Used Pans for sale (972)

Condition: used, Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production. Pgjdpfx Aexw Tgcsb Iew Specifications: Power: 15 kW

Condition: new, 3 tubs incl. 1 access ramp Dimensions L x D x H = 1870 x 1370 x 78 mm Wheel load (kg) 2000 kg Collection volume (l) 110 Material steel Load capacity 5000 kg/m² Galvanized surface Galvanized grating Approved for the storage of flammable liquids (H224-226) and substances of all water hazard classes fulfill all requirements of the German Water Resources Act (WHG) Sump tray made of galvanized steel Leak test in accordance with EN ISO 3452-1 For safe storage and protection during filling and transfer work Particularly low construction height Removable hot-dip galvanized grating Pgedperypb Ijfx Ab Iow Easy to combine for the protection of larger areas With access ramp as good as new, will be cleaned before delivery

Condition: used, Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist Podjdkx S Iepfx Ab Ijgw -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg

Condition: good (used), The price refers to a set of 4 units. The year of manufacture may vary by +/- 2 years. Multiple sets are available. Pgjdpfxswytlas Ab Isw

Condition: good (used), The price refers to a set of 4 units. The year of manufacture may vary by +/- 2 years. Multiple sets are available. Pgjdpfx Ajwytk Ajb Iow

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm Pgodpfx Ajxz D Uxjb Iew The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: ready for operation (used), Fanuc A20B-1001-0731/02A I/O Expansion Control Board , used, good condition, 100% functional Pgodei D U Haspfx Ab Iew

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Podpfx Asxz D Rtob Ijgw Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: ready for operation (used), Agie DBE-01 A3 Digital bidirectional expansion Nr. 625854-5 ,used, small traces of use, 100% functional, scope of delivery according to photos Pedsi D Tvkspfx Ab Iegw

Condition: ready for operation (used), Agie Digital bidirectional expansion DBE-01 A 625854-5 , used, minor signs of wear, 100% functional Pgedoi D Tvvjpfx Ab Ijw

Condition: ready for operation (used), Agie Digital bidirectional expansion DBE-01 A 613.810.1 , used, small traces of use, 100% functional Podpfsi D Tvrox Ab Isgw

Condition: ready for operation (used), Agie DBE-01 A3 Digital bidirectional expansion . 625854.5 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Pgsdpfji D Tvnsx Ab Ijw

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Podpfxjxur Ndo Ab Isgw Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: new, We manufacture expansion joints from high-grade steel sheet, thickness 3 mm. Preferred sections of two metres. Minimum order quantity: 20 linear metres. The profile is designed to ensure strong anchoring in concrete. At the same time, it can serve as a formwork between successive concrete pours. We produce to order and adapt to the floor thickness. Surfaces not in contact with concrete are coated with waterproof paint. OPTION FOR STAINLESS STEEL PRODUCTION Pgedpfx Abjwt Ihcj Isw We can also deliver a partially or fully hot-dip galvanized version. The price depends on the height of the ordered expansion joint, adapted to the floor thickness. At the bottom of the expansion joint, we can add a geotextile skirt to prevent concrete from getting behind the formwork. Prices are quoted net. A prepayment of 70% of the gross order value is required upon ordering. After payment, we issue a VAT invoice. Production time is progressive, for smaller quantities up to three weeks. Example net price for expansion joint of 40 cm height – PLN 295.00/linear m Example net price for expansion joint of 25 cm height – PLN 235.00/linear m Prices may change. We also manufacture pneumatic dispensers for dispersed concrete reinforcement, expansion joint cord inserters, expansion cut cleaning machines, several types of chamfering machines for expansion cuts, power trowels, and concrete discs.

Year of construction: 2015, condition: good (used), GE Healthcare Xuri Cell Expansion System W5 with Perfusion Module and CO2 Mixer Good working condition. Please check out our other listings as well. Psdpen I Uqrjfx Ab Iogw

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Pedsd Ha E Sepfx Ab Iogw strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, Beveling Grooving Machine for Expansion Joints in Concrete Floors and Channel Cutting in Concrete. On 4 wheels +2, includes 125 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 30 mm) and adjustable handle angle. Front and rear guides enter the cut to ensure straight milling and allow for angle and width adjustment. Extensive handle tilt adjustment. Supplied with 125 mm cutter. - Net price: 4,100.00 PLN (EUR 976) - Please send inquiries preferably by email. Beveling Grooving Machine for Expansion Joints in Concrete Floors, on 4 wheels +2, includes 180 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 40 mm); adjustable handle angle. Front and rear guides enter the cut ensuring straight operation during chamfering, allowing angle and width adjustment. Extensive handle tilt adjustment. Supplied with 180 mm cutter. - Net price: 4,800.00 PLN (EUR 1,143) Net Prices: - Expansion joint cleaning tool (without grinder) – 900.00 PLN (EUR 214) - Milling/Cleaning machine (dual function) for expansion joints – 3,250.00 PLN (EUR 774) - As above, galvanized and powder coated – 3,400.00 PLN (EUR 810) - As above, with handle-mounted switch – 4,200.00 PLN (EUR 1,000) - As above, with additional powder coating – 4,350.00 PLN (EUR 1,036) - Concrete milling machine on 4 wheels (includes 125mm "V" cutter) – 4,100.00 PLN (EUR 976) - Milling machine on 4+2 wheels, for deep milling up to 30mm, includes 125mm "V" cutter – 4,200.00 PLN (EUR 1,000) - Milling machine on 4+2 wheels, for deep milling up to 40mm (includes 180mm "V" cutter) – 4,800.00 PLN (EUR 1,143) - Spare 125mm "V" cutter – 290.00 PLN (EUR 69) - Spare 180mm "V" cutter – 540.00 PLN (EUR 129) - 200mm cutter – 440.00 PLN (EUR 105) - Expansion joint cord installer, 8-10mm – 370.00 PLN (EUR 88) - Expansion joint cord installer, 10mm-12mm – 390.00 PLN (EUR 93) - Expansion joint cord installer, >12mm – 420.00 PLN (EUR 100) - Side cord installer (for wall work) – 390.00 PLN (EUR 93) All items available from stock. Manufacturers of concrete milling machines for 125 and 180 mm cutters, specialized for chamfering expansion joint cuts, widening cracks in damaged concrete floors, and cutting channels in concrete flooring (suitable for underfloor heating installation). We operate 7/24. Pgjdpowuvm Asfx Ab Iow Shipping available on a cash-on-delivery or prepayment basis, or collection in Poznań. Please contact us by email.

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm Pjdpod Ha E Ijfx Ab Isgw coil weight: 6 t mandrel Ø: 508/610 mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm Pgedjbh S Dpjpfx Ab Iew coil weight: 2 t mandrel Ø: 406/508/610 mm

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm coil weight: 7,5 t mandrel Ø: 508/610 mm Pgsdped Ha E Aefx Ab Iow

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Pgjdpfx Abjbh S Hke Iow Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Dorn-Ø: 508 mm

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Pgodpebh Sz Ssfx Ab Ijw mandrel Ø: 450 mm

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm coil weight: 13 t Pjdpfxebh S Dyj Ab Iegw mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm Psdsbh S E Ejpfx Ab Isgw coil weight: 5 t mandrel Ø: 406/508 mm

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t Pgodpfxsupg Scs Ab Ijw coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009