Used Cordes Mc.200-250 for sale (25,653)

Condition: used, Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry Dkjdpoupbdyefx Adrjr -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Year of construction: 1998, condition: good (used), Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg Dedpfolyvcqox Adrskr

Condition: good (used), Pipe suspension, shaft ring suspension Dksdeb A Na Dopfx Adrjr -Load capacity: 3 tons -Chain length: 1100 mm -Weight: 96 kg

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm Dodpfx Adoyifwpjrskr - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps Dkjdpfexn Nlvex Adrer - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Wittmann Robot System W650 (2001) Dkodpfx Ajyyyr Tjdrjr • Hub Stroke X 1500; Y 2600; Z 3500 • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: used, Year of construction: 2015, x-travel 1200 mm y-travel 600 mm z-travel 600 mm control Dahlih-FANUC Solution C spindle tunring speed 15.000 U/min tool changer: 40-fach tool taper SK40 table-size 1.300 x 640 mm output 35 KVA Number of working hours ca. 18.263 h weight of the machine ca. ca. 7.500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. A robust vertical CNC machining center designed for the precision machining of steel, cast iron, and molds. It is characterized by high rigidity and flexibility. Technical features & accessories: - Lehmann 4th axis with tilting bridge and grid clamping table / tilting rotary table Dkjdpfxezgxgae Adror - 2x machine vises - Handwheel - Tool changer - Through-spindle coolant (TSC) - Coolant system - Chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, degree of automation: automatic, Description: For sale is a state-of-the-art JORNS JDB-200G double bending machine with extensive special equipment. The machine was developed for the economical production of complex edge profiles and enables the automatic bending of sheet metal parts without manually turning the workpiece. This reduces setup times and significantly increases productivity. The combination of the powerful CP300Twin control, Dynamic Positioning (DP), servo-hydraulic DSP drive, RH hydraulic system, automatic back gauge, and integrated SL3 shear makes this system the ideal solution for demanding applications in industrial sheet metal processing. The JDB series impresses with its high precision, short cycle times, and intuitive graphical programming. Automatic clamping fingers, servo technology, and the generous "G" tool geometry enable even complex bending profiles with maximum efficiency. Technical data: Manufacturer: JORNS Model: JDB-200G-RH-DP-SL3-1250-CP300Twin-6.4-DSP Machine type: CNC double bending machine Control: JORNS CP300 Twin Tool geometry: G geometry Material thickness adjustment: RH hydraulic Dynamic Positioning (DP) Double servo-hydraulic system (DSP) Integrated shear SL3 Automatic clamping fingers Automatic material feed Automatic loading and unloading system CNC-controlled back gauge High positioning and repeat accuracy Equipment: CP300 Twin graphic control RH hydraulic material thickness adjustment DP Dynamic Positioning DSP double servo pump system SL3 high-speed shear Automatic material feed Automatic clamping fingers Vacuum gripper system Servo-driven axes Hydraulic cooling LED operating status display Extensive safety equipment Application areas: Facade construction Roof and wall profiles Ventilation and air conditioning technology Metal and hall construction Housing and switch cabinet construction Sheet metal processing Industrial series production Condition: Used Technically functional Inspection under power is possible by appointment. Maintenance and service documents available upon request. Dodpszl Anljfx Adrjkr Scope of delivery: JORNS JDB-200G double bending machine CP300 Twin control Existing tools Documentation Accessories as per inspection Advantages at a glance: Highest productivity thanks to double bending technology No need to turn the workpieces Very short setup times Graphical CNC programming Precise production of complex profiles Automated material flow Robust Swiss industrial quality Ideal for series and small series production Location: Riesa, Germany Inspection / Loading: An inspection of the machine under power is possible at any time by prior appointment. If desired, we can assist with: Dismantling Loading Transport organization within Germany and Europe Commissioning by arrangement Errors, changes and prior sale reserved.

Condition: new, Year of construction: 2026, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 edgers, multirip saws, mechanization etc. We are your contact for the company Wravor in Germany. Dodpfotpwgxox Adrekr We are happy to offer you the right machines.

Year of construction: 2001, condition: used, Gantry Crane MC LEVAGE Capacity: 1 T Year of construction: 2001 Height under hook: 3500 mm Distance between uprights: 4400 mm Height under beam: 4000 mm Base width: 2300 mm Voltage: 380 V Dodpezmwm Eefx Adrskr

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Dedjzccgkopfx Adrjkr Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) Dkedpfewc Rk Eex Adrer The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Djdpfx Adeyx Hx Dsrokr Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: excellent (used), Self-loading press for gluing Orma Macchine Dkedpfxovq Rcxs Adror Working length 2500mm Working width 1200mm Automatic material loading Side material clamps

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Dsdpfxey Dgrne Adrskr Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Dksdpfx Adevzkylsrjr Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: Dodpfxezaf Ulj Adrskr • Manufacturer: HOLEX • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm • Interchangeable measuring tips • Calibration standards included • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: • micrometer 100–200 mm, • interchangeable measuring tips, • calibration standards, • adjustment wrench, • wooden case.

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Dsdpfx Adszk E H Ierjkr Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility.

Condition: excellent (used), Year of construction: 2020, Very well-maintained measuring system from Keyence. Dksdpfx Ajxgq Amedrer Type: XM-M1200 (XM-C1000) with PC XM-1500 Year of manufacture: approx. 2020 #8385

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Dkedpfx Adsw Sav Usrer

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Dksdoyw Tupepfx Adrjr Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. Dksdsw Rdtuspfx Adror • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: Djdpsyxtfwjfx Adrokr 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: used, Year of construction: 1999, functionality: unexamined, Daewoo Puma 200MC CNC lathe Year (1999) with Fanuc Series 18-T control, 12-station turret, live tooling, 6” chuck, tool setter, parts catcher LNS Turbo HB swarf conveyor Serial no: 211174 (2012) LNS Quick Load servo barfeed Dsdpfxjzmafwj Adrekr

Condition: good (used), Kraftspannfutter Dodscr S Eujpfx Adrskr 200 mm Durchmesser