, volume flow: 11.5 m³/h, pressure (min.): 7.5 bar, pressure (max.): 7.5 bar, axle configuration: 1 axle, Fully functional screw compressor, Atlas Copco XAS186 DD, Deutz engine. Dutch registration. Dedpfxjzy Ad As Aptekt 11.5 m³ maximum, 8 bar. 933 operating hours.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Dkedpewz Ry Djfx Aptjt Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Djdpfx Aoxy S H Tsptskt

Condition: used, Year of construction: 2000, Technical details: feed pressure: 10 bar airflow volume: 1,06 m³/min Motor RPM: 3920 1/min total power requirement: 7,5 kW electrics - voltage/frequency: 400/50 V/Hz machine weight approx.: 250 kg dimensions L x W x H: 1,5 x 2 x 2 m Dodpfszuvwxsx Aptjkt Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Condition: used, Technical data - 2 tandem worktables, each with 6 pneumatic clamping devices - Travel range, X-axis: 3,550 mm - Travel range, Y-axis: 1,800 mm - Travel range, Z-axis: 750 mm - Continuously swiveling A-axis - Swivel range, C-axis: 370° - Rapid traverse speed, X-axis: 100 m/min Dksdpfx Apjzutrmstst - Rapid traverse speed, Y/Z-axis: 60 m/min - 2 + 2 tool positions with collet chucks - Tool holder standard: EN 430E / DIN 6499 - Cylindrical tool holder - Collet chuck size: ER32, tool diameter 1-20 mm - Spindle speed: 2,000-18,000 min⁻¹ - 2 electric motor spindles, each with 7.5 kW power - Operating pressure, compressed air: 6 bar - Compressed air consumption: 300 Nl/min

Condition: used, Year of construction: 2007, Compressor for pneumatic supply Additional title: air-cooled rotary compressor Operating hours: 24940 Capacity: 3,37 m3/min Operating pressure: 10 bar Rotational speed: 1460 rpm Power: 30 kW Voltage: 400 V Frequency: 50 Hz Length: 1280 mm Width: 800 mm Height: 1220 mm Djdpfszty R Tex Aptokt Weight: 700 kg Features: Oil type E2000

Condition: good (used), For sale: Dkodpeua Dqisfx Aptjt - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: good (used), Year of construction: 2011, 1x Geiger MidiLiner 15 Year of manufacture: 2011 Dsdpfx Ajzx D Igoptokt

Condition: good (used), Year of construction: 2011, operating hours: 9,026 h, Still RX70-35 Triplo 500 Freelift / Sideshift / 4th function / Diesel 2011 / 9030 hours A video can be sent via WhatsApp. Dodpfjzypuhex Aptskt We have a continuous stock; see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Technical specifications: Tank capacity: 500 L Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Width: 600 mm Height: 1300 mm Dsdpfxozvmrie Aptjkt

Condition: used, Technical specifications: Tank capacity: 500 l Max. pressure: 10 bar Number of cylinders: 2 x 2 cylinders Power supply: 400 V Engine speed: 1400 rpm Engine power: 2 x 4 kW Djdozvmmgopfx Aptskt Overall dimensions: Length: 3100 mm Width: 650 mm Height: 1300 mm

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: new trailer mounted 190cfm diesel engine rotary twin screw air compressor Make/model: MCWEL MC190S-I Free Ris Delivery : 190cfm Working Pressure :100psi Engine make/model: Isuzu 4JB1ZY-01 Rate output: 50kW , 2500rpm Dkedpfex Izktsx Aptot

Condition: good (used), Year of construction: 2008, operating hours: 1,408 h, machine/vehicle number: 89-4010241, USED AIRMAN 830CFM,150PSI AIR COMPRESSOR MODEL : PDSF830S Dodpfxjyrb Hno Aptekt SERIAL :89-4010241 YEAR : 2008 HOUR : 1408 AS SHOWN

Condition: good (used), Year of construction: 2008, operating hours: 4,731 h, functionality: fully functional, machine/vehicle number: 3829845, color: original, USED DENYO 1300CFM,185PSI AIR COMPRESSOR MODEL : DIS1300UB Dksdpfjvunwnjx Aptst S#3829845 YEAR : 2008 HOUR : 4731

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg Djdpjzulbtsfx Aptekt